safety lifeline wire rope size pricelist

50 ft. (15.2m) kernmantle rope horizontal lifeline system with tensioner, energy absorber, two 6 ft. (1.8m) tie-off adapters and carrying bag.11/16″ kernmantle rope lifeline

Extremely lightweight horizontal lifeline systems which prioritize portablity- they are lightweight and easy to move from one job site to another. Sayfline cable systems are well-suited for harsh environments ir where minimal clearance exists.

The synthetic Sayfline system is lightweight, easy to use and engineered with all the 3M Fall Protection love and attention fall arrest equipment deserves. These horizontal lifeline systems are ideal where portability and flexibility is a must. Ideal for maintenance, bridgework, construction and other general industry applications.

Horizontal lifelines are more than a mere line connected between 2+ anchors, it is a secure attachment point for users working across a large horizontal surface. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points.Choosing the right horizontal lifelines depends on:The attachment structure - like I-beam, rebar stub, concrete, column or roof/

Lifeline material type - Synthetic lines are extremely lightweight and compact while galvanized or stainless steel options offer added corrosion and abrasion resistance and typically require less fall clearance.

Extremely lightweight horizontal lifeline systems which prioritize portability - this system is lightweight and easy to move from one job site to another. Sayfline cable systems are well-suited for harsh environments ir where minimal clearance exists.

The synthetic Sayfline system is lightweight, easy to use and engineered with all the 3M Fall Protection love and attention fall arrest equipment deserves. These horizontal lifeline systems are ideal where portability and flexibility is a must. Ideal for maintenance, bridgework, construction and other general industry applications.

DESCRIPTION: The US-96760 Lifeline System is designed for use as an anchoring means for up to 4 persons, used where fall protection and horizontal mobility are required. Per OSHA regulations, horizontal lifelines shall be designed, installed, and used under the supervision of a qualified person as part of a complete personal fall arrest system with a minimum safety factor of 2. Qualified person is defined as follows:

SYSTEM REQUIREMENTS: The US-96760 Lifeline System is designed for use with only ULTRA-SAFE approved components and sub systems. Substitutions or replacements made with non-approved components or subsystems may jeopardize compatibility of equipment and may affect the safety and reliability of the complete system.

The Gemtor™complete Horizontal Lifeline System is a simple, effective and economical means for achieving complete fall protection and worker mobility in a variety of elevated work sites.

Hands-free, 5/8" diameter rope grab designed as a mobile-type, energy-absorbing grab with less sensitivity to rope variations. Systems feature flexible counterweight to enhance performance. Complete system includes rope grab (5000335), flexible counterweight (5901583), 3" shock-absorbing lanyard (1240007), 3" tie-off adapter (1003000), carrying bag and choice of 50" lifeline (1202794) or 100" lifeline (1202844). Meets or exceeds all applicable OSHA regulations and ANSI Z359.15 standard.

Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 60" length rope, Bypass Shuttles (includes (2) polyester anchorage straps), MSA-10150414

MSA’s newly enhanced Gravity Temporary Horizontal Lifelines offer unique, exclusive bypass shuttles enabling two workers to share a line and pass each other while maintaining 100% tie-off.

The Gravity Temporary Synthetic Horizontal Lifeline, designed for easy installation and removal, suits many applications. System mounts to any suitable 5, 000-lb-rated anchorage point and uses many standard components. Integral line tensioner helps to ensure proper lifeline tensioning.

Gravity Dyna-Line Temporary Rope Horizontal Lifelines mount to 5000-lb. anchor points and can be rigged using many standard components. Integral line tensioner to help ensure proper lifeline tensioning before use. Dyna-Line horizontal lifelines include a 12-strand rope, minimizing fall distance

Gravity Sure-Line Temporary Cable & Rope Horizontal Lifelines mount to 5000-lb anchor points and can be rigged using many standard components. Lightweight system is rated for two people

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick, and is available with a variety of component configurations, including a shock absorber, positioning device, 18 inch extension lanyard, and 2 double-locking snap hooks.

Our Bulletin 440E Lifeline Rope Tensioner System (LRTS) is a unique cable (rope) tensioning system which enables quicker installation of cable actuated systems. The LRTS can also be used for applications other than cable actuated emergency stop systems.

A vertical lifeline assembly (VLA) is a complete connector kit for fall protection that consists of a high-strength poly-rope with a self-locking snap hook and a rope grab positioning device for you to use as your connector. A worker might typically use a fall protection vertical lifeline for applications like roofing, ladder climbing, general construction and tower climbing.

The Malta Dynamics temporary vertical assembly lifelines are made up of the strongest lifeline safety equipment available on the market today. The 3-strand poly-rope is reinforced to create a high-strength vertical lifeline that has a minimum breaking strength of 5,000 lbs. and supports a worker weight range from 130-310 lbs.

The poly-rope is UV resistant and tested to meet the lifeline rope specification for the Occupational Safety and Health Administration (OSHA). The vertical lifeline rope is terminated by stitching with a plastic cap and comes equipped with self-locking alloy steel snap hooks for a quick and reliable attachment to an anchor.

