wire rope and rigging mobile al free sample

The Certex branch in Muscle Shoals carries a wide variety of safety products including rigging equipment and lifting supplies. We also specialize in fall protection, providing not just the equipment you need, but comprehensive training for your workforce.

In addition to Muscle Shoals, there are Alabama locations in Birmingham and Mobile. In fact, there are 34 locations in the U.S. servicing 11 states from California to South Carolina. We’ve been in business for over 50 years, which is why we’re a trusted supplier in Alabama and around the country.

The Muscle Shoals branch provides products and services to a variety of industries – from agriculture to manufacturing to steel. Find out why companies like Bunge Corporation, B&B Roadway and Nucor Steel turn to Certex for their safety needs.

This is just a sample of our clients and the industries we work with, as we provide safety products and services to companies across the state and beyond. For example, one of our high-profile projects includes supplying the US Corps of Engineers with the cable assemblies for locks at the Wilson Dam, Guntersville Dam and Kentucky Dam. Wilson Dam is a dam spanning the Tennessee River between Lauderdale County and Colbert County in Alabama. Guntersville Dam is a hydroelectric dam on the Tennessee River in Marshall County, Alabama. Kentucky Dam is a hydroelectric dam on the Tennessee River on the county line between Livingston and Marshall counties in Kentucky.

No matter the size or scope of your project, our Muscle Shoals team is ready to help you determine the products best suited for your job. You can count on the experienced staff, led by manager Danny Elliott, to meet your safety needs. Our branch is open Monday-Thursday 7:30am-4:30pm and Friday 7:00-4:00pm, but we are available 24/7.

Looking for rigging equipment and lifting supplies in Alabama? You’ve come to the right place. Our location at 1904 Webster Street can help with all your rigging and lifting needs. We carry а large inventory of rigging hardware such as hooks, shackles, turnbuckles, blocks, and more.

For cargo control, we have a full line of chains, binders, and winches. We also offer lever hoists, chain falls, and air and electric hoists from some of the worlds most respected manufactures.

We have a wide variety of wire rope accessories like locking hooks, eye hooks, swivel hooks, sliding choker hooks, sliding latch type choker hooks, snap hooks, swivels, wire rope thimbles, and turnbuckles.

At Certex Muscle Shoals, we also house specialty equipment such as a 100 Ton test bed, which is used to tension test lifting gear. We can also perform rigging inspections on your job site. Because of our proximity to the Tennessee River, we carry equipment specific to boating such as boat hoists.

You’ll find a variety of wire rope constructions and capacities at Certex. From small diameter GAC wire ropes to large high-performance ropes, you will discover that there isn’t just one type of wire rope that’s perfect for every job.

Wire rope is made up of all independent parts – wires, strands and cores – that continuously interact with each other during service. Wire rope engineers design those parts in differing steel grades, finishes and a variety of constructions to attain the best balance of strength, abrasion resistance, crush resistance, bending fatigue resistance and corrosion resistance for each application.

If you need something lighter than wire rope, we specialize in AmSteel®-Blue and Stable Braid. AmSteel®-Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel—yet it floats. AmSteel®-Blue is a proven cost-saving replacement for wire rope in key applications where strength, weight and safety are important.

Certex Muscle Shoals provides an extensive inventory of fall protection equipment from top manufacturers like 3M, Climbtech and Latchways Fall Protection. Our staff is experienced in fall protection and can conduct training right on your job site.

You also have the option to send your team to our Tucson AZ or Bakersfield CA branches where we have two of the country’s best Fall Protection and Rescue Training facilities. There your team will participate in immersive learning with 8 hours of hand-on experience working with equipment from over 20 different manufacturers. The modern, climate-controlled environment creates ideal surroundings and every course meets or exceeds applicable ANSI Z359, OSHA Sub Part M, CSA and manufacturers requirements.

We have a two-day course for fall-protection competent person (which includes equipment inspector training), an authorized user course, equipment inspector course and competent person refresher.

Proper training increases profitability and productivity for your company, and we can create courses specific to your needs. We also provide expert consulting and hazard analysis.

