ss wire rope strength price

Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Stainless steel wire rope, sometimes called corrosion resistant, is generally used in applications that may degrade a bright wire or galvanized wire rope. The 6x19 Class wire rope is the most common class due to its good combination of flexibility and resistance to wear-and-tear. This diversity makes this wire rope suited for many different kinds of machinery or equipment. We also carry coils of wire rope in 2500" and 5000" lengths. Quantity ordered will be in a continuous roll. Specific lengths can be ordered for additional charges. Please call our sales team for pricing and availability. Check our Rigging Supplies and Marine Hardware category for a full line of rigging equipment such as shackles, wire rope, wire rope clips, etc.

Stainless steel wire rope, sometimes called corrosion resistant, is generally used in applications that may degrade a bright wire or galvanized wire r...

Stainless steel wire rope, sometimes called corrosion resistant, is generally used in applications that may degrade a bright wire or galvanized wire rope. The 6x19 Class wire rope is the most common class due to its good combination of flexibility and resistance to wear-and-tear. This diversity makes this wire rope suited for many different kinds of machinery or equipment. We also carry coils of wire rope in 2500" and 5000" lengths. Quantity ordered will be in a continuous roll. Specific lengths can be ordered for additional charges. Please call our sales team for pricing and availability. Check our Rigging Supplies and Marine Hardware category for a full line of rigging equipment such as shackles, wire rope, wire rope clips, etc.

1/2" wire rope is a solid choice for many rigging applications. With break strengths ranging between 10.3 tons (26,600 lbs.) and 14.6 tons (29,200 lbs.), this diameter of rope can be counted on to provide the high level of performance you require.

The standard finish has a lubricant coating to reduce friction and provide some protection from corrosion. The galvanized and stainless steel finishes provide additional corrosion-resistance.

The spin-resistant rope has an innovative design to help keep the cable from rotating while under a load. The inner strands are spun in the opposite direction as the outer strands.

US Cargo Control offers a full line of rigging supplies so you can find the perfect solution. Our selection includes additional wire rope options (ranging in diameter from 1/8" to 2-1/2"), guy wire, wire rope fittings, and general rigging hardware.

High-quality, durable product. I purchased this cable to use in a Warn 2500 lbs Winch on my Honda Foreman 500TRX. I was getting tired of replacing rusted fraying cables and wanted to go to stainless steel. I use my winch for both work and play. I tested this stainless cable pulling my machine out of mud holes as well as pulling trees and logs out of the bush to cut for firewood. So far it has exceeded my expectations. At 250 feet per roll, I can get 4-5 winch rope replacements at a fraction of the OEM cost.PROTIP: When cutting stainless cable use a grinder and a zipdisk to make a clean cut; using a shear or cable clipper will make an unnecessary mess and crush the strands.

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller"s listing for full details.See all condition definitionsopens in a new window or tab

Brand new: Lowest priceThe lowest-priced brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag.See details for additional description.

Item model number ‏ : ‎ 328ft wire rope. 【Multipurpose】- The 328ft stainless steel cable is not easily entangled and is customized cut to the required length. Perfect for indoor-outdoor purposes, such as chandeliers, clotheslines, lightning cables between trees, garden lines, fishing lines, railing, boats, DIY light strings in your backyard, etc.

Type 304 stainless steel is the standard alloy for use in wire rope and cable. It has about the same strength as galvanized wire rope or cable but is much more corrosion resistant. It can be used in most industrial atmospheres and has acceptable corrosion resistance when used in marine and salt water.

316 grade stainless steel is the standard high-corrosion-resistant steel for wire rope and cable. It is resistant to many chemicals in the pulp and paper, photographic, food processing, and textile industries. Type 316 stainless steel wire rope has the best pitting resistance in marine and salt water, and can be used in temperatures up to 900 degrees Fahrenheit.

The vast majority of wire rope specifications are designated with 316 or 304 (and sometimes 302 grade). The basic difference is in the elements that comprise the alloy itself—and 316 stainless wire rope is known to be more corrosion-resistant than 304.

Commonly used in aircraft controls, sailboat rigging, winches, and garage doors, a 7x19 stainless steel wire rope is made up of seven strands with 19 wires in each strand—approximately twice as flexible as a 7x7 construction. Also available in USA-made.

Our stainless-steel aircraft cable consists of thin steel wires that are stranded together to give the cable a combination of flexibility and strength. Although the largest diameter of aircraft cable available at Tyler Madison maxes out at a ¼”, it is lightweight and strong enough to meet special airline safety standards.

Commercial quality "aircraft grade" cable is made from galvanized steel wire or stainless steel wire. Galvanized aircraft cable provides high tensile strength and adequate corrosion resistance for most commercial applications. Stainless steel cable provides slightly lower tensile strength, but greater resistance to corrosion. We also offer aircraft cable fitting services.

Cable or wire rope is fabricated from individual wires put together in a uniform helical arrangement to form what is called a strand. A strand typically contains 7 wires (1 x 7) or 19 wires (1 x 19), although others are available. Cable or wire rope contains a varying number of these strands such as 7 x 7 and 7 x 19 (number of strands x wire per strand). The more strands and more wires per strand, the more flexible the cable and the higher the cost. The greater the cable diameter, the greater the diameter of each wire and the greater the breaking strength.

Airplane cable is used for more than just aircraft applications. It’s strength and flexibility make aircraft braided steel cable perfect for numerous commercial and industrial uses. Stainless steel aircraft cable is typically used in areas where the components are exposed to oxidative chemicals such as salt, and the ability to resist corrosion is crucial. Galvanized aircraft cable is a more affordable solution, but it does not resist corrosion as well.

At Tyler Madison Inc., aircraft cable assemblies are just one of the many quality wire rope products that we manufacture for our industrial and commercial customers . We have the ability to create fully customized cable assemblies with standard or custom aircraft cable fittings. With skilled labor and precise advanced equipment, we are able to manufacture quality aircraft wire ropes and high-strength cables at an affordable price. Along the way, we can help you design and engineer aircraft cable fittings for your application. If you have an idea of what kind of aviation cable assembly or wire rope you need, but aren"t sure how to make it a reality, just contact Tyler Madison today and we will be ready to help!

We are committed to providing our customers maximum value when they choose to do business with us, whether it"s custom aircraft cables, metal cables or standard braided steel cable. That’s why we go above and beyond with our customer service and offer value-added services to ensure the quality of our products and the satisfaction of our customers. These services include:Design Assistance

No matter how customized the cable, wire rope or aircraft cable fittings for your application needs to be, we are more than capable of helping you get the job done!

For more information or inquiries about our wire rope or aircraft cable fittings, get in touch with us today. Our team of experts are here to answer any of your questions. We look forward to hearing from you!

As specialist for manufacturing quality steel wire ropes over 20 years, our company can supply strong, durable and reliable ropes that capable to minimize your downtime and maximize cost effectiveness. Decades of experience we owned make us know clearly the work you do and capable to provide professional guidance.

We select the best steel or stainless steel as raw material for wire rope manufacturing. Our products are manufactured under strict quality managements and test before they leave the factory.

Our engineers can provide professional advice about picking up optimal steel wire ropes for their application, installation guidance to ensure maximum return in their wire rope system.

If you are going to pick up steel wire ropes that suit your project perfectly, you must have an ideal about the construction about them. Our company can supply bright wire rope, galvanized wire rope, stainless steel wire rope, compacted wire rope, rotation resistant wire ropes, mining wire rope, elevator wire rope, crane wire rope and gas & oilfield wire ropes. Here are some details to solve the problem that may puzzle you whether you are browsing the web or picking up steel wire ropes.

Bright steel wire ropes mean no surface treatment is applied to the rope. Therefore, they have the lower price among these three wire ropes. Generally, they are fully lubricated to protect the rope from rust and corrosion.

Galvanized steel wire ropes feature compressed zinc coating for providing excellent corrosion resistance. With higher break strength yet lower price than stainless steel, galvanized steel wire ropes are widely used in general engineering applications such as winches and security ropes.

Stainless steel wire ropes, made of quality 304, 305, 316 steels, are the most corrosive type for marine environments and other places subjected to salt water spray. Meanwhile, bright and shiny appearance can be maintained for years rather than dull as galvanized steel wire ropes.

Steel wire ropes are composed of multiple strands of individual wires that surrounding a wire or fiber center to form a combination with excellent fatigue and abrasion resistance. These wires and strands are wound in different directions to from different lay types as follows:

Beside above lay types, alternative lay ropes which combine regular lay and lang lay together and ideal for boom hoist and winch lines, can also be supplied as your request.

Two main methods about seizing steel wire ropes in conjunction with soft or annealing wire or strands to protect cut ends of the ropes form loosening.