secure wire rope pricelist

US Producer Price Index: Metals and Metal Products: Ferrous Wire Rope, Cable, Forms Strand is at a current level of 374.91, up from 374.68 last month and up from 317.27 one year ago. This is a change of 0.06% from last month and 18.17% from one year ago.

Continental Cable employs 65 people specializing in the manufacture of custom mechanical wire rope cable assemblies. Other product lines include stainless steel and galvanized aircraft cable, a complete line of cable related hardware and tools and plastic coated cable.

Wire rope clips are widely used for making end terminations. Clips are available in two basic designs; the U-Bolt and fist grip. The efficiency of both types is the same.

When using U-Bolt clips, extreme care must be exercised to make certain that they are attached correctly; Incorrect installation can reduce the working load limit by 40%. Below are general guidelines for installing wire rope clips.

The saddle shall be placed on the live end of the wire rope, with the U-bolt on the dead-end side—Remember the well-known saying: “Never saddle a dead horse.” Use at least two or three wire rope clips to secure the ends properly to the length of the rope, and tighten nuts evenly one by one until reaching the recommended torque.

Step 1. Turn back a specified amount of rope from the thimble or loop. The first clip must be placed one bridge width from the turned back rope tailor dead end of the rope, Apply U-Bolt over dead end of wire rope – live end rests in the saddle (Never saddle a dead horse!) Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.

Step 3. When three or more clips are required, space additional clips equally between the first two – take up rope slack – tighten nuts on each U-Bolt evenly, alternating from one nut to the other until reaching recommended torque.

In accordance with good rigging and maintenance practices, the wire rope end termination should be inspected periodically for wear, abuse, and general adequacy. Periodically re-tightening of the nuts must be done at 10.000 cycles (heavy usage), 20.000 e.g. every 3 months, 6 months, annually.

Malleable clips are to be used for making eye termination assemblies only with the right regular lay wire rope and only for light-duty uses with small applied loads, such as handrails, fencing, guard rails, etc.

If you have any wire rope clips questions, you can contact us by email at info@hilifting.com. We will be glad to share with you more useful information.

Industrial Wire Rope Fittings, SS Wire Rope Fittings, Wire Rope Cable End Fittings, Galvanised Wire Rope Fittings, Wire Rope Clips Provider & Exporter

Multinox Inc is the leading Manufacturer and Supplier of. You can use our Industrial Wire Rope Fittings for safely rigging your equipment to a support. The Wire rope fittings processed by us is used extensively in the marine, architectural, yacht ringing and other structural applications. The Stainless Steel Wire Rope manufactured by us is our prime best-sellers throughout the global market. The superior grade raw materials used in the manufacturing process by us result in the exceptional holding strength and lifting strength of wire and cable ropes. OurSS Wire Rope Fittingsare portable and lightweight for optimal usage by our customers worldwide.

We manufacture varieties of Wire Rope fittings that are pull-tested and proof-tested. There are numerous options available in the size, shape and further customizations of the products belonging to our catalog of Wire Rope Fittings. The Wire Rope Cable End Fittings provides nominal breakage strength and is best-suited for the aircraft cable fittings. However, ourGalvanised Wire Rope Fittingscan be crimped into many different shapes, like round, hex, square etc.

These Wire Rope Clips help in securing wire rope ends on turning back from a loop. They have a wide range of applications in the architectural and marine applications. We manufacture Wire Rope Fittings with extra threading and ultimately finished based on the requirements of our customers. The highly economical pricing of our products and affordability draws our customers towards us daily. TheSingle Wire Rope Fittingmanufactured by us is rightfully exercised in lifting lightweight air packed goods or equipment.

Here at The Wire Rope Company we specialist in commercial standard galvanised and stainless-steel wire rope. We stock a large range of stranded steel wire rope that is available in various thicknesses to suit any type of application. Our wire rope is made up of several strands of metal wire twisted into a helix which forms a high strength composite rope.