Certex has been serving Alabama’s companies for over 45 years. As mentioned previously, we work with Bunge Corporation, B&B Roadway and Nucor Steel. Other clients include Constellium (global producer of aluminum semi-products), Freightcar America (manufacturer of railway freightcars), SCA Tissue (producer of wood products, pulp, paper and packaging material), and Tennessee Valley Authority.

Whether you need on-site fall protection training, or you’re looking for premier safety products, Certex is a respected and experienced supplier. You’ll find a dedicated team on hand, waiting to help you meet your safety needs. Reach out to discuss your budget, the type of rigging equipment, lifting products, hand tools, safety supplies, and training your company needs to get the job done.

Marine & Industrial has provided the lifting and rigging industry premium brand products and first-class customer service since 1975. As an innovative supply leader, Marine & Industrial has developed a reputation for our well-trained employees, efficient safety standards and seamless operations that supply our Gulf Coast neighbors and offshore clients with the best service in the industry. Big or small, local or international, Marine & Industrial is your friendly and dependable one-stop-shop for high-quality service and top-brand equipment.

A tremendously valuable resource for riggers, crane operators, in-house maintenance personnel and engineers. Attention to detail is unsurpassed, addressing wire rope and inspection, rigging hardware, slings and safe working loads, chain data, calculating sling load & angles, pre-lift planning, critical lift planning, ANSI/OSHA standards, mobile crane set-up and stability, boom trucks, railroad cranes, offshore cranes, tower cranes, overhead cranes, and yes - there"s more! - Training Manual, Spir

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Wisconsin’s premier supplier of rigging and lifting equipment, and hoist cranes;  All-Lift Systems is an industrial manufacturer based in Neenah, Wisconsin.

We provide many rigging and lifting equipment solutions including hoist cranes, web slings, round slings, and chain slings. In addition, we manufacture hand and mechanical spliced wire rope slings and fall protection safety lines. We are a manufacturer of custom solutions for material handling; let us help you design the sling or assembly you need to get the job done! When you think lifting, think All-Lift, All the Time!

CLEVELAND, OH – Mazzella Lifting Technologies, a Mazzella Company, is pleased to announce the acquisition of Denver Wire Rope & Supply. This acquisition will strengthen Mazzella’s footprint west of the Mississippi River and reinforce Mazzella’s commitment to be a one-stop resource for lifting and rigging services and solutions.

Denver Wire Rope & Supply has been in business since 1983 and services a variety of industries out of their location in Denver, CO. Denver Wire Rope & Supply is a leading supplier of rigging products, crane and hoist service, below-the-hook lifting devices, and certified rigging inspection and training. Effective immediately, Denver Wire Rope & Supply will operate as Mazzella / Denver Wire Rope. Terms of the transaction are not being disclosed.

“Denver Wire Rope & Supply will complement the wide range of products and services that Mazzella Companies offers. We are dedicated to being a single-source provider for rigging products, overhead cranes, rigging inspections, and rigging training. Both companies commit to a customer-first mentality, providing the highest-quality products, and leading by example when it comes to safety and sharing our expertise with customers and the market,” says Tony Mazzella, CEO of Mazzella Companies.

This acquisition will provide Mazzella Lifting Technologies with a western U.S. location that will allow them to grow and expand their reach past the Oklahoma City market.

“Our team and family are excited to be part of the Mazzella Companies. This acquisition strengthens our place in the market and allows our team to continue to provide excellent service and products to our valued customer base and expand our offering,” says Ken Gubanich, President of Denver Wire Rope & Supply.

“Over the years, we have had numerous companies show interest in purchasing Denver Wire Rope & Supply, none seemed to be the right fit. We are looking forward to becoming a part of an aggressive, passionate, and progressive organization. As a family business for over 36 years, it is important to us that our customers/friends, suppliers, and team members continue to be treated with first-class service, products, and employment opportunities. Again, we are very enthusiastic about our future and look forward to being a quality supplier for your crane, safety training, rigging, and hoisting needs for years to come,” says Gubanich.

