what is a wire rope thimble quotation

Wire Rope Thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured. Greater protection against wear and deformation of the wire rope eye. Longer service life.

Wire rope thimbles also known as cable thimbles, are used for making reinforce loop(eyelet) with grips, clips or clamps by preventing fraying caused by friction at the bearing anchor point to protect and extend the service life of the wire rope or sling. They are just one of the many types of wire rope fittings (ferrules, wire rope clips, terminals, etc.).

Wire rope thimbles are available in a variety of strengths and materials(carbon steel and stainless steel, see our post on Surface Finish: 4 Common Types You Should Know) but mainly they come in two different duty grades.

If you use it in high moisture or corrosive environments, recommend our stainless steel wire rope thimbles which can offer resistance to corrosion on the surface, particularly in marine applications.

Simply wrap the end of the wire rope around the outer groove of the thimble, lace the dead end of the wire rope past the U-bolt of the wire rope grips or a wire rope ferrule crimp to hold onto the bearing anchor point at the end of the thimble to prevent fraying caused by friction.

Once in place, put another wire rope clip as near the loop you just wrapped over the thimble. Turn nuts firmly but do not yet tighten to the proper torque, we recommend using a crimping/swaging tool to compress the ferrule firmly onto the rope to hold your thimble loop securely.

Alternatively, you can use a wire rope ferrule crimp to secure your thimble in place. this method is quick and easy to install. For further information on installation using a wire rope ferrule please – click here

Wire rope thimbles are used in conjunction with cable and rope to protect the eyes and will allow for smooth rope guiding around natural curves. So that the most important thing is to make sure the thimble eye securely fastened. Here are some tips for correctly using wire rope thimble:

Make sure that the cable thimbles size properly and securely fastened in the eye of the loop, not too loose or too tighten, so they can create an extra layer of support to connect with other properly sized rigging fittings.

While you are using a vinyl coated cable, you should multiply the actual size of the cable, usually use a larger size thimble than normal, for the actual diameter is the thickness of the vinyl coating plus the inside wire rope diameter. For example, if you are using a 5/16″ vinyl coated cable that is coated to 3/8″ diameter, you’d want to use a 3/8″ wire rope thimble.

My name is William Yang, I’m the business manager of Hilifting. I have been in Rigging industry for more than 10 year. Feel free to contact us. I’m happy to provide you the best service and products.

Thimbles are designed to extend the longevity of wire rope loops by preventing fraying that can occur due to friction at the bearing point. Thimbles must be used in conjunction with either sleeves or wire rope clips in several specifications.

Wire eye bolts are intended for light duty applications such as, tie-downs and wire guiding. These eye bolts are also referred to as bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut. Eye bolts feature a closed loop design that secures cables and chains in order to support the weight of heavy hanging objects such as plumbing pipes and wires.

What is a thimble end fitting?A thimble is a special type of heavy duty, grooved metal end fitting. Its goal is to protect the fastening loop of a wire rope.

We define “at-risk loops,” by loops that are at risk of bending under the weight of a load or are under the forces of abrasion. Thimble for wire rope is installed on the inside of a loop, protecting the cable from abrasion and preserving the loops open shape.

How does Tyler Madison secure thimble end fittings?Thimbles are fashioned inside the loops by including them in the looping process. They are wrapped tightly inside once the expanding sleeve is swaged using a hydraulic swage machine.

What materials does Tyler Madison use to produce standard thimble end fittings?We make our thimble endings out of cold rolled steel (AN100 type), galvanized steel or stainless steel.

However, thimble end fitting applications rely on strength, corrosion resistance, abrasion resistance and durability. Few materials outside of the steel family meet all of these qualifications without great manipulation or alteration.

Thimble end fittings work very well on cable railing, stainless steel medical cables and wire rope tethers, and anything that is under large consistent tension forces.

Nevertheless, the only way to know for sure whether or not thimble end fittings are right for your application is by talking over your specifications and requirements with a member of our staff. Give us a call today, and we will steer you in the right direction.

Just a handful of industries in which you can use thimble end fittings include: construction and building, agriculture and farm equipment, marine and boating, material handling, industrial machinery manufacturing and automotive manufacturing and repair.

Who is Tyler Madison?Tyler Madison is a leading American wire rope manufacturer based out of Apple Valley Minnesota. We create high quality wire rope fittings, wire rope lanyards, cable railing, wire rope tethers and countless standard and custom wire rope cable assemblies.

Why choose Tyler Madison?Tyler Madison is energized by challenges! We have the capabilities and know-how to create wire rope assemblies for high-stake applications. These include aircraft cable assemblies, military cables, stainless steel medical cables and push pull control cables. From start to finish, we create your wire rope assemblies using the latest technology and the best quoting practices.

To further accommodate your needs, we also offer a series of secondary services. These include: coiling and packaging, design assistance, pull testing for cable strength, hot stamping of parts numbers, kanban programs, just-in-time (JIT) programs, kitting, cable rewinding and fuse cutting.

The purpose of thimbles are to underline and support the eyes made by looping the exteriors of wire ropes together. As alternatives to wire clips and swage sleeves thimbles create a durable wear surface & aid in supporting the wire rope eye by preventing pinching and fraying of the wire rope. Thimbles can be used with swage sleeves or wire rope clips.

Available in standard duty, heavy duty, zinc plated, galvanized, stainless steel material. US Rigging offers a wide variety of metals and sizes to best suit your needs, Including AN100 type and Federal Spec FF-T-276 B type. gusseted. tube and nylon thimbles.

