u bolt clips wire rope pricelist

Based on the catalog breaking strength of wire rope, Crosby® wire rope clips have an efficiency rating of 80% for 1/8 - 7/8 in sizes and 90% for sizes 1 in through 3-1/2 in

Wire rope clips, sometimes referred to as u bolt clamps, u bolt clips, u clips, u clamps or cable clamps, are used to secure the loose end of a wire rope when forming an eye. Wire rope u clips have a u-bolt that is secured into a saddle by two nuts. Wire rope assemblies almost always require two, or more wire rope clamps to secure the wire rope properly. When using wire rope cable clamps to form an eye in a wire rope, the working load limit of the wire rope is reduced by about 20%.

Here at Tri-State Rigging Equipment we pride ourselves on providing only the highest quality wire rope clamps from only the most reputable manufacturers. We can provide you with any wire rope clip on the market so, if you are unable to find what you are looking for, or if you don’t know exactly what you need, call or email our sales team to speak with a rigging product specialist.

Wire rope cable clamps come in a variety of materials ranging from galvanized and zinc plated steel, to stainless steel. The two most important different types, however, are drop forged and malleable wire rope u bolt clips.

Drop forged wire rope clips are more heavy duty than malleable rope clips and can therefore be used for more heavy-duty rigging applications. In addition, they are galvanized with a heavy coating of zinc that resists the corrosion and abuse found in rugged work environments. Wire rope cable clamps of every type are not designed to be used in an overhead lift but drop forged wire rope u bolt clamps can be used to suspend an overhead load. This makes wire rope cable clamps ideal for use with:

Regarding the first question, if the load is being moved, wire rope clips are not to be used. If the load is being held in place, heavy-duty drop forged wire rope clips can be used. For the second question, if the load is near the ground, malleable wire rope clips may be used, as their lighter duty design is more than enough for the job. On the other hand, if the load is being suspended above the ground, heavier duty drop forged wire rope clamps must be used.

In the rigging and lifting industry there is a common saying that is used to remember the correct way to use wire rope u clips: “Never saddle a dead horse.” This means that the saddle of the u clamp should always be in contact with the live side of the wire rope rather than the dead side. The dead side of the wire rope is the side of the eye that has the cut end. The dead end is attached to the live end of the wire rope to form an eye and it is imperative that the saddle be on the live side of the wire rope.

Tri-State Rigging Equipment is a service provider and distributor for all wire rope cable clamps, and u bolt clips for rigging serving clients from coast to coast, Canada, Mexico and especially focused in the states of Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

WIRE ROPE END FITTINGS Forged Wire Rope Clip • Each base has a Product Identification Code (PIC) for material traceabilit, the name CROSBY or CG, and a size forged into it. • Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 1/8” through 7/8” sizes, and 90% for sizes 1” through 3-1/2”. • Entire Clip is Galvanized to resist corrosive and rusting action. • Sizes 1/8” through 2-1/2” and 3” have forged bases. • All Clips are individually bagged or tagged with proper application instructions and warning information. • Clip sizes up through 1-1/2” have rolled threads. • Meets or exceeds all requirements of ASME B30.26 including identification, ductilit, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. • Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips. Page 56 Para Espanol: www.thecrosbygroup.com Rope Size * Electro-plated U-Bolt and Nuts. ** 2-3/4” and 3-1/2” base is made of cast steel. Copyright © 2019 The Crosby Group LLC All Rig

We have invested millions of dollars in our own test labs and factories, so our tools will go toe-to-toe with the top professional brands. And we can sell them for a fraction of the price because we cut out the middleman and pass the savings on to you. It"s just that simple!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Byculla, Mumbai No. 2/14, Pais Street, Byculla West, Opposite Kinjal Towers Near Veena Killedar Industrial Estate, Byculla, Mumbai - 400011, Dist. Mumbai, Maharashtra

West Mambalam, Chennai New No. 21, Old No. 9, First Floor, Rajagopalan Street (Off Jubilee Road) West Mambalam, West Mambalam, Chennai - 600033, Dist. Chennai, Tamil Nadu

We deals in Forged Pipe Fittings, Butt Weld Fittings, Dairy Fittings, Flanges, Fasteners, Refractory Anchors, Plates, Sheets & Coils, Pipes & Tubes, Bars and Olets. In addition, we also offer Angle & Channel, Titanium Products, Inconel, Monel and hastelloy Products and Duplex & Super Duplex Products.

JALALPURA, Nagpur Shri Gokulesh Bhavan, Near Rapid Transport Co., Behind Prateesh Sales Near Madhur Courier, Opposite Shankar Mandir, Gandhi Bagh,, JALALPURA, Nagpur - 440002, Dist. Nagpur, Maharashtra