stainless steel wire rope fasteners supplier

Murphy offers many sizes of wire rope clips in 4 different fabrications: zinc plated, stainless steel malleable, galvanized drop forged, and stainless steel drop forged.

You can use wire cable clips to secure the loose ends of your wire ropes. They often have nuts, u-shaped bolts, and cast saddles. You can put the wire rope in the bolt and then place the saddle over the bolt’s rope. By using the nuts, you can then secure the rope in its place.

There are a couple of ways to make the process stronger. For example, if you have a cable coated with vinyl, then you can take off the vinyl in the place where you put it in the wire rope clip.

We offer our clips in a range of materials, which gives you more options. You can use the clips for semi-permanent or permanent applications, or just temporary ones. You can use your hand tools to secure them to your stainless steel wire rope. They are also cost-effective.

You can count on our company to offer sturdy and long-lasting clips, so you can secure your loose ends well. We have good knowledge of the requirements of various industries, allowing us to offer you the best products. You can expect our wire rope clips to last for a long time.

With so many different kinds of rope clips and ropes to choose from, we know making a choice can be difficult. Luckily, Murphy Industrial Products, Inc. is here to help. Feel free to contact us today if you want to know more about our stainless steel wire rope clips and related products.

If you are interested in a Wire Rope Clip, you have come to the right place. We offer U-Clips made with stainless steel or galvanized steel. These clamps are used to apply terminations on a cable assembly.

If you are looking for swage sleeves, which fulfill similar functions, we also have those available in their own category. However, if you are interested in picking up some Wire Rope Clips, we have prepared some information that you should find useful.

As we mentioned before, Wire Rope Clamps are used for a similar function to their not-so-distant cousin, the swage sleeve/ferrule. They are used to establish dead-ends and eyes at the end of a wire cable.

While using a clip may decrease the breaking strength of a rope slightly more than a swage would, there are a few advantages over swages. A Wire Rope Clip can be removed and even reused without much wear. This makes clips ideal for less permanent fixes.

When a clip is installed properly, the decrease in the breaking strength of the wire. Eyes installed with Cable Clips will maintain 80-90% of their strength. However, when a clip is not installed properly, the decrease in breaking strength will be much more significant.

Since we just discussed the importance of installing a wire clip properly, let’s talk about what you will need to get this kind of job done. If you already work with wire cables, chances are you already have everything you need.

For the most part, Galvanized Steel is a little easier on your wallet than Stainless Steel and it will take a lot of abuse without much damage to show. However Galvanized Steel is not quite as strong as Stainless Steel and it can’t be used in jobs where the rope may be exposed to saltwater or excessive moisture.

When you are choosing your wire cable, there is a general rule of thumb. Large wires generally stand up very well to abrasion but are not as resistant to fatigue as smaller wires. The size of the rope will help to determine both its strength and flexibility.

Steel Cable Clamps are used in a wide variety of applications. They can be used in towing, loading, rigging, agriculture, and household uses just to name a few areas. The key advantage to using Wire Cable Clamps is that they can be used in any application where an eye termination may need to be removed at some point.

US Rigging are a manufacturer and master distributor of climbing ropes, fall protection equipment, and industrial rigging equipment located in Santa Ana, California. This Orange County based company is proud to provide American Made products with both safety and service in mind. US Rigging has a legacy lasting over 40 years and are known for operational excellence.

We offer a variety of Wire Rope Clips to fulfill your needs in rigging, lifting, towing, and heavy construction applications. These Cable Clips are designed to reliably splice wires with dead-end eye terminations. They are perfect for applications where you need to apply terminations that can be removed.

Wire Rope Clips are efficient metalware for installing loop ends on a cable assembly. Wire Rope Clips are constructed for maximal holding strength. SKUWire ØReq. QtyQty/Pkg K-34-03-25K 1/16” - 3/32” 2 25

Suncor’s wire rope clips and clamps are available in sizes ranging from 1/16″ to 1-1/4″ for all projects, large or small. They are made from grade 316 or grade 304 stainless steel for corrosion resistance and durability and are ideal for marine, industrial and architectural wire rope projects.

We also offer a complete line of wire rope tools and stainless steel accessories including wire rope cutters, thimbles and turnbuckles. For more information, be sure to read our helpful Wire Rope Load Limit and Turnback Guide.

Type 302/304 stainless steel is the standard alloy for use in wire rope and cable. It has about the same strength as galvanized rope or cable but is much more corrosion resistant. It can be used in most industrial atmospheres and has acceptable corrosion resistance when used in marine- and salt water.

Type 316 stainless steel is the standard high corrosion resistant steel for rope and cable. It is resistant to many chemicals in the pulp and paper, photographic, food processing and textile industries. It has the best pitting resistance in marine and salt water and can be used in temperatures up to 480°C (900°F).

1. Always apply the saddle of the wire rope clip to the live end (non turnback end) of the wire rope or cable. “Never Saddle a Dead Horse.” Turn back the specified amount of rope from the thimble. Apply the first clip one base width from the dead end of the wire rope.

The Stainless Steel Wire Rope Clip is often used for marine applications such as fishing, on boats and yachts, or even as part of a culinary or food processing facility. It consists of a U-shaped bolt which fixes the wire rope cable against the saddle when the two nuts are tightened. The saddle should always be against the live portion of the wire rope and not the dead or termination end of the wire rope – this leads to the expression “Never Saddle a Dead Horse”. Two or more Wire Rope Clips are often required for each eye or loop.

Hilifting is a professional stainless steel wire rope clips manufacturer, our simplex stainless steel  wire rope clips is simply loop, the cable clamps each side of the threaded bolt and tighten down the plate using a suitable spanner, we also have duplex wire rope clip for your option.

Although Carl Stahl Sava Industries is known for producing the world’s tungsten, stainless steel and galvanized steel mechanical cable, exotic wire rope materials remain a less common, yet critical member of our family of cable offerings. Nitinol, titanium, Vitallium®, Inconel® and Molybdenum round out Sava’s compliment of specialty mechanical cable materials...

Hilifting is the leading wire rope clips supplier in china, our marine grade wire rope clips are the fittings of stainless steel wire ropes, they are designed to to make eye loops join two layers cable or wire rope ends together, just simply tighten up the nuts on the wire rope grips using a spanner or pliers. Usually, 3 or more wire rope clamps are used to terminate to fasten a wire rope.

Still not sure which stainless steel clip is right for your application? Send email or Call us, our sales team can deal with the projects immediately and professionally.

Alibaba.com offers 2,962 stainless steel wire rope clamp products. such as stainless steel, iron, and zinc. You can also choose from zinc plated, galvanized. As well as from bag, carton. And whether stainless steel wire rope clamp is silver.

Distributor of industrial hardware and supplies. Products include fasteners, abrasive pads, belts, discs, cutting tools, hoses, tubing, cleaning chemicals, degreasers, safety equipment, electrical connectors, plumbing pipe and fittings and pneumatic and hydraulic fittings. Fasteners such as hex nuts, metric hex nuts, screws, bolts, washers, rods, pins and anchors are available. Safety equipment includes face shields, goggles, lockouts, tagouts, respiratory supplies, safety signs, safety tapes and support belts. Abrasive such as crocus cloth, cut-off wheels, drum sanders, emery cloth, flap discs, flap wheels, grinding wheels, mandrels, power sanding discs, rubberized abrasive tips, rubberized abrasive wheels and sandpaper. Cutting tools include collets, countersinks, dies, drills, end mills, files, hole saws, masonry drills, punch sets, reamers, saw blades and taps.