shell naturelle s2 wire rope lubricant a factory

Shell Naturelle S2 Wire Rope Lubricant A is a high performance fully biodegradable grease for use on open gears, wire ropes and cables. This product is formulated with renewable base fluids and contains a select blend of additives to offer corrosion resistance and high load carrying performance. Shell Naturelle S2 Wire Rope Lubricant A offers high resistance to water wash off due to its outstanding adhesion properties.

VGP Compliant - Shell Naturelle S2 Wire Rope Lubricant A is an Environmentally Acceptable Lubricant under the definitions of the USA EPA 2013 Vessel General Permit.

Excellent Corrosion Protection - Formulated to include special anti corrosion additives to offer the best possible protection from corrosion, even under the influence of seawater.

Low toxicity towards the environment - Made from >60% renewable raw materials. Shell Naturelle S2 Wire Rope Lubricant A is also classed as minimally toxic and non-bioaccumulative.

Shell Naturelle S2 Wire Rope Lubricant A is a high performance fully biodegradable grease for use on open gears, wire ropes and cables. Supplied in an 18kg Pail.

Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

1.1 Product identifier Trade name : Shell Naturelle S2 Wire Rope Lubricant A Product code : 001F2974

1.2 Relevant identified uses of the substance or mixture and uses advised against Use of the : Automotive and industrial grease. Substance/Mixture

1.3 Details of the supplier of the safety data sheet Manufacturer/Supplier : Shell Markets (Middle East) Limited 8th floor, Dubai Convention Tower Za"abeel 307 Dubai United Arab Emirates Telephone : (+971) 43035333 Telefax : (+971) 43321591 Email Contact for Safety : If you have any enquiries about the content of this SDS please Data Sheet email lubricantSDS@shell.com

Based on available data this substance / mixture does not meet the classification criteria. Classification (67/548/EEC, 1999/45/EC) Not a hazardous substance or mixture.

1 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

Hazard statements : PHYSICAL HAZARDS: Not classified as a physical hazard under GHS criteria. HEALTH HAZARDS: Not classified as a health hazard under GHS criteria. ENVIRONMENTAL HAZARDS: Not classified as an environmental hazard under GHS criteria.

Precautionary statements : Prevention: No precautionary phrases. Response: No precautionary phrases. Storage: No precautionary phrases. Disposal: No precautionary phrases.

2.3 Other hazards This mixture does not contain any REACH registered substances that are assessed to be a PBT or a vPvB. Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin resulting in disorders such as oil acne/folliculitis. Used grease may contain harmful impurities. High-pressure injection under the skin may cause serious damage including local necrosis. Not classified as flammable but will burn.

Hazardous componentsChemical name CAS-No. Classification Concentration EC-No. [%]Alkyl thiadiazole 91648-65-6 Aquatic Chronic3; 5 - 10 293-927-7 H412Dialkyl thiophosphate 268567-32-4 Skin Sens.1B; 0,1 - 0,9ester 434-070-2 H317 Eye Dam.1; H318 Aquatic Chronic3; H412 For explanation of abbreviations see section 16.

2 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

4.1 Description of first aid measures General advice : Not expected to be a health hazard when used under normal conditions.

Protection of first-aiders : When administering first aid, ensure that you are wearing the appropriate personal protective equipment according to the incident, injury and surroundings.

If inhaled : No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice.

In case of skin contact : Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention.

When using high pressure equipment, injection of product under the skin can occur. If high pressure injuries occur, the casualty should be sent immediately to a hospital. Do not wait for symptoms to develop. Obtain medical attention even in the absence of apparent wounds.

When using high pressure equipment, injection of product under the skin can occur. If high pressure injuries occur, the casualty should be sent immediately to a hospital. Do not wait for symptoms to develop. Obtain medical attention even in the absence of apparent wounds.

In case of eye contact : Flush eye with copious quantities of water. Remove contact lenses, if present and easy to do. Continue rinsing. If persistent irritation occurs, obtain medical attention.

If swallowed : In general no treatment is necessary unless large quantities are swallowed, however, get medical advice.

4.2 Most important symptoms and effects, both acute and delayed Symptoms : Oil acne/folliculitis signs and symptoms may include formation of black pustules and spots on the skin of exposed areas. Ingestion may result in nausea, vomiting and/or diarrhoea.

