oberg fuel safety valve quotation

The Oberg Fuel Line Safety Valve is your first line of defense against a siphon fire in the event of an accident. This revolutionary, technically advanced in-line valve opens from the vacuum created by the fuel pump. There is no flow restriction whatsoever. When the engine stops the valve closes instantly stopping the flow of fuel. In the event that the fuel pump is knocked off or the fuel line is severed, the valve will close preventing siphoning from the fuel cell. This also prevents fire from seeking the fuel cell through the severed line. Your safety is #1

Be prepared for the worst when you install Oberg’s Fuel Line Safety Valve! This cutting-edge, in-line valve utilizes the vacuum created by your fuel pump to open and maintain a steady flow. Rest assured that if an accident were to occur – such as knocking off or severing of your fuel line -this revolutionary device will shut down to protect against any potential siphoning from, or fire reaching into ,your fuel cell. Safeguard yourself with this advanced safety feature today! Common fuel line attachment for race cars.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

Functions as a "fuse" in the fuel crossover line, automatically shutting off the flow of fuel if the line between a vehicle"s main and auxiliary tanks is torn away or obstructed.

3-1/8" length, 1-1/4" diameter.Technical InformationFlow—4.0 gpm minimum at 1.0 psi differential pressure.Leakage—Prior to actuation: zero leakage up to 5.0 psi.After actuation: maximum 1/2 oz. by weight up to 5.0 psi.Actuation—Tension: minimum 450 Ibs.; maximum 700 Ibs.Bending: minimum 450 in./Ibs.; maximum 700 in./Ibs.Environmental—Meets all performance requirements during and after exposure to salt spray, vibration, blended fuels and hot or cold temperature variations typical of tractor operating conditions.

Oberg filters have been protecting race engines for over 30 years now. Following the success of the original Oberg 600 Series, Tattle Tale, Daytona and UFO Filters, we are now offering the Billet 600 Series Oberg Filter, milled from 6061 T6 Aircraft Aluminum. This filter offers the same great features with less weight and more strength.

Fuel / Oil Filter, 400 Series, Oberg Style, 28 Micron Stainless Element, 8 AN Female O-Ring Inlet, 8 AN Female O-Ring Outlet, Aluminum, Polished, Each

Description:Fuel / Oil Filter, 400 Series, Oberg Style, 28 Micron Stainless Element, 8 AN Female O-Ring Inlet, 8 AN Female O-Ring Outlet, Aluminum, Polished, Each

Fuel / Oil Filter, 400 Series, Oberg Style, 60 Micron Stainless Element, 8 AN Female O-Ring Inlet, 8 AN Female O-Ring Outlet, Aluminum, Polished, Each

Description:Fuel / Oil Filter, 400 Series, Oberg Style, 60 Micron Stainless Element, 8 AN Female O-Ring Inlet, 8 AN Female O-Ring Outlet, Aluminum, Polished, Each

Fluid Filter, UFO, Oberg Style, 28 Micron Stainless Element, Low Pressure, 3/8 in Female O-Ring Inlet, 3/8 in Female O-Ring Outlet, Aluminum, Red Powder Coat, Each

Description:Fluid Filter, UFO, Oberg Style, 28 Micron Stainless Element, Low Pressure, 3/8 in Female O-Ring Inlet, 3/8 in Female O-Ring Outlet, Aluminum, Red Powder Coat, Each

Oberg filters have been protecting race engines for over 20 years now. Following the success of the original Oberg 600 Series, Tattle Tale, Daytona and UFO Filters, we are now offering the Billet 600 Series Oberg Filter, milled from 6061 T6 Aircraft Aluminum. This filter offers the same great features with less weight and more strength.

All Oberg Race Products are constructed using aircraft grade components. All components are machined to exacting standards to provide you with trouble-free yet affordable engine protection that pays for itself time and again.

Oberg Filters is a wholly owned subsidiary of Oberg Manufacturing, Inc. and specializes in manufacturing innovative engine products. Our products have protected race engines throughout the U.S. and abroad for over a quarter century. Through our extensive racing knowledge we have developed products for both the professional and weekend racer alike.