la pavoni safety valve for sale

This Safety Valve Body is found on the older version PRE-Millennium Europiccola, and it works with older Stainless Steel sphere (eventually replaced by the Teflon Valve).

Note that we offer two tools to assist with removing and reinstalling this assembly, the Steam Valve Removal Tool to reach the nut inside the boiler and the Pavoni Skinny Wrench to hold the base of the MP- or P-37 in place while loosening/tightening.

PLEASE NOTE: As with many manufacturers who are making an effort to cut their production costs, La Pavoni has stopped finishing the inside piece and the lower part of the outside piece of this assembly. All, or at least most, of the unfinished portion is hidden by the drain tube cup. They are still properly finishing the top end.

2022 updated pressure release valve. This stronger valve will in most cases stop the occasional steam release from the pressure release valve caused by calcium blockages or foreign matter. For the Millennium edition (manufactured after 2000) only. Valvola di sicurezza con antivuoto (safety valve with anti-vacuum).

With nearly 30 years in the industry, Espresso Parts supplies cafe owners, baristas, and home brewers with the best products and real-world experience available. We are a dynamic team with the sole purpose of providing the best customer service experience.

Please Note, We Will Be Available for Emergency Call Outs As Always. Simply Telephone 01656 740646 Leave a Voicemail And We Will Contact You Back Immediately To Assist You

Northwest Kitchenware and Gifts provides some of the world"s best in espresso machines, cookware, glassware, kitchen gadgets, specialty small appliances and gourmet foods.

The boiler safety valve on this page can be found on older espresso machine models of La San Marco. There is for this part no la San Marco part reference number. This safety valve has a male M22 thread with a pitch of 1,5mm. The valve has been calibrated on 1,8bar. When the valve opens it can release up to 6,3 kg/h of steam. This valve is auto certified...Quantity

Newer machines have a small anti-vac valve combined with the safety valve. The safety valve seat is held down by a spring, and the inner anti-vac valve dangles freely and is closed by steam pressure from below. Both valves are in #19 in the pic below:

It"s supposed to hiss a little when the machine first builds some steam pressure, then close as the pressure builds. Just like the little button on a pressure cooker. Sometimes the inner anti-vac gets a little sticky and a gentle rap on the valve cap with a wooden spoon will cause it to close and quit hissing.

If residue in there is making them too sticky then you can usually fix that by disassembling and cleaning the valve and seats. If you do that it"s wise to use a thin 16mm wrench to make sure that you don"t unscrew the lower fitting nut while unscrewing the upper cap nut (#18 in the pic) . That washer and nut #45 and #46 is inside the boiler and you want those to stay snug with the lower fitting when removing the top nut.

Every La Pavoni Europcciola, La Pavoni Stradivari and La Pavoni Professional is equipped with a boiler safety valve/pressure relief valve. This item can be used with the pre-millenium and the millennium models. With the earliest models when there is no pressure switch this is the main form of pressure relief of the boiler. The Boiler relief valve...Quantity

Replacement anti-vacuum and safety valve core to suit current model La Pavoni Lever machines. If your machine has steam coming from the safety valve the you need to replace this component.