3 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

High pressure injection injuries require prompt surgical intervention and possibly steroid therapy, to minimise tissue damage and loss of function. Because entry wounds are small and do not reflect the seriousness of the underlying damage, surgical exploration to determine the extent of involvement may be necessary. Local anaesthetics or hot soaks should be avoided because they can contribute to swelling, vasospasm and ischaemia. Prompt surgical decompression, debridement and evacuation of foreign material should be performed under general anaesthetics, and wide exploration is essential.

High pressure injection injuries require prompt surgical intervention and possibly steroid therapy, to minimise tissue damage and loss of function. Because entry wounds are small and do not reflect the seriousness of the underlying damage, surgical exploration to determine the extent of involvement may be necessary. Local anaesthetics or hot soaks should be avoided because they can contribute to swelling, vasospasm and ischaemia. Prompt surgical decompression, debridement and evacuation of foreign material should be performed under general anaesthetics, and wide exploration is essential.

5.1 Extinguishing media Suitable extinguishing media : Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. Unsuitable extinguishing : Do not use water in a jet. media5.2 Special hazards arising from the substance or mixture Specific hazards during : Hazardous combustion products may include: A complex firefighting mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be evolved if incomplete combustion occurs. Unidentified organic and inorganic compounds.5.3 Advice for firefighters Special protective equipment : Proper protective equipment including chemical resistant for firefighters gloves are to be worn; chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus must be worn when approaching a fire in a confined space. Select fire fighter"s clothing approved to relevant Standards (e.g. Europe: EN469). Specific extinguishing : Use extinguishing measures that are appropriate to local methods circumstances and the surrounding environment.

4 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

6.2 Environmental precautions Environmental precautions : Use appropriate containment to avoid environmental contamination. Prevent from spreading or entering drains, ditches or rivers by using sand, earth, or other appropriate barriers.

6.3 Methods and materials for containment and cleaning up Methods for cleaning up : Prevent from spreading or entering into drains, ditches or rivers by using sand, earth, or other appropriate barriers.

6.4 Reference to other sections For guidance on selection of personal protective equipment see Chapter 8 of this Safety Data Sheet., For guidance on disposal of spilled material see Chapter 13 of this Safety Data Sheet.

General Precautions : Use local exhaust ventilation if there is risk of inhalation of vapours, mists or aerosols. Use the information in this data sheet as input to a risk assessment of local circumstances to help determine appropriate controls for safe handling, storage and disposal of this material.

7.1 Precautions for safe handling Advice on safe handling : Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.

7.2 Conditions for safe storage, including any incompatibilities Other data : Keep container tightly closed and in a cool, well-ventilated place. Use properly labeled and closable containers.

5 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

Packaging material : Suitable material: For containers or container linings, use mild steel or high density polyethylene. Unsuitable material: PVC.

Container Advice : Polyethylene containers should not be exposed to high temperatures because of possible risk of distortion.

No biological limit allocated. Monitoring Methods Monitoring of the concentration of substances in the breathing zone of workers or in the general workplace may be required to confirm compliance with an OEL and adequacy of exposure controls. For some substances biological monitoring may also be appropriate. Validated exposure measurement methods should be applied by a competent person and samples analysed by an accredited laboratory. Examples of sources of recommended exposure measurement methods are given below or contact the supplier. Further national methods may be available. National Institute of Occupational Safety and Health (NIOSH), USA: Manual of Analytical Methods http://www.cdc.gov/niosh/ Occupational Safety and Health Administration (OSHA), USA: Sampling and Analytical Methods http://www.osha.gov/ Health and Safety Executive (HSE), UK: Methods for the Determination of Hazardous Substances http://www.hse.gov.uk/ Institut für Arbeitsschutz Deutschen Gesetzlichen Unfallversicherung (IFA) , Germany http://www.dguv.de/inhalt/index.jsp L"Institut National de Recherche et de Securité, (INRS), France http://www.inrs.fr/accueil

8.2 Exposure controls Engineering measuresThe level of protection and types of controls necessary will vary depending upon potential exposure conditions. Select controls based on a risk assessment of local circumstances. Appropriate measures include: Adequate ventilation to control airborne concentrations.

