stahl wire rope hoist supplier

STAHL Crane Systems wire rope hoists range in capacity from 500 kg to 160,000 kg. STAHL wire rope hoists have a compact, sturdy construction which is extremely low-maintenance. The reliability, power and long service life of Stahl hoists are above average. The particularly smooth, precise starting and braking characteristics are common to all. Tri-State Overhead Crane is your go-to Stahl hoist parts distributor.

The STAHL CraneSystems AS7 wire rope hoist is an innovative choice in lifting and crane technology. The low-maintenance components and modular system are appreciated by users, crane and system manufacturers.

The STAHL SH wire rope crane hoist has been the standard in lifting and crane technology around the world for years. The modular system allows for practically unlimited combinations to meet any of your lifting needs.

TSOC sells, services and provides parts for STAHL wire rope crane hoists; serving clients from coast to coast, Canada, Mexico and especially focused in Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

If you thought the SH series was great just wait until you read about the AS7 hoist as it comes with standard lifting option up to 125 tonnes in capacity. If you’re looking for wire rope electric hoist manufacturers who design powerful lifting equipment for compact spaces then you’ve come to the right place. This hoist can be foot mounted or fixed to a motorized trolley and is suitable for double girder top running overhead cranes. It"s built with a powerful motor and braking assembly for both strength and safety.

MANUAL RELEASE OF HOIST BRAKE:The brake release device permits the hoist brake to be released manually and thus the load to be lowered during a power cut. As an option, every hoist can be equipped with this supplementary equipment to the standard brake.

ROPE DRUM BRAKE:Redundant brake system provides increased safety. Intercept and holding brake, prevents the load falling even if the gear should break. Control is effected with a centrifugal switch or safety PLC.

FREQUENCY INVERTERS FOR “LIFTING”:Smooth starting and braking characteristics. Load swing greatly reduced. Fast, precise positioning of the load, corrective switching operations rarely necessary. The reduced dynamic load means a longer service life for hoist motor and gear and reduces stress on the whole system.. ESR function (Extended Speed Range) for higher hoisting speeds with partial load. Worldwide approvals for all frequency inverters. Certified in compliance with DIN ISO 9001.

TWIN DRIVE CONCEPT:Prevents sagging of the load even when the gearbox fails. Permanent brake, drive and load monitoring. Two synchronously controlled hoist motors and brakes. Two manually releasable brakes for emergency lowering. Robust, completely encapsulated system. Service and safety brake of identical design. Up to 60 % higher load capacities when transporting non-molten metals.

LOAD DISPLAY:SLD four-digit 7-segment load display (Stahl Load Display), large format, luminous red, available with various interfaces including CAN. Choice of 60, 100 or 150 mm digit height. No additional sensor is required as the standard load sensor is used.

SMC MULTICONTROLLER:Continuous load monitoring by overload cut-off even if hoist is at a standstill. Overload protection with ALC automatic load control. Load spectrum memory for load-related operating time summation. Monitoring of the motor temperature of the hoist motor and travel motor. Operating data registration, e.g. operating hours, load spectrum, motor switching operations and load cycles. Data exchange with PC possible.

EMERGENCY HOIST LIMIT SWITCH:In standard version, the hoist is equipped with a gear limit switch for top and bottom hook position and an operational limit switch for top hook position. As an option, up to eight switching elements can be fitted to the switch. This permits for example further stopping positions and operational limiting in bottom hook position.

Carl Stahl Craftsman Wire Rope Hoists are designed for reliability, performance and high degree of operating safety. We offer complete lifting solution for SWL from 3000 kgs to 50,000 kgs. Durable construction, economical cost and low maintenance sets Carl Stahl Craftsman hoists apart from the competition. As it is the output of German technology with Indian manufacturing skill which assures cost effective production at the highest quality level. The Sturdy construction and low maintenance concept are added features of our Wire Rope Hoists.

The STAHL CraneSystems brand stands for reliable and safe hoists and crane components as well as methodical engineering solutions. The products are used in standard, special and explosion-protected bridge cranes or hoisting systems in industries such as automotive, oil and gas, power station construction, chemical industry, transport and logistics, steel and concrete industry, food industry, mechanical and plant engineering, air and road transport industry as well as in the pharmaceutical and food industry. STAHL CraneSystems is a globally recognized brand for explosion-protected crane technology and comprises one of the most extensive, seamless product portfolios. Customers include crane builders, machine/plant manufacturers as well as planning and general contractors all over the world.

With higher loads the hoisting speed is adapted to the actual load on the hook. The SHA uses less power due to the lower output, reducing stress on the power supply and conserving valuable resources.

The SHA comes into its own in production environments where lower loads are lifted frequently, however a higher lifting capacity is required for occasional applications. A flexible range of applications and an excellent price-performance ratio make the SHA wire rope hoist an attractive alternative to the SH series of wire rope hoists.

The SH wire rope hoist programme has been the embodiment of perfection in lifting and crane technology all over the world for many years. Compact, high-performing and particularly maintenance-friendly. Users, crane manufacturers and system manufacturers appreciate the modular system based on field-proven, low-maintenance components. Series manufacture of the standard components means economic advantages for you. And this combined with precise manufacture of off-standard components makes the SH wire rope hoist a widely acknowledged top quality product.

The modular system permits practically unlimited combinations of the sub-assemblies to produce your individual solutions. The SH series from STAHL CraneSystems is available for the load capacity range from 500 kg to 25,000 kg in five frame sizes with 26 load capacity variants. The wire rope hoists can be used as stationary models or together with a trolley or crab in standard cranes, off-standard cranes or systems manufacture. If your requirements are exceptional, the experts in our engineering department will develop customised solutions tailored to them.

Various off-standard designs are available for use in particular conditions. IP 66 protection for example is required for outdoor use without a protective roof or if the hoist is exposed to water jets. If there is a danger of the formation of condensation, or in arctic temperatures, space heaters are required. Even in explosive atmospheres you do not have to manage without the SH wire rope hoist. On request, the entire wire rope hoist programme is available in explosion-protected design for Zone 1, Zone 2, Zone 21 or Zone 22. It’s no coincidence that we are market leader for explosion-protected lifting technology and crane components.

One Crane Source is proud to offer the quality of STAHL products. STAHL hoists are an industry benchmark, offering explosion–protected versions, and custom…

We herewith declare that the STAHL hoist type ST.., with or without trolley, complies with the following provisions applying to it: – EC machinery directive 98/ 37/…

… with electrically adjustable spacing between the hooks, a further gain in work safety and flexibility. Product Catalog (pdf) · Product Catalog (pdf) · STAHL Hoist.

The R. STAHL difference: Perfected design based on 80 years’ experience. Electric wire rope hoists and R. STAHL belong together: decades of experience and…

STAHL’s chain hoist programme is available from 125 to 5,000 kg. A wide variety of application exist – stationary on a suspension hook, with rigid suspension,…

Stahl Hoist High Performance Wire Rope & Chain Hoists. The rigorously modular construction of R. STAHL’s SH and SHW wire rope hoists permits practically…

Morris hoists are no longer made, so we offer the Stahl hoist instead. Below is a price list of most sizes and speeds of powered hoist as well as the headroom…

The SH wire rope hoist the is developed by STAHL CraneSystems. It is designed with five different frame sizes making it definitely one of the primary and leading…

The ST explosion proof chain hoist is a revolutionary product developed by STAHL. It features an approval from the German Federal Physico-Technical Institute…

STAHL CraneSystems has been around for over 130 years with our Chain Hoists and wire rope hoist products. Equipment Manufacturer *. Stahl Hoist & Crane.