lagostina pressure cooker safety valve replacement quotation

Pressure cookers are not an innovative cooking technology, but seemingly slightly forgotten. They are known for a long time, even before ceramic hobs, modern ovens, bakeries and various facilitating small appliances that save a lot of manual work. The fact is, however, that their application is back - regardless of whether old antiques will be removed or a new purchase will be made.

The new kitchen stoves are almost identical in appearance to those of the past. The difference is that nowadays, fear of exploitation is eliminated little by little, because there is enough information available for proper operating instructions, possible malfunctions, implementation of advanced safety mechanisms and more. Experts recommend a new investment for a new type of dimension in cooking.

Closing mechanism - this is about the auto-lock function. For those models that do not have one, the problem may be with the locking mechanism or incorrect locking. This results in the inability to reach the correct pressure

Valve - The pressure valve may not be correctly installed. This is a common cause of under-pressure. Remember to clean the pan frequently, especially the valve. For this purpose, there is a certain technique that must be followed

Old Seals and Valve - Depreciation is a normal process that requires replacement. For these and other silicone and rubber components, it is recommended to replace it at about 18 months

Thick liquids and other thickeners - delicious dishes become cooked in a pressure cooker - fast and easy, but some products impede the process of reaching the required pressure. These are thick liquids and flour, which usually plays the role of thickener. It is recommended that they be eliminated or added thereafter

Handle - Used frequently and can loosen over time. May be the cause of shortage of high pressure. Check the goodness of the handle before setting the pan to cook your meal

Liquids - they are allowed, but must be maintained within certain limits. Otherwise, it will take a long time to reach the required pressure. Follow the instructions for the maximum that can be set so you have no problems

Frozen foods - Cooking frozen foods in a pan is allowed, but the process is prolonged. In them, the pressure builds up more slowly. Keep in mind that any frozen food extends its preparation by about 30 minutes

Valve Problems - The valve is a basic element that serves to maintain the desired pressure. It must be properly secured and replaced for at least a year and a half, as wear may be a major problem in this regard.

Depreciated seals- Worn pot seals need to be replaced again as they wear out over time. The cookware may also contain other rubber or silicone parts that may need more frequent replacement

Food that is cooked - If you put flour or some thick liquid in the pressure cooker, it can cause food to be thrown out. The spraying process occurs when the pressure is released

The valve is not well adjusted - steam is released through the valve, and it may not be properly adjusted. This is normal at first, but keep in mind that at this point you need to adjust yourself to eliminate excessive steam

The pan is too hot - the heat used must be adapted to the cooker. You may find it harder at first, but you will get used to it later. This may be a clear indication of the subsequent evaporation of steam, so take care of less pressure to reduce heat

Food is not prepared properlyThis is a common occurrence for anyone who starts using the appliance. Do not try the pressure cooker for the first time when you have guests. Foods that are slightly raw or overcooked may be due to an incorrect recipe or to:

Heat during pressure cooking - do not leave heat to a maximum so as not to remove dried, boiled or charcoal food. Adjust the heat level according to the needs of the different foods