“We wish Ed and Carol Gubanich all the best in their retirement. We welcome Ken and the other second and third-generation Gubanich family members, as well as the entire Denver Wire Rope Team, into the Mazzella organization,” says Mazzella.

We’ve changed our name from Denver Wire Rope to Mazzella. Aside from the new name and logo, our member experience is virtually unchanged. Here are some common questions and answers related to this change.

In 2019, Denver Wire Rope & Supply was acquired by Mazzella Companies to expand lifting and rigging products and services to the western half of the United States.

In 1954, James Mazzella founded Mazzella Wire Rope & Sling Co. in Cleveland, OH. For over 65 years, the company has grown organically by nurturing historic relationships, expanding its product offerings, and entering new markets through acquisition.

Today, Mazzella Companies is one of the largest privately held companies in the lifting and rigging industries. Since our humble beginnings, we’ve grown to over 800 employees with over 30 locations across North America. Our product offerings have expanded from basic rigging products, to include:Overhead crane fabrication

One thing that hasn’t changed is our commitment to a no-excuses, customer-first mentality that extends from the shop floor to the front office. Some of the major markets Mazzella serves are: Mining, Steel, Oil & Gas, Construction, Energy, Shipbuilding, Vehicle and Durable Goods. Mazzella’s diverse portfolio includes Sheffield Metals a manufacturer and distributor of coated bare metal products for engineered metal roof and wall systems. New Tech Machinery is a manufacturer of portable roof panel and gutter machines—recognized as the world’s finest portable rollformers.

Just the name. We want to be clear that our people, locations, products, and services have not changed. We will be moving to the Mazzella name for all rigging brands under the Mazzella Companies umbrella in order to create a better experience for our customers and employees.

With all the Mazzella rigging locations working as one team and under one name, your level of service and support will be improved exponentially. Nothing will change in terms of the local team you’re used to working with. The same people will still be here—the only thing that will be changing will be the name of the organization they work for. You now have more resources, inventory, and clearer lines of communication. Our goal is to improve your experience and instill confidence and comfort in every interaction.

Mazzella is experiencing rapid growth. With this growth, we can better serve our customers as one team under the Mazzella name, versus many companies operating independently. The only change you will experience will be better service and improved lines of communication between our people and yours.

For sure! We hope to expand our service line across the entire United States. With over 30 locations, your level of service should only be improved and lines of communication more clear.

Wire rope forms an important part of many machines and structures. It is comprised of continuous wire strands wound around a central core. There are many kinds of wire rope designed for different applications. Most of them are steel wires made into strands wound with each other. The core can be made of steel, rope or even plastics.

Wire ropes (cables) are identified by several parameters including size, grade of steel used, whether or not it is preformed, by its lay, the number of strands and the number of wires in each strand.

A typical strand and wire designation is 6x19. This denotes a rope made up of six strands with 19 wires in each strand. Different strand sizes and arrangements allow for varying degrees of rope flexibility and resistance to crushing and abrasion. Small wires are better suited to being bent sharply over small sheaves (pulleys). Large outer wires are preferred when the cable will be rubbed or dragged through abrasives.

There are three types of cores. An independent wire rope core (IWRC) is normally a 6x7 wire rope with a 1x7 wire strand core resulting in a 7x7 wire rope. IWRCs have a higher tensile and bending breaking strength than a fiber core rope and a high resistance to crushing and deformation.

A wire strand core (WSC) rope has a single wire strand as its core instead of a multistrand wire rope core. WSC ropes are high strength and are mostly used as static or standing ropes.

Wire ropes also have fiber cores. Fiber core ropes were traditionally made with sisal rope, but may also use plastic materials. The fiber core ropes have less strength than steel core ropes. Fiber core ropes are quite flexible and are used in many overhead crane applications.

