sta lok wire rope terminal in stock

Over 48 years since its inception, Sta-Lok self-fit terminals are used around the world and have gained worldwide recognition for high quality and reliability.

The Sta-Lok self-fit terminal will work under constant loading and variable shock loading. The termination is stronger than the rated breaking load of the wire rope. In all situations, the Sta-Lok terminal has proven to be totally reliable and re-usable*.

It was an absolute pleasure dealing with James at Sta-Lok, he offered multiple solutions that were sensibly priced, delivery was much quicker than I expected and the quality couldn’t be beaten. I will certainly use these guys again. The system that we used was chosen for its simplicity, I didn’t want a massive turnbuckle and Sta-Lok had a solution

With more than 48 years of supplying the global marine industry, we offer an extensive range of stainless steel marine fittings, turnbuckles, and terminals for Marine wire rope rigging. Sta-Lok is the preferred choice for professionals and sailboat owners.

The Sta-Lok system has proven itself to be the simplest to assemble and most efficient method of terminating wire ropes. The Sta-Lok terminal will work under constant loading and variable shock loading. In all situations the Sta-Lok terminal has proven to be totally reliable.

The Sta-Lok terminals can be fitted on site using very simple hand tools. Exact length accuracy can be achieved without the need for pre-measurement or tedious calculation.

Sta-Lok terminals were designed and launched as an innovative mechanical method of terminating wire in 1973 and over the intervening decades they have gained world-wide renown for their ergonomic design, superb quality and ultimate reliability.

Sta-Lok DIY self-fit mechanical terminals are designed for 1×19, 7×19, 7×7 and compacted strand stainless steel wire rope from 3mm up to 26mm diameter.

Sta-Lok terminals are widely recognised as an essential rigging accessory for both the amateur and professional rigger. The Sta-Lok mechanical construction will withstand both constant and variable shock loading with a connection to the wire that is ultimately stronger than the rated breaking load of the wire rope. The simplicity of the Sta-Lok self-fit wire termination concept makes it reusable time and again N.B. a new wedge will be required.

Fisheries Supply is proud to offer Sta-Lok fittings – some of the best rigging hardware available. We stock a variety of Sta-Lok products – including wedges, formers, forks, studs, eyes and backstay insulators. You can trust your standing rigging to Sta-Lok swageless terminals – so shop Fisheries Supply today!

Sta-Lok terminals, turnbuckles and insulators are of the highest quality rigging hardware. Whether you want it hand-fitted or a machine swaged, it"s up to you. All Sta-Lok rigging products are produced in the United Kingdom.

Do it yourself rigging! These Sta-Lok Self Fit terminals are the alternative to swaging. You only need basic hand tools. These terminals are quick and easy to install. The Sta-Lok swageless stemballs, studs, eyes and forks are guaranteed stronger than wire rope. Great for repairing stays and shrouds when a rigger is not around. For blue water cruisers, we advise to take a set of spare Sta-Lok swageless terminals on board. The terminals are ready to use for 1x19 wire rope as standard. If you have 7 strand or compact wire rope, use the different wedges provided. Order your 1x19 stainless steel wire rope per metre from our webstore. The swageless terminals come with split pins. They are suitable for right hand and left hand wire rope.

Swaging terminals are more economic, thinner and aesthetic from the self-fit ones. There is maybe only one small minor point, being that you need a swaging machine to connect the terminals to the wire rope. Luckily, we have such machines and we are happy to do this for you! Premiumropes has precise swaging machines. Measure your old stays to the millimetre and we will make exact new copies. Our on-line rigging configurator guides you through the ordering process. First choose the type and diameter of the stainless steel wire rope you need. The configurator then offers the possible terminals, fittings and rigging screws available for that type of wire rope. The Sta-Lok swage terminals are also loaded in this rigging configurator. If you need help or advice, do not hesitate to contact us or phone at +31 20 419 6412.

Sta-Lok bronze turnbuckles are our favourite. We love the highly polished chromium layer on the outside. The inside of these turnbuckles is forged from high strength bronze alloy. The bronze house prevents a so-called cold fusion with the stainless steel wire rope. Also for the bronze turnbuckles, you can buy your new shrouds or stays with our on-line rigging configurator. Check out the B24 Toggle & Swage bronze turnbuckle. The toggle minimises the fatigue risk.