The purpose of thimbles are to underline and support the eyes made by looping the exteriors of wire ropes.Thimbles create a durable wear surface & aid in supporting the wire rope eye. For durability, the use of stainless steel thimbles allows for the use in highly corrosive environments; As such, stainless steel thimbles supply additional security from erosion and deformation of the eye. In settings where a highly corrosive environment is not likely, US Rigging offers a wide variety of metals and sizes to best suit your needs.

Keep your wire rope, and wire rope eyes safe with our cable thimbles. Sava Industries is a wire rope thimble manufacturer offering cable thimbles constructed from galvanized, plated, and stainless steel. Our wire thimbles are offered in Mil-spec & commercial product grade. Get a quote for your business today, and speak to our experts about any questions you may have about galvanized, plated, or stainless steel wire rope thimble installation, thimble eyes, and wire rope clamp capacity.

Wire Rope Thimbles are used for distributing weight evenly around the loop, and protect wire rope assemblies from damage and wear. Zinc-plated steel thimbles provide good corrosion resistance in most environments. For better corrosion resistance, choose hot-dipped galvanized steel thimbles that have a thicker zinc coating.

Type 304 and 316 stainless steel thimbles exhibit excellent corrosion resistance. Wire Rope Clips are malleable iron clips are good where corrosion is not a factor.

Forged steel clips are stronger than malleable iron clips and is also good for applications where corrosion is not a factor. Hand held models are sued to cut smaller wire rope diameters including safety wire, truck and rail security cables. Hydraulic wire rope cutters are made to cut the toughest cables, clean and without affecting the roundness of the wire rope. Impact cutters are portable, easy to operate, and are actuated by using a hammer and striking a few hard blows to effect a perfect cut.

Fortune Rope is an industry-recognized supplier of aircraft cable, wire rope, chain, coated cable, and hardware fittings to a wide range of industrial and commercial customers who has the in-house capability to fabricate the custom cable assemblies you need — from one assembly to medium or high volume production runs.

LIGHT DUTY WIRE ROPE THIMBLE USED FOR SMALL WIRE DIAMETER TO PROTECT FROM DAMAGE DURING LIFTING.WE HERE AT PRECISION ENGINEERIG WORKS DO MANUFACTURE THESE THIMBLEread more...

We are the leading trader, exporter and suppliers of a broad array of Wire Rope Thimbles. These thimbles are designed specifically for commercial and industrial applications. The offered thimbles are manufactured using excellent quality stainless steel and advanced technology at our vendor’s end. Theseread more...

Our range of Galvanized Thimbles is quality-tested at different levels of production and the raw-materials are sourced from certified vendors of the country. We also provide our clients with different modes of payments, timely delivery of our products and customize them based on their requirements.

Sanpada, Navi Mumbai, Dist. Thane Chawla Warehouse No. 5, Plot No. 44-9, Sector-18 Turbhe Road, Mafco Yard, Vashi, Sanpada, Navi Mumbai - 400703, Dist. Thane, Maharashtra

We are suppliers , traders , exporters , manufacturers , stockists in : Mumbai , Bengalore , Bengaluru , chennai , madras , Hyderabad , Kolkata , Ahmedabad , Pune , Surat , visakhapatnam , Coimbatore , belgaum , jamshedpur , kanpur , patna , kolkata , delhi , Afghanistan, Albania, Algeria,read more...

Koramangala, Bengaluru 972/C, V3 Towers, 2nd Floor, S. T. Bed Layout Koramangala, 4th Block, Near Swathi Maharaja Hotel Koramangala, 4th Block, Near Swathi Maharaja Hotel, Koramangala, Bengaluru - 560034, Dist. Bengaluru, Karnataka

Parrys, Chennai No. 46/95, Tahir Complex, First Floor, Behind Kalikambal Temple Armenian Street, Parrys, Parrys, Chennai - 600001, Dist. Chennai, Tamil Nadu

Our organization is an applauded name in offering Wire Rope Thimble to our clients. It is widely used in wire rope assemblies for keeping eye from being crushed. Offered range is used for forming wire rope loops and is offered in different sizes to our clients. This can be availed in different dimensions as per requirements ofread more...

George Town, Chennai No. 137/3, Angappa Naicken St., Facing Errabalu Chetty Street, Post Box No. 1699 PARRYS, George Town, Chennai - 600001, Dist. Chennai, Tamil Nadu

George Town, Chennai New No. 304, Old No. 170, Linghi Chetty Street, Parrys, Opposite To Singapore Plaza, George Town, Chennai - 600001, Dist. Chennai, Tamil Nadu

Wire rope thimbles are fittings used with wire rope to preserve the natural shape of the loop and protect the cable from pinching on the inside of the loop. Our metal thimble sizes range from 1/8” rope size up to 2-1/4” rope size and are available in hot dipped galvanized and stainless steel. Stainless steel thimbles are recommended for more corrosive environments where greater protection is needed, whereas galvanized thimbles are recommended for light duty applications in which it is being assembled into another fitting such as a shackle or master link. Shop our selection of bulk and small quantity thimbles or contact us with any questions. We’re here to help!

Carbon Steel – Hot Dipped Galvanized Wire Rope Thimble – Meets specification FF-T-276b, Type lll. Sizes 1/8” and 3/16” are Standard Type meeting specification FF-T-276b, Type ll.

304 Stainless Steel Wire Rope Thimble - Meets specification FF-T-276b, Type lll. Sizes 1/8” and 3/16” are Standard Type meeting specification FF-T-276b, Type ll.