magic chef safety valve pricelist

The pilot stays lit all the time and, when the oven is turned on, the flame gets bigger and surrounds the thermocouple. When the thermocouple senses the required heat, the safety valve opens to let the gas flow to the oven burner tube where the pilot flame ignites the gas.

GE gas range oven safety valve for round ignitors. 3.3 - 4.0 volts. 2.5 - 3.0 amps. Valve has male wire terminals. Reference number 164D2574G001 and 30100-17. ... More Info

GE gas range oven safety valve. This is a dual valve. 1/4" male terminals on top. 3/16" male terminals on bottom. Reference numbers 223C3389G001 and Y30148-14. ... More Info

Our 1934 Reliable Stove Co. ( a division of the American Stove Company, later becoming Magic Chef) 4 burner, 2 ovens, 1broiler and 1 warming section. Except for 2 safety valves…

The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that explained it was possible for the igniter to glow but if it was not drawing the correct amperage (because its resistance was too high) then the main brain would not allow the gas valve to open. So I took a look at the broiler and it had the same igniter. I measure the resistance of both of them and the oven igniters resistance was higher (don"t rememeber the reading) then I moved the Igniter from the broiler to the oven and the oven worked from there it was just a matter of ordering the part. End of story except for I am still doing all the cooking on the barbecue outside.