Want to use your standing rigging as radio antenna? Choose one of our Sta-Lok insulators. Also for the insulators, we have self-fit insulators or ones that require professional swaging. The electronical properties of Sta-Lok insulators are:

Sailing Services has over 47 years of rigging experience specializing in fabricating high quality standing rigging and selling components to riggers and sailors across the globe. Sta-Lok is a premier manufacture of marine rigging offering reliable, quality wire rope hardware for sailboats and architectural rigging. With more than 40 years in the marine industry Sta-Lok offers an extensive range of products for wire rope rigging.

Sta-Lok mechanical fittings are hand fitted rather than machine swaged and can be fitted on site using simple hand tools. The Sta-Lok terminal works under constant loading and variable shock loading, making it stronger than the wire rope fitted for the terminal. All Sta-Lok Terminals are reusable, manufactured from Type 316 stainless steel, and have a long life span.

Please note that mechanical terminals should be installed by experienced persons familiar with Sta-Lok"s assembly instructions. Sailing Services supports educated do-it-yourself sailors if you are confident and understand the rigging process. Many of our do-it-yourself customers, with continuous rigs, order their rigging with a swaged terminal at the top of the mast and a Sta-Lok mechanical fitting for the bottom so they can fit the rigging on site. Sailing Services offers swaging services for marine and architectural applications, please contact us for a quote.

The Sta-Lok wire terminal system for stainless steel wire rope is a simple, hand-fitted, mechanical method that has proven itself to be the most efficient way of terminating wire ropes. The terminal consists of an assembly of four components, which can be fitted on site using very simple hand tools. The Sta-Lok terminal is stronger than the wire rope. It will work under constant load and variable shock loading. In all situations, the Sta-Lok terminal has proven totally reliable.

3. International shipments may be subject to import taxes, customs duties, and/or fees imposed by the destination country. These charges will typically be due once the shipped goods arrive at the country of destination. In addition, any shipping rates listed from outside the Contiguous United States on the Cable Loft website may not be entirely accurate and can be subject to an additional fee before the order can be shipped.

Take look at our wide range of A4 grade stainless swageless wire rope fittings from market leading manufacturer Sta-Lock. These wire rope terminals are completely swageless and can be fitted on site using very simple hand tools. They will work under constant loading and variable shock loading, and in most cases these terminals are stronger than the wire rope they are designed to be used with.;

We offer a range of fittings including eye and fork rigging terminals, guard rail adjusters and jaw rigging screws. They will fit a range of wire rope diameters from 3mm - 5mm, though are listed are for use with 1x19 strand wire rope only. All our fittings come with instructions included.

With over 40 years experience in design, manufacture and distribution to the global marine market, Sta-Lok has the expertise, products and services to meet your rigging requirements – from wire rope fittings and rigging hardware through hand tools and swaging machines.

Sta-Lok offer an extensive range of stainless steel turnbuckles to suit every application. The Supajust turnbuckle incorporates unique design features, style and high performance which sets it apart.

We stock a range of stainless steel wire rope to suit all applications. Manufactured from high quality 316 stainless steel grade 1.4401.We can supply this wire on 100 and 200 metre reels. We hold a large stock of 1×19 for sizes … Continued

Sta-Lok bronze turnbuckles were introduced in 1990 and quickly became recognised as the best in the world. Forged from high tensile bronze alloy and chromium plated to give a highly polished finish, bronze turnbuckles are some of the strongest most … Continued

Available in a wide range of styles to suit most applications Sta-Lok offer a wide range of swage terminals to suit most applications and are suitable for all types of swaging machines. Manufactured from high specification 316 stainless steel grade … Continued

THE SELF ASSEMBLY, SWAGELESS FITTING In 1973 Sta-Lok introduced a new design of wire rope terminal, which simplified the termination of wire rope that it became essential equipment for the end user and professional rigger. Independent testing confirms that Sta-Lok … Continued