seismic wire rope pricelist

Loos & Co’s Seismic Bracing Cable Assemblies are the very best cable sway braces! Loos & Co. manufactures the most cost-effective, code-compliant seismic bracing system on the market today. The system installs in half the time of conventional rigid pipe bracing systems. The AISI Standard for structural cable includes a requirement for pre-stretching cable, a requirement for using permanent end fittings that are recommended by a cable manufacturer, and a requirement that permanent end fittings develop the break strength of the cable. The Loos & Co., Inc. Seismic Bracing Cable products satisfy these requirements and, therefore, may be used with the best safety factor. This reduces the sizes required to carry the earthquake loads and the smaller sizes employ less expensive end fittings that are faster to install.

US Producer Price Index: Metals and Metal Products: Ferrous Wire Rope, Cable, Forms Strand is at a current level of 374.91, up from 374.68 last month and up from 317.27 one year ago. This is a change of 0.06% from last month and 18.17% from one year ago.

Seismic bracing products can be categorised in two distinctive types: Rigid Braces and Steel Wire Rope Braces. A single rigid brace can work under tension or compression loading and they are very popular with fire fighting and sprinkler installers. Having said that steel wire ropes offer cost effective solution even though they can only resist tension loads and two braces are required at single restraint point. Where vibration isolation is of a concern rigid bracing can not be used and the only alternative is steel wire ropes. They are quick to install and offer great flexibility. Seismic bracing is most commonly used in protecting suspended MEP services (ducts, pipes, cable trays…) and equipment (fans, AHU, FCU…).

The masonry mesh made of punched metal even gives more strength to brick walls than the masonry mesh made of wire VR-1 with a diameter of 3 mm with a cell of 100x100 mm

If the building is being built in a seismic zone, then the use of a patented mesh will significantly increase the strength of the building to destruction.

If you need a masonry mesh made of wire VR-1, then we also supply it. You can get acquainted with this grid on the page about the usual masonry grid .

Today, hardware factories have begun to produce a wire of a periodic profile with a diameter that is not provided for by GOST - 2.8-2.9, or even 2.7. Most construction organizations, with their demand, have prompted manufacturers to produce masonry mesh from wire below 3 mm.

It is significantly cheaper than masonry mesh made of VR-1 wire, even taking into account the fact that you will receive it with the help of SAT, Nova Poshta, Delivery or other transport companies.