General Information: Define procedures for safe handling and maintenance of controls. Educate and train workers in the hazards and control measures relevant to normal activities associated with this product.

6 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

Ensure appropriate selection, testing and maintenance of equipment used to control exposure, e.g. personal protective equipment, local exhaust ventilation. Drain down system prior to equipment break-in or maintenance. Retain drain downs in sealed storage pending disposal or subsequent recycle. Always observe good personal hygiene measures, such as washing hands after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Discard contaminated clothing and footwear that cannot be cleaned. Practice good housekeeping. Personal protective equipment Personal protective equipment (PPE) should meet recommended national standards. Check with PPE suppliers.

Eye protection : If material is handled such that it could be splashed into eyes, protective eyewear is recommended.

Remarks : Where hand contact with the product may occur the use of gloves approved to relevant standards (e.g. Europe: EN374, US: F739) made from the following materials may provide suitable chemical protection. PVC, neoprene or nitrile rubber gloves Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical resistance of glove material, dexterity. Always seek advice from glove suppliers. Contaminated gloves should be replaced. Personal hygiene is a key element of effective hand care. Gloves must only be worn on clean hands. After using gloves, hands should be washed and dried thoroughly. Application of a non-perfumed moisturizer is recommended.

For continuous contact we recommend gloves with breakthrough time of more than 240 minutes with preference for > 480 minutes where suitable gloves can be identified. For short-term/splash protection we recommend the same, but recognize that suitable gloves offering this level of protection may not be available and in this case a lower breakthrough time maybe acceptable so long as appropriate maintenance and replacement regimes are followed. Glove thickness is not a good predictor of glove resistance to a chemical as it is dependent on the exact composition of the glove material. Glove thickness should be typically greater than 0.35 mm depending on the glove make and model.

Skin and body protection : Skin protection is not ordinarily required beyond standard work clothes. It is good practice to wear chemical resistant gloves.

Respiratory protection : No respiratory protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices,

7 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

precautions should be taken to avoid breathing of material. If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, select respiratory protection equipment suitable for the specific conditions of use and meeting relevant legislation. Check with respiratory protective equipment suppliers. Where air-filtering respirators are suitable, select an appropriate combination of mask and filter. Select a filter suitable for the combination of organic gases and vapours [Type A/Type P boiling point >65°C (149°F)].

Environmental exposure controls General advice : Take appropriate measures to fulfill the requirements of relevant environmental protection legislation. Avoid contamination of the environment by following advice given in Chapter 6. If necessary, prevent undissolved material from being discharged to waste water. Waste water should be treated in a municipal or industrial waste water treatment plant before discharge to surface water. Local guidelines on emission limits for volatile substances must be observed for the discharge of exhaust air containing vapour.

Colour : beige Odour : Slight hydrocarbon Odour Threshold : Data not available pH : Not applicable Drop point : >= 125 °CMethod: IP 396

Initial boiling point and : Data not available boiling range Flash point : Method: Unspecified Remarks: Not applicable

8 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

Vapour pressure : < 0,5 Pa (20 °C) estimated value(s) Relative vapour density : > 1estimated value(s) Relative density : 0,900 (15 °C)

Partition coefficient: n- : Pow: > 6(based on information on similar products) octanol/water Auto-ignition temperature : > 320 °C

Viscosity Viscosity, dynamic : Data not available Viscosity, kinematic : Not applicable Explosive properties : Not classified

Conductivity : This material is not expected to be a static accumulator. Decomposition temperature : Data not available

10.1 Reactivity The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph.10.2 Chemical stability Stable.10.3 Possibility of hazardous reactions

9 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

10.6 Hazardous decomposition products Hazardous decomposition : Hazardous decomposition products are not expected to form products during normal storage.

Basis for assessment : Information given is based on data on the components and the toxicology of similar products.Unless indicated otherwise, the data presented is representative of the product as a whole, rather than for individual component(s). Information on likely routes of : Skin and eye contact are the primary routes of exposure exposure although exposure may occur following accidental ingestion.

Acute toxicity Product: Acute oral toxicity : LD50 rat: > 5.000 mg/kg Remarks: Expected to be of low toxicity:

Acute inhalation toxicity : Remarks: Not considered to be an inhalation hazard under normal conditions of use.

Skin corrosion/irritation Product: Remarks: Expected to be slightly irritating., Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin resulting in disorders such as oil acne/folliculitis.

10 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

Material GHS/CLP Carcinogenicity Classification Alkyl thiadiazole No carcinogenicity classification. Dialkyl thiophosphate ester No carcinogenicity classification.

Product: : Remarks: Not expected to impair fertility., Not expected to be a developmental toxicant.

11 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

Further information Product: Remarks: Used grease may contain harmful impurities that have accumulated during use. The concentration of such harmful impurities will depend on use and they may present risks to health and the environment on disposal., ALL used grease should be handled with caution and skin contact avoided as far as possible.

Basis for assessment : Ecotoxicological data have not been determined specifically for this product. Information given is based on a knowledge of the components and the ecotoxicology of similar products. Unless indicated otherwise, the data presented is representative of the product as a whole, rather than for individual component(s).(LL/EL/IL50 expressed as the nominal amount of product required to prepare aqueous test extract). Product: Toxicity to fish (Acute : Remarks: Expected to be practically non toxic: toxicity) LL/EL/IL50 > 100 mg/l

Toxicity to daphnia and other : Remarks: Expected to be practically non toxic: aquatic invertebrates (Acute LL/EL/IL50 > 100 mg/l toxicity) Toxicity to algae (Acute : Remarks: Expected to be practically non toxic: toxicity) LL/EL/IL50 > 100 mg/l

12 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

toxicity) Toxicity to daphnia and other : Remarks: Data not available aquatic invertebrates (Chronic toxicity) Toxicity to bacteria (Acute : toxicity) Remarks: Data not available

no data available12.3 Bioaccumulative potential Product: Bioaccumulation : Remarks: Contains components with the potential to bioaccumulate.

Partition coefficient: n- : Pow: > 6Remarks: (based on information on similar products) octanol/water12.4 Mobility in soil Product: Mobility : Remarks: Semi-solid under most environmental conditions., If it enters soil, it will adsorb to soil particles and will not be mobile. Remarks: Floats on water.12.5 Results of PBT and vPvB assessmentno data available12.6 Other adverse effects Product: Additional ecological : Product is a mixture of non-volatile components, which are not information expected to be released to air in any significant quantities., Not expected to have ozone depletion potential, photochemical ozone creation potential or global warming potential. Poorly soluble mixture., May cause physical fouling of aquatic organisms.

13 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste classification and disposal methods in compliance with applicable regulations. Do not dispose into the environment, in drains or in water courses

Waste product should not be allowed to contaminate soil or ground water, or be disposed of into the environment. Waste, spills or used product is dangerous waste.

Contaminated packaging : Dispose in accordance with prevailing regulations, preferably to a recognized collector or contractor. The competence of the collector or contractor should be established beforehand. Disposal should be in accordance with applicable regional, national, and local laws and regulations.

Local legislation Remarks : Disposal should be in accordance with applicable regional, national, and local laws and regulations.

14.1 UN number ADR : Not regulated as a dangerous good IMDG : Not regulated as a dangerous good IATA : Not regulated as a dangerous good14.2 Proper shipping name ADR : Not regulated as a dangerous good IMDG : Not regulated as a dangerous good IATA : Not regulated as a dangerous good14.3 Transport hazard class ADR : Not regulated as a dangerous good IMDG : Not regulated as a dangerous good IATA : Not regulated as a dangerous good14.4 Packing group ADR : Not regulated as a dangerous good IMDG : Not regulated as a dangerous good IATA : Not regulated as a dangerous good14.5 Environmental hazards ADR : Not regulated as a dangerous good IMDG : Not regulated as a dangerous good14.6 Special precautions for user Remarks : Special Precautions: Refer to Chapter 7, Handling & Storage, for special precautions which a user needs to be aware of or needs to comply with in connection with transport.

14 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

Pollution category : Not applicable Ship type : Not applicable Product name : Not applicable Special precautions : Not applicable

The components of this product are reported in the following inventories: EINECS : All components listed or polymer exempt. TSCA : All components listed.

Full text of H-Statements H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H412 Harmful to aquatic life with long lasting effects.