The poly-rope seamlessly connects with a rope grab positioning device. The rope grab acts as the connector between the full body harness and the poly-rope and must be locked into position to ensure fall hazards are avoided.

The Malta Dynamics rope grab is operated manually and is equipped with an 18” extension lanyard and a shock pack. The shock absorption pack is built into the leg of the rope grab and adds a premium feature to the extension lanyard that will help dissipate force on the body if a fall is arrested.

The Malta Dynamics VLA has been rigorously tested to the strict vertical lifeline requirements of OSHA and ANSI. The vertical lifeline satisfies OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-07 and ANSI A10.32-12.

Vertical lifeline assemblies available through Malta Dynamics are engineered to protect individual workers from falls while working at heights. When your employees need to work high above the ground, dependable VLA technology is essential for completing their jobs safely. Enable your team to finish jobs by the deadline and significantly reduce the chance of a serious injury occurring.

We supply teams with vertical lifeline assemblies in more than one size, so you have zero limitations on the clock. Pick up 25′, 50′ or 100′ VLAs to support workers in case of a fall. Our fall protection vertical lifeline assemblies are useful for jobs that require more than a traditional ladder to install systems or oversee repairs. Set your workers up to arrest and restrain falls with a single device.

There are multiple pieces of a vertical lifeline assembly for proper function as fall protection equipment. Malta Dynamics outlines some of the main parts of a VLA below:

A rope grab is a primary connector that bridges the gap between the safety harness and the rope that fastens to an anchor. The user can move rope grabs into various positions on a poly-rope. Your employees should set the rope grabs where they need to access an area for a job and avoid touching the device during a fall. The rope grab in a vertical lifeline assembly stops the rope from sliding up or down on its own.

The shock pack in a VLA fastens to the rope grab. These devices are responsible for absorbing the kinetic energy generated by a person in free fall. Your VLA systems call for shock packs to reduce the chances of workers experiencing severe physical trauma during an incident.

Purchasing vertical lifelines from Malta Dynamics comes with a long list of benefits. Review the details below to get an idea of how these systems can streamline your operations for maximum efficiency:

Our fall protection VLAs can be configured on the job quickly. Set up your VLA by fastening the included rope to a nearby anchor point with a snap hook. Employees should measure a safe distance from the anchor point to the edge of a walking surface, leaving extra room for the shock pack in case it deploys. Finally, the rope grab can be used to finalize your position on the poly-rope. Lock the rope grab and move about the space freely.

Vertical lifeline assembly systems are useful for those working in construction and other industries where employees work near rooftop edges. Use a vertical lifeline system whenever a ladder does not allow you to reach the working height required to finish a job safely.

Our professionals see project and safety managers purchase vertical lifeline systems for teams handling electrical installations, solar panels, plumbing equipment, railings, skylights, painting jobs and similar tasks at height.

Choosing a VLA system will require you to look at a few physical features and performance characteristics — rope size, minimum breaking strength and worker weight capacity range. For your convenience, Malta Dynamics carries VLA technology in 25′, 50′ and 100′ sizes to help your team complete jobs confidently. The 5,000-pound minimum breaking strength is suitable for demanding applications, and the ability to support workers weighing up to 310 pounds keeps your team flexible during assignments.

Looking to see all that comes with a VLA system is an excellent way for you to plan ahead. Our experts offer you complete vertical lifeline assemblies that come with poly-rope, a shock pack, a positioning device and an extension lanyard for a fast setup process.

The professionals at Malta Dynamics give you a one-of-a-kind shopping experience with a user-friendly site that makes it easy to acquire the fall protection vertical lifeline assemblies you need for success. Our product descriptions provide you with the information you need to make an informed decision for your construction business. Know each VLA’s capabilities long before you buy.

Malta Dynamics’ offerings help you follow your field’s OSHA and ANSI guidelines and significantly reduce your chances of receiving fines. Get the most features for a value price when you buy VLAs from our store. For more information about our vertical lifelines, reach out to Malta Dynamics online.

Our lifeline assembly is a necessary tool for fall protection. Made of solid and durable polyester, wear-proof for long-lasting use. The rope comes with a secure energy absorber, adjustable rope grab and solid steel snap hooks. It is ideal for ensuring security for people who need to work at a high altitude.

The fall protection rope is 25 ft in length and 0.55” in diameter. The 310 lbs weight capacity is enough for you and your equipment, ensuring your high workplace security.

Our vertical lifeline assembly is made of high-quality polyester rope, durable, and wear-proof for a long lifespan. And the braided rope is more sturdy than the twisted rope.

Our vertical lifeline rope has two steel swivel snap hooks for an easy and sturdy connection with your other security equipment. They are durable and stable.

This roofing rope is ideal for tree climbing, hiking, rappelling, rescue, etc. And it is perfect for people who perform work services to sustain themselves from falling at high altitudes.