stainless steel wire rope swage fittings brands

SWR supply a wide range of stainless steel rigging components and stainless steel wire rope fittings. Within the range we offer high quality swage terminals such as swage studs, swage forks, swage eyes, swage toggles and swage rigging screws.

All fittings are manufactured to the highest standards, produced from marine grade AISI 316 and after correct installations these swage fittings maintain 90% of the breaking load of stainless steel wire ropes and strands whilst achieving aesthetically pleasing finishes.

Swage fittings are wire rope components other than swage or stop sleeves, that are attached to the wire by compressing, (swaging) the fitting on to the wire. When swaged properly, most wire rope fittings can hold up to 100% of the wire strength, thus allowing assemblies to meet the various working load limits required on assemblies that must be proof load tested. These fittings can be utilized on a wide variety of cable assemblies with many uses. Common types of swage fittings are plain balls (BAS or NAS-949 type), single shank balls, (MS20664 type), stake eyes, aircraft and marine swage eyes and fork ends (MS20668 and MS20667 type.).

Wire rope swage sleeves and fittings are used to terminate the ends of wire ropes to prevent fraying, and to securely form lifting eyes in wire ropes. Cable swage sleeves and wire rope end fittings are very versatile and are an essential part of many wire rope rigging applications.

Here at Tri-State Rigging Equipment we pride ourselves on providing only the highest quality swage sleeves and wire rope end fittings to our customers, from only the most reputable manufacturers. We can provide you with any rigging equipment on the market, so if you cannot find what you are looking for or don’t know exactly what you need, call or email our sales team to speak with a rigging product specialist.

Wire rope swage sleeves, sometimes referred to as cable ferrules or duplex / crimp sleeves, are used to form eyes on the end of wire ropes. Wire rope swage sleeves are a more secure and more permanent alternative to wire rope clips. Cable swage fittings and sleeves are available in a variety of materials to fit any wire rope rigging application:

To properly fit and secure a cable swage sleeve, most use a hydraulic swaging press, while others can be hand crimped using a special hand swage crimping tool. Cable swage sleeves are available in bulk, but we specialize in manufacturing them into complete wire rope assemblies.

These wire rope end fittings are used to allow wire rope to be used in a large variety of rigging applications. Wire rope end fittings are available in bulk, but we specialize in manufacturing them into complete wire rope assemblies.

Tri-State Rigging Equipment is a service provider and distributor for all wire rope cable swage sleeves and wire rope end fittings for rigging and lifting serving clients from coast to coast, Canada, Mexico and especially focused in the states of Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

Make Suncor Stainless your one-stop-shop for all your custom wire rope assembly needs. We stock a large variety of stainless steel wire rope and swage components to provide a quick turnaround on large and small custom assemblies for architectural, marine, industrial and military applications.

Suncor offers a variety of wire rope options and swage components to fit any project. We provide these services so you don’t need to make the large invest in the machinery required. Our capabilities also include the ability to swage large wire rope diameters.

Suncor Stainless is part of an elite ranking of companies in the U.S. Government’s Quality Manufacturer’s List (QML). Suncor has invested extensively in technology, manufacturing and testing to meet the government’s quality and testing requirements for aircraft control cable terminals and assemblies and as a result we are listed in QML-6117 and QPL-781 for these specific components. The 40 qualified stainless steel swage components that are listed in QPL-781 are left hand and right hand Swage Studs (Part # MS21259), Swage Eyes (Part # MS20668), Swage Forks (Part # MS20667) and Single Shank Balls (Part # MS20664C), with sizes ranging from 1/16″ to 3/8″.

Custom manufacturer & distributor of plastic lined steel pipe & fittings, PTFE hose assemblies, stainless steel metal hoses, chemical & petroleum hoses, pharmaceutical hoses, gaskets, fall protection & OPW loading arms, lokring pipe fittings, quick disconnect fittings & industrial rubber products. Industrial rubber products include hydraulic hose assemblies, flexible ducting, expansion joints & bellows & conveyor belting. Services include design & fabrication. Lokring pipe fittings meet CSA-B51-95, ASTM-F1387, NAVSEA, ANSI/ASME B31-1 B31-3 B31-5, NFPA 30 & Exxon API-607 Rev 4 Fire test standards. Pharmaceutical hoses meet CFR 177.26, USP Class VI, FDA, ISO 10993 & 3A standards.

Terminals can be used for yacht rigging and industrial and architectural purposes. Below, you will find a wide selection of swage terminals. These terminals require professional swaging machinery to attach them to wire rope.Our riggers can do this for you. Examples of our rigging terminals are: stemball, toggle, fork and eye terminals. We are happy to advise you on which terminal to chose for your application. We sell swage terminals from various brands, such as Blue Wave, Sta-Lok, Petersen and Selden. When the terminal you need is not listed on our website please contact us. We sell to both consumers and wholesale.