Full text of other abbreviations Aquatic Chronic Chronic aquatic toxicity Eye Dam. Serious eye damage Skin Sens. Skin sensitisation Abbreviations and Acronyms : The standard abbreviations and acronyms used in this document can be looked up in reference literature (e.g. scientific dictionaries) and/or websites.

ACGIH = American Conference of Governmental Industrial Hygienists ADR = European Agreement concerning the International Carriage of Dangerous Goods by Road AICS = Australian Inventory of Chemical Substances ASTM = American Society for Testing and Materials BEL = Biological exposure limits BTEX = Benzene, Toluene, Ethylbenzene, Xylenes CAS = Chemical Abstracts Service CEFIC = European Chemical Industry Council CLP = Classification Packaging and Labelling COC = Cleveland Open-Cup DIN = Deutsches Institut fur Normung DMEL = Derived Minimal Effect Level DNEL = Derived No Effect Level DSL = Canada Domestic Substance List

15 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

EC = European Commission EC50 = Effective Concentration fifty ECETOC = European Center on Ecotoxicology and Toxicology Of Chemicals ECHA = European Chemicals Agency EINECS = The European Inventory of Existing Commercial Chemical Substances EL50 = Effective Loading fifty ENCS = Japanese Existing and New Chemical Substances Inventory EWC = European Waste Code GHS = Globally Harmonised System of Classification and Labelling of Chemicals IARC = International Agency for Research on Cancer IATA = International Air Transport Association IC50 = Inhibitory Concentration fifty IL50 = Inhibitory Level fifty IMDG = International Maritime Dangerous Goods INV = Chinese Chemicals Inventory IP346 = Institute of Petroleum test method N° 346 for the determination of polycyclic aromatics DMSO-extractables KECI = Korea Existing Chemicals Inventory LC50 = Lethal Concentration fifty LD50 = Lethal Dose fifty per cent. LL/EL/IL = Lethal Loading/Effective Loading/Inhibitory loading LL50 = Lethal Loading fifty MARPOL = International Convention for the Prevention of Pollution From Ships NOEC/NOEL = No Observed Effect Concentration / No Observed Effect Level OE_HPV = Occupational Exposure - High Production Volume PBT = Persistent, Bioaccumulative and Toxic PICCS = Philippine Inventory of Chemicals and Chemical Substances PNEC = Predicted No Effect Concentration REACH = Registration Evaluation And Authorisation Of Chemicals RID = Regulations Relating to International Carriage of Dangerous Goods by Rail SKIN_DES = Skin Designation STEL = Short term exposure limit TRA = Targeted Risk Assessment TSCA = US Toxic Substances Control Act TWA = Time-Weighted Average vPvB = very Persistent and very Bioaccumulative

Further information Other information : A vertical bar (|) in the left margin indicates an amendment from the previous version.

16 / 17 800010015996 AE SAFETY DATA SHEET Shell Naturelle S2 Wire Rope Lubricant A Print Date 09/01/2017 Revision Date 08/31/2017 Version 1.0

This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product.

17 / 17 800010015996 AE

Lubricants with poor resistance to water wash-off may fail to protect your equipment, which means there is an increased likelihood of additional costs through unplanned maintenance or equipment downtime.

Shell Naturelle S2 Wire Rope Lubricant A is designed for wire ropes, open gears and other deck equipment. It has excellent adhesion properties and is formulated with a selected blend of additives to offer superior extreme-pressure and anticorrosion protection in the most challenging of environments.

Low-cost lubricants can be poor value if they fail to stay where you need them. Shell Naturelle S2 Wire Rope Lubricant A offers high resistance to water wash-off owing to its outstanding adhesion properties. This can help to cut product consumption and labour costs, thereby reducing the cost of keeping your mooring and crane wires protected and working efficiently.

AeroShell Fluid 41 is a mineral oil based aircraft hydraulic oil with excellent low temperature characteristics that is capable of operating over a wide range of temperatures. This Fluids is oxidation inhibited and contains a special antiwear additive...

Shell Naturelle Fluids HF-E is an advanced biodegradable hydraulic Fluids for use in power transmission and hydraulic systems working in environmentally sensitive areas. Synthetic esters and a specially tailored additive system provide Shell Naturelle...

Quintolubric 888-46 was designed to replace anti-wear, mineral oil-based hydraulic Fluids used in applications where fire hazards exist. QUINTOLUBRIC® 888-46 can also be used in environmentally sensitive hydraulic applications without compromising the...

Shell Tellus S2 MX Fluids are high performance Hydraulic Fluids based on Group II base Oil that provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical...

Shell Tellus S2 MX Fluids are high performance Hydraulic Fluids based on Group II base Oil that provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical...

Shell Tellus S2 MX Fluids are high performance Hydraulic Fluids based on Group II base Oil that provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical...

Shell Tellus S2 MX Fluids are high performance Hydraulic Fluids based on Group II base Oil that provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical...

Shell Tellus S2 MX Fluids are high performance Hydraulic Fluids based on Group II base Oil that provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical...

Shell Tellus S2 VX Fluids are high performance Hydraulic Fluids based on Group II base Oil that provide outstanding protection and performance across a wide range of temperatures. They resist breakdown under heat or mechanical stress and are ideally...

KLUBER GRAFLOSCON A-G 1 ULTRA is an easy-to-spread adhesive lubricant based on an aluminium complex soap thickener, mineral oil and a high content of solid lubricant (fine graphite).

The Shell Corena range of air compressor oils has been developed to enable equipment operators to select the oil that will deliver optimum value to their operations through enhanced wear protection, long oil life and high system efficiency.

From mainstream oils for standard life applications to advanced synthetic oils, the Shell Corena range of compressor oils lets you match oil life to your onboard operational needs.

The Shell Morlina range offers a range of bearing and circulating oils, from robust, reliable products to fully synthetic products fortified with extreme-pressure (EP) additives. This includes specialty products that continue to function even when contaminated with water, dust or dirt as well as the fully synthetic Shell Morlina S4 B, which provides the longest oil life under severe conditions in the Shell Morlina range.

Shell Morlina range includes specialty products that continue to function even when contaminated with water, dust or dirt as well as the fully synthetic Shell Morlina S4 B, which provides the longest oil life under severe conditions.

Our Shell Naturelle range of biodegradable lubricants are approved by leading manufacturers for use in applications that have a potential oil-to-sea interface

Shell Naturelle HF-E 46: Synthetic ester based, advanced hydraulic fluid for use in applications requiring vessel general permit (VGP) compliance. Approved for use in major OEMs’ stabilisers and controllable-pitch propellers. Holds ISO 15380 (HEES) and DIN 51524 part 2 and 3. EU Ecolabel registered for VGP 2013 compliance

Shell Naturelle HF-E 68: Synthetic ester based, advanced hydraulic fluid for use in applications requiring VGP compliance. Approved for use in major OEMs’ stabilisers, controllable-pitch propellers and stern tubes. Holds ISO 15380 (HEES) and DIN 51524 part 2 and 3. EU Ecolabel registered for VGP 2013 compliance

Shell Naturelle S4 Gear Fluid 68: Fully saturated ester based gear fluid for use in thrusters and propulsion drives and certain stern tube designs. Superior load-carrying performance while maintaining biodegradability. Complies with the VGP 2013 requirements.

Shell Naturelle S4 Gear Fluid 100: Fully saturated ester based gear fluid for use in thrusters and propulsion drives and certain stern tube and controllable-pitch propeller designs. Superior load-carrying performance while maintaining biodegradability. Complies with the VGP 2013 requirements.

Shell Naturelle S4 Gear Fluid 150: Fully saturated ester based gear fluid for use in thrusters and propulsion drives and certain stern tube designs. Superior load-carrying performance while maintaining biodegradability. EU Ecolabel registered for VGP 2013 compliance

Shell Naturelle S4 Stern Tube Fluid 100: Non-emulsifying fluid made from fully saturated esters. Approved by the major stern tube and seal manufacturers. EU Ecolabel certified guaranteeing VGP compliance. Designed to offer superior lubrication and resistance to hydrolysis. EU Ecolabel registered for VGP 2013 compliance. EU Ecolabel registered for VGP 2013 compliance

Shell Gas Compressor oil is designed to match your technical and operational needs. For your equipment to perform to its design standards, you need a lubricant that stays in place, giving continuous protection and lubrication.

The Shell Omala range of gear oils has been developed to enable marine equipment operators to select the oil that will deliver optimum value to their operations through enhanced wear protection and long oil life.

The Shell Gadus ranges include multipurpose greases that can help to simplify your product inventory, as well as speciality greases, including advanced polyurea synthetic products designed for the most severe extreme-temperature and long-life applications, and a range of open-gear lubricants.

Shell Gadus S2 V220AD 2 : High performance heavy duty grease containing solid lubricants - Shell Gadus S3 High Speed Coupling Grease : Premium gear-coupling grease

Shell Gadus S3 T220 2 : Ultimate performance extreme pressure di-urea grease - Shell Gadus S3 V220C 2 : Top-performance, high-temperature, extreme-pressure multipurpose grease

Shell offers a complete range of lubricating oils for marine engines burning gas, heavy fuel, gas oil or liquid biofuel. All of Shell’s engine oils are designed to minimise deposit build-up and to help keep your engine clean.

Some of our products include Shell Argina, specifically formulated for four-stroke diesel engines, to keep piston under crowns clean, maintaining cooling performance and preventing hot corrosion. For gas engines, Shell Mysella provides superior deposit control, even in engines with high piston temperatures. This maintains excellent ring belt cleanliness and cylinder liner protection. Shell Alexia is a cylinder oil for use in all 2-stroke low-speed diesel engines.

Shell Alexia 100: High-sulphur fuel oil* + scrubber (*0.5% sulphur fuel (If needed for cleanliness)) - Shell Alexia 140 : High-sulphur fuel oil + scrubber

Shell Argina S2 40: Multifunctional crankcase lubricant for highly rated medium-speed diesel engines operating on residual, blended or distillate fuels with Sulphur content < 2.0 %. Recommended for dual fuel conditions.

Shell Argina S3 30 : Multifunctional crankcase lubricant for highly rated medium-speed diesel engines operating on residual fuel with Sulphur content < 3.0%

Shell Argina S3 40: Multifunctional crankcase lubricant for highly rated medium-speed diesel engines operating on residual fuel with Sulphur content < 3.0%

Shell Argina S4 40 : Multifunctional crankcase lubricant for highly rated medium-speed diesel engines operating under high stress conditions and on residual fuel with Sulphur content > 2.0%

Shell Argina S5 40 : Multifunctional crankcase lubricant for highly rated medium-speed diesel engines operating under high stress conditions and on residual fuel with Sulphur content > 3.0%. It has been designed for the latest high output low oil consumption engines.

Shell Gadinia S3 30: High quality, multifunctional diesel engine lubricant designed for the most severe service main propulsion and auxiliary marine trunk piston engines burning distillate, hybrid and bio-fuels with a Sulphur content up to 1%.

Shell Gadinia S3 40: High quality, multifunctional diesel engine lubricant designed for the most severe service main propulsion and auxiliary marine trunk piston engines burning distillate, hybrid and bio-fuels with a Sulphur content up to 1%.

Shell Gadinia AL 30: Advanced lubricant for medium-speed, marine diesel engines operating on distillate fuels and where liner lacquering is a potential problem. Suitable for use in certain gears and some ancillary equipment

Shell Gadinia AL 40: Advanced lubricant for medium-speed, marine diesel engines operating on distillate fuels and where liner lacquering is a potential problem. Suitable for use in certain gears and some ancillary equipment

Shell Mysella S3 N 40 : High-performance engine oil for four-stroke spark-ignition gas engines requiring a low-ash oil to meet the latest emission requirements

Shell Mysella S5 N 40 : Highest performance natural gas engine oil for use in highly-rated spark-ignition 4-stroke engines requiring low ash oil. It is specially developed to provide extended drain oil intervals

The Shell Tellus range of hydraulic fluids provides reliable air release filterability and cleanliness, and the latest technology to help extend pump life even under the most severe conditions.

AeroShell Fluid 41 : Superclean special application mineral fluid - Shell Tellus S2 VX 15 : High-performance hydraulic fluid providing outstanding protection and performance across a wide range of temperatures

Every part of your machine or process has been meticulously engineered, so you need a lubricant that will protect and maintain its efficiency. The Shell Refrigeration Oil range lets you select the oil designed to deliver optimum value to your operation through enhanced equipment protection, and high system efficiency.

Shell’s range of turbine oils has been developed to deliver optimum value to your operation through enhanced protection, long oil life and high system efficiency. From high-temperature gas turbine systems to combined cycle systems with integral gearing, the Shell Turbo range can protect your equipment from corrosion and minimise the build-up of deposits and lacquer in turbine bearings and control valves.

To meet the challenges of a wide range of equipment designs and applications, Shell has designed a portfolio of turbine oils that enables you to choose a product to match your technical and operational needs.

Shell Heat Transfer Oil is a heat transfer fluid for use in indirect closed fluid heat transfer systems with bulk temperatures up to 320°C. Shell Nautilus Premium Outboard is a High-performance lubricant for superior protection of all gasoline outboard 2-stroke motors.

The Kirkpatrick Group, Inc. has been the Original Equipment Manufacturer of Dynagard™ Environmental Lubricants and Wire Rope Lubrication equipment for over 30 years. We developed the first successful Wire Rope Lubrication System

Full Sail Marine maintains offices around the world to offer quick response services to our clients in the Commercial, Government, Cruise and Offshore industries. With locations throughout North America and Europe, we stand ready

Manufacturer of wire rope & cable lubricants including grease. Specifications of wire rope & cable grease include pour point of minus 25 degrees F, flash point of 120 degrees F, viscosity of 3.28 at 100 degrees F & 12.8 at 40 degrees F, & specific gravity of 0.89. Wire rope & cable grease capacities include ability to penetrate wire rope, evaporate & leave a film of molybdenum disulphide in the core to lubricate each wire strand. Wire rope & cable grease can be applied by spraying, brushing or dipping in a in-line tank with no heating requirements. Grease is available in 25 lb. pail or 55 gal. drums. Compliant with ASTM standards.

This product is a semi-fluid wire rope lubricant designed to meet the lubrication and corrosion prevention requirements of wire ropes working under all conditions. Typical application areas are dockside and ship crane ropes, drag lines, hoists and mobile cranes.

Wire Rope Lube will penetrate between the rope strands to provide integral lubrication and to provide both internal and external protection against corrosion caused by wet, adverse weather conditions and sea water.

Crosby’s Vitalife®products are the preferred wire rope lubricants in the industry because of their ability to penetrate into wire rope and displace water and contaminants, thus reducing wear and corrosion throughout the rope.Available in a variety of container sizes.

Whitmore’s Wire Rope Lubricant products also coat these strands to prevent friction and wear. This results in longer wire rope life, less downtime for rope changes and more production.

Whitmore’s Wire Rope Lubricant is easily pumpable at temperatures down to -25°F (-35°C). Its nondrying film remains flexible in the most extreme weather conditions, which eliminates flaking and peeling.Whitmore’s Wire Rope Lubricant can be used to lubricate all sizes of wire rope, as well as chains, leaf springs and other applications where penetrating oil is needed. It may be applied by hand or automatic lube system.

LUBEGARD Wire Rope Lubricant is patented, aquatically non-toxic & biodegradable. It contains a unique blend of corrosion inhibitors, thickeners and wear reducers. Ideal for all types of wire ropes and chains in a variety of services and environments. Wire Rope Lubricant is biodegradable, non-toxic, and leave no oil slick! Biodegradable (EPA Shake Flask Test, EPA 560/6-82-003 with unacclimated inoculum) / Aquatically non-toxic (EPA 600/4-90-027, Rainbow trout test). Forms liquid protective layer, does not foul automatic applicators, Excellent for manual application, Water and salt water resistant. Can be applied in many ways; spray, wipe, dip or brush it on. It can also be applied with various low viscosity core lubricators. Apply as necessary for lubrication and corrosion protection.

VGP Compliant - Shell Naturelle S2 Wire Rope Lubricant A is an Environmentally Acceptable Lubricant under the definitions of the USA EPA 2013 Vessel General Permit.

Low toxicity towards the environment - Made from >60% renewable raw materials. Shell Naturelle S2 Wire Rope Lubricant A is also classed as minimally toxic and non-bioaccumulative.

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal aga