spacemaster sx wire rope hoist supplier

We are committed to helping you rise above the challenges of your everyday business. The safety, reliability and reduced maintenance of the Spacemaster® SX wire rope hoist allows you to get the most out of your equipment. As a standard feature, this hoist includes hoist monitoring to provide real-time data about hoist operation.

Designed to maximize dimensional envelope and operational efficiency, the wide capacity range of this hoist is ideal for applications across industries. The Spacemaster SX wire rope hoist can be configured to your precise facility needs, from building headroom and workflow needs to environmental considerations.

Our innovative hoist design provides the best headroom in the industry while minimizing hook drift and maximizing end approaches. This means you get more floor coverage and easier operation of the equipment. Standard inverter controls on the trolley reduce load swing and minimize brake wear.

R&M offers load monitoring systems as standard with every wire rope hoist. The HoistMonitor and HoistWatch systems give you real information about your equipment use and service needs while preventing overloads to the crane. In addition, our regenerative braking system can ensure safe operation for your crane operators.

At R&M, all our equipment is designed in-house, specifically for lifting applications. The innovative gear case design reduces stress on drum bearings, lowering the need for maintenance and extending the life of the equipment. Our unique rope drum design, with 40:1 drum to rope diameter and motor inside the drum, provides the least hook drift in the industry while improving motor cooling efficiency.

Our RX Program has a selection of wire rope hoists ranging from 1 to 40 tons, available in 2-5 business days! Ask a R&M Distributor for more information on this program.

Have an upcoming project? Use our Crane Designer for an instant recommendation of crane and hoist components that will help you rise above your competition.

The R&M Spacemaster® SX design utilizes a large drum diameter ensure the lowest headrooms and best wheel loads in the industry. The single reeved hoist provides near true vertical lift with only 1/8" of drift per foot of lift making load positioning accurate and easy. The reduce trolley frame allows exceptional hook approaches. The SX features low maintenance, sealed brakes, a two-speed hoist motor, and trolley inverter control.

Hoist and trolley motors: The standard hoist is two-speed with a 6:1 ratio. The motors are designed specifically for hoisting applications, offers high starting torque and ensures precise and reliable load handling. This motor is class F insulated. It is rated for use 30 minute out of an hour giving it a 60% effective duty. The trolley motor"s standard VFD control offers two-step or infinitely variable control for smooth acceleration and deceleration, minimal load swing; fast, and precise load placement.

The Spacemaster® SX Electric Wire Rope Hoists from R&M Materials Handling represents a revolutionary new generation of exceptionally reliable electric wire rope hoists, featuring advanced technology and cutting-edge performance.

An innovative design that includes a large drum diameter gives Spacemaster® SX hoists the lowest headrooms and best wheel loads in the industry while providing near true vertical lift with single reeved hoists, and both exceptional hook approaches and heights of lift.

Standard electric wire rope hoist configurations include normal headroom, low headroom and double girder trolley designs. Hoists in short ton ratings (ASME) or metric ratings (FEM) meet a wide variety of application requirements:

The R&M Spacemaster® SX hoist is a reliable electric wire rope hoists with an innovative design. It has a large drum diameter, giving this R&M hoist the lowest headroom and best wheel loads in the industry while providing near true vertical lift for a single reeved hoist.

What does a larger hoist drum do for you? A drum/rope diameter ratio of approximately 40:1 minimizes rope flex, reducing wear and extending rope life. The Spacemaster® hoist drum"s large diameter contributes to a reduction in frame size and weight. Also, the placement of the electric rope hoist motor inside the drum allows airflow through the drum for optimal motor cooling.

The larger drum diameter provides near true vertical lift with only 1/8 inch drift per foot of lift. The Spacemaster® hoist"s larger drum provides consistent smooth movement and better vertical positioning. This R&M hoist design also means a shorter frame length, allowing closer end approaches.

4-position hoist limit switch includes an innovative phase mismatch protection circuit that prevents the block from running up and damaging the R&M hoist in the event of phase reversal.

Hardened ground gears, thermal motor protection, exceptional rope life and ergonomic hook block design with sturdy safety latch contribute to the hoist"s safe operation and increased reliability.

The R&M Spacemaster SX wire rope hoist represents a revolutionary new generation of exceptionally reliable electric wire rope hoists, featuring advanced technology and cutting-edge performance. An innovative design that includes a large drum diameter gives R&M Spacemaster SX hoists the lowest headrooms and best wheel loads in the industry while providing near true vertical lift with single reeved hoists, and both exceptional hook approaches and heights of lift.

The R&M Spacemaster SX wire rope hoist represents a revolutionary new generation of exceptionally reliable electric wire rope hoists, featuring advanced technology and cutting-edge performance. An innovative design that includes a large drum diameter gives R&M Spacemaster SX hoists the lowest headrooms and best wheel loads in the industry while providing near true vertical lift with single reeved hoists, and both exceptional hook approaches and heights of lift.

Unique R&M wire rope hoist features include new low maintenance, sealed brakes, a two-speed hoist motor, and trolley inverter control. The standard hoist nameplate will carry a CSA c/us rating as well as a NEMA 3R rating for electrical enclosures. Two-component epoxy paint is standard. R&M Spacemaster SX hoists are designed to meet and exceed either ASME H3 or ASME H4 duty (FEM 1Am, 2m, or 3m) ratings and provide the ultimate in easy load handling, safe operation and lasting, trouble-free performance.

Large-diameter hoist drum means easy positioning, closer approaches. The larger drum diameter provides near true vertical lift with a single reeved hoist — only 1/8″ drift per foot of lift. The result is exceptionally smooth movement and fast load positioning. This innovative design also means a shorter frame length, allowing closer end approaches.

Hoist and trolley motors designed for space savings and productivity. Standard two-speed hoist motor (6:1 ratio), designed specifically for hoisting applications, offers high starting torque and ensures precise and reliable load handling. The hoist motor is class F insulated, 30 minute rated (60% effective duty), thermally protected and totally enclosed. The trolley motor’s standard inverter control offers two-speed multi-step or infinitely variable speed control for smooth acceleration and deceleration,

An electromechanical load limit switch prevents the lifting of loads that are in excess of 110% of rated capacity. The 4-position hoist limit switch includes an innovative phase mismatch protection circuit that prevents the block from running up and damaging the hoist in the event of phase reversal.

Sealed brakes, hardened ground gears, thermal motor protection, exceptional rope life and ergonomic hook block design with sturdy safety latch contribute to the hoist’s safe operation and increased reliability.

Sealed brakes mean long-term value. Sealed dust-proof brakes on the trolley and hoist motors require little adjustment for over a million cycles and will last the life of the hoist under normal use.

Trolley design reduces wear on components. The trolley drive is totally enclosed, grease lubricated and is designed to be maintenance-free. Trolley wheel bearings are permanently lubricated. The automatic disc brake and inverter control help extend the life of the motor and other components, which means less maintenance, less downtime, lower repair costs — and reduced cost over the lifetime of your hoist equipment.

The innovative gear case design reduces stress on drum bearings, reducing the need for maintenance while extending component life. It features hardened and ground internal reduction gears driving an external drum gear located on the inner surface of the rope drum. The gearbox’s semi-fluid grease lubrication also helps to extend its working life. The gear case is designed to run cooler and more efficiently than those equipped with a mechanical load brake.

A drum/rope diameter ratio of approximately 40:1 minimizes rope flex, reducing wear and extending rope life. The drum’s large diameter also contributes to a reduction in frame size and weight, reducing wear on hoist components and enabling the use of more cost-effective crane girders. The unique placement of the hoist motor inside the drum provides directed airflow through the drum for optimal motor cooling. This design also makes the motor and brake more easily accessible.

Heavy-duty lifting requires heavy-duty solutions. When you need a rugged hoist with high capacities and long lifts, the SXL open winch wire rope hoist is there to meet the most rigorous lifting demands.

The SXL open winch hoist is tailored to meet your specific requirements. The modular design of the hoists and trolleys allow a wide variety of application-specific designs, with all the functionality of a custom built-up hoist. Choose from an abundance of special features, such as outdoor protection and special temperature ranges, specialty hooks and provisions for below the hook devices, precision load and sway controls, maintenance platforms, extra long lifts, and extra durable hardened hoist drum and sheaves.

The SXL open winch wire rope hoist is designed for strength and reliability, and engineered in-house specifically for heavy lifting applications. With operations this critical, nothing is more important than safety, reliability, and precision.

All SXL open winch wire rope hoists come equipped with the HoistMonitor® load monitoring system to control overloads and provide vital safety and performance data about the equipment. SXL hoists also include key safety features such as rope overwrap protection as standard. Additional features such as micro speeds and inching give the operator precise control of the load and increasing safety.

The SXL’s rugged design starts at its core. All SXL winches are equipped with D.C. disk brakes for all motions, Class H insulation on the motors, and three-step helical gearing. This machinery is designed specifically for hoisting operations, meaning you are getting the most out of your equipment. The SXL open winch hoist’s unique rope drum design features a flexible two-stage geared coupling for dynamic bending and movement of the drum, reducing fatigue on the coupling.

SXL open winch hoists come standard with closed-loop vector controls, providing the most precise lifting experience available. Specialty controls also maximize the effectiveness of the equipment in your operations. Some of these features are load floating, anti-sway controls, hoisting synchronization, and extended speed ranges. Our controls packages are customizable to suit a wide variety of special applications.

R&M"s Spacemaster SX wire rope hoist features a large drum diameter that creates near true vertical lift, and its frame design allows closer end approaches than other hoists on the market. Standard electric wire rope hoist configurations include normal headroom, low headroom and double girder designs.

The Spacemaster® SXs" unique hoist features include new low maintenance, sealed brakes, a two-speed hoist motor, and trolley inverter control. The standard hoist nameplate will carry a CSA c/us rating as well as a NEMA 3R rating for electrical enclosures. Two-component epoxy paint is standard. Spacemaster® SX hoists are designed to meet and exceed either ASME H3 or ASME H4 duty (FEM 1Am, 2m, or 3m) ratings and provide the ultimate in easy load handling, safe operation and lasting, trouble-free performance.

Large-diameter hoist drum means easy positioning, closer approaches. The larger drum diameter provides near true vertical lift with a single-reeved hoist—only 1/8″ drift per foot of lift. The result is exceptionally smooth movement and fast load positioning. This innovative design also means a shorter frame length, allowing closer end approaches. Hoist and trolley motors designed for space savings and productivity. Standard two-speed hoist motor (6:1 ratio), designed specifically for hoisting applications, offers high-starting torque and ensures precise and reliable load handling.

Standard safety features that competitors don’t offer—or offer at extra cost. An electromechanical load limit switch prevents the lifting of loads that are in excess of 110% of rated capacity. The 4-position hoist limit switch includes an innovative phase mismatch protection circuit that prevents the block from running up and damaging the hoist in the event of phase reversal.

Sealed brakes, hardened ground gears, thermal motor protection, exceptional rope life and ergonomic hook block design with sturdy safety latch contribute to the hoist’s safe operation and increased reliability.

Sealed brakes mean long-term value. Sealed dust-proof brakes on the trolley and hoist motors require little adjustment for over a million cycles, and will last the life of the hoist under normal use.

Trolley design reduces wear on components. The trolley drive is totally enclosed, grease lubricated and designed to be maintenance-free. Trolley wheel bearings are permanently lubricated. The automatic disc brake and inverter control help extend the life of the motor and other components, which means less maintenance, less downtime, lower repair costs—and reduced cost over the lifetime of your hoist equipment.

Innovative gearbox provides dependable operation and extends equipment life. The innovative gear case design reduces stress on drum bearings, reducing the need for maintenance, while extending component life. It features hardened and ground internal reduction gears driving an external drum gear located on the inner surface of the rope drum. The gearbox’s semi-fluid grease lubrication also helps to extend its working life. The gear case is designed to run cooler and more efficiently than those equipped with a mechanical load brake.

Larger hoist drum minimizes rope wear and enhances cooling. A drum / rope diameter ratio of approximately 40:1 minimizes rope flex, reducing wear and extending rope life. The drum’s large diameter also contributes to a reduction in frame size and weight, reducing wear on hoist components and enabling the use of more cost-effective crane girders. The unique placement of the hoist motor inside the drum provides directed airflow through the drum for optimal motor cooling. This design also makes the motor and brake more easily accessible.