The lay of a wire rope is the direction that the wire strands and the strands in the cable twist. There are four common lays: right lay, left lay, regular lay and lang lay. In a right lay rope the strands twist to the right as it winds away from the observer. A left lay twists to the left. A regular lay rope has the wires in the strands twisted in the opposite direction from the strands of the cable. In a lang lay rope, the twist of the strands and the wires in the strands are both twisted the same way. Lang lay ropes are said to have better fatigue resistance due to the flatter exposure of the wires.

Wire ropes are made mostly from high carbon steel for strength, versatility, resilience and availability and for cost consideration. Wire ropes can be uncoated or galvanized. Several grades of steel are used and are described in Table 1.

Steel cable wire is stiff and springy. In nonpreformed rope construction, broken or cut wires will straighten and stick out of the rope as a burr, posing a safety hazard. A preformed cable is made of wires that are shaped so that they lie naturally in their position in the strand, preventing the wires from protruding and potentially causing injury. Preformed wire ropes also have better fatigue resistance than nonpreformed ropes and are ideal for working over small sheaves and around sharp angles.

Lubricating wire ropes is a difficult proposition, regardless of the construction and composition. Ropes with fiber cores are somewhat easier to lubricate than those made exclusively from steel materials. For this reason, it is important to carefully consider the issue of field relubrication when selecting rope for an application.

There are two types of wire rope lubricants, penetrating and coating. Penetrating lubricants contain a petroleum solvent that carries the lubricant into the core of the wire rope then evaporates, leaving behind a heavy lubricating film to protect and lubricate each strand (Figure 2). Coating lubricants penetrate slightly, sealing the outside of the cable from moisture and reducing wear and fretting corrosion from contact with external bodies.

Both types of wire rope lubricants are used. But because most wire ropes fail from the inside, it is important to make sure that the center core receives sufficient lubricant. A combination approach in which a penetrating lubricant is used to saturate the core, followed with a coating to seal and protect the outer surface, is recommended. Wire rope lubricants can be petrolatum, asphaltic, grease, petroleum oils or vegetable oil-based (Figure 3).

Petrolatum compounds, with the proper additives, provide excellent corrosion and water resistance. In addition, petrolatum compounds are translucent, allowing the technician to perform visible inspection. Petrolatum lubricants can drip off at higher temperatures but maintain their consistency well under cold temperature conditions.

Asphaltic compounds generally dry to a very dark hardened surface, which makes inspection difficult. They adhere well for extended long-term storage but will crack and become brittle in cold climates. Asphaltics are the coating type.

Various types of greases are used for wire rope lubrication. These are the coating types that penetrate partially but usually do not saturate the rope core. Common grease thickeners include sodium, lithium, lithium complex and aluminum complex soaps. Greases used for this application generally have a soft semifluid consistency. They coat and achieve partial penetration if applied with pressure lubricators.

Petroleum and vegetable oils penetrate best and are the easiest to apply because proper additive design of these penetrating types gives them excellent wear and corrosion resistance. The fluid property of oil type lubricants helps to wash the rope to remove abrasive external contaminants.

Wire ropes are lubricated during the manufacturing process. If the rope has a fiber core center, the fiber will be lubricated with a mineral oil or petrolatum type lubricant. The core will absorb the lubricant and function as a reservoir for prolonged lubrication while in service.

If the rope has a steel core, the lubricant (both oil and grease type) is pumped in a stream just ahead of the die that twists the wires into a strand. This allows complete coverage of all wires.

After the cable is put into service, relubrication is required due to loss of the original lubricant from loading, bending and stretching of the cable. The fiber core cables dry out over time due to heat from evaporation, and often absorb moisture. Field relubrication is necessary to minimize corrosion, protect and preserve the rope core and wires, and thus extend the service life of the wire rope.

If a cable is dirty or has accumulated layers of hardened lubricant or other contaminants, it must be cleaned with a wire brush and petroleum solvent, compressed air or steam cleaner before relubrication. The wire rope must then be dried and lubricated immediately to prevent rusting. Field lubricants can be applied by spray, brush, dip, drip or pressure boot. Lubricants are best applied at a drum or sheave where the rope strands have a tendency to separate slightly due to bending to facilitate maximum penetration to the core. If a pressure boot application is used, the lubricant is applied to the rope under slight tension in a straight condition. Excessive lubricant application should be avoided to prevent safety hazards.

Some key performance attributes to look for in a wire rope lubricant are wear resistance and corrosion prevention. Some useful performance benchmarks include high four-ball EP test values, such as a weld point (ASTM D2783) of above 350 kg and a load wear index of above 50. For corrosion protection, look for wire rope lubricants with salt spray (ASTM B117) resistance values above 60 hours and humidity cabinet (ASTM D1748) values of more than 60 days. Most manufacturers provide this type of data on product data sheets.

Cable life cycle and performance are influenced by several factors, including type of operation, care and environment. Cables can be damaged by worn sheaves, improper winding and splicing practices, and improper storage. High stress loading, shock loading, jerking heavy loads or rapid acceleration or deceleration (speed of the cable stopping and starting) will accelerate the wear rate.

Corrosion can cause shortened rope life due to metal loss, pitting and stress risers from pitting. If a machine is to be shut down for an extended period, the cables should be removed, cleaned, lubricated and properly stored. In service, corrosion and oxidation are caused by fumes, acids, salt brines, sulfur, gases, salt air, humidity and are accelerated by elevated temperatures. Proper and adequate lubricant application in the field can reduce corrosive attack of the cable.

Abrasive wear occurs on the inside and outside of wire ropes. Individual strands inside the rope move and rub against one another during normal operation, creating internal two-body abrasive wear. The outside of the cable accumulates dirt and contaminants from sheaves and drums. This causes three-body abrasive wear, which erodes the outer wires and strands. Abrasive wear usually reduces rope diameter and can result in core failure and internal wire breakage. Penetrating wire rope lubricants reduce abrasive wear inside the rope and also wash off the external surfaces to remove contaminants and dirt.

Many types of machines and structures use wire ropes, including draglines, cranes, elevators, shovels, drilling rigs, suspension bridges and cable-stayed towers. Each application has specific needs for the type and size of wire rope required. All wire ropes, regardless of the application, will perform at a higher level, last longer and provide greater user benefits when properly maintained.

Lubrication Engineers, Inc. has found through years of field experience, that longer wire rope life can be obtained through the use of penetrating lubricants, either alone or when used in conjunction with a coating lubricant. Practical experience at a South African mine suggests that life cycles may be doubled with this approach. At one mine site, the replacement rate for four 44-mm ropes was extended from an average 18.5 months to 43 months. At another mine, life cycles of four 43-mm x 2073 meter ropes were extended from an average 8 months to 12 months.

In another study involving 5-ton and 10-ton overhead cranes in the United States that used 3/8-inch and 5/8-inch diameter ropes, the average life of the ropes was doubled. The authors attribute this increased performance to the ability of the penetrating lubricant to displace water and contaminants while replacing them with oil, which reduces the wear and corrosion occurring throughout the rope. A good spray with penetrating wire rope lubricant effectively acts as an oil change for wire ropes.

In these examples, the savings in wire rope replacement costs (downtime, labor and capital costs) were substantial and dwarfed the cost of the lubricants. Companies who have realized the importance of proper wire rope lubrication have gained a huge advantage over those who purchase the lowest priced lubricant, or no lubricant at all, while replacing ropes on a much more frequent basis.

Horizon Cable Service, Inc. is seeking a RIGGING HAND in Oklahoma City, OK. We are a 40+ year old company in the Oil & Gas Industry offering competitive pay and a 401K. Health insurance, dental, and vision included. Opportunity for travel/relocation. Want to know more about your future career? Email us today! rsample@horizoncableinc.com.

We are a nationwide company with 17 sales offices located in the United States. We are industrial distributors and fabricators specializing in lifting and rigging products. Currently, we have an immediate opening for a General Manager with strong leadership qualities and organizational skills.

The General Manager ensures that all operations/sales are carried out in a timely, financially sound manner consistent with the Company’s goals and quality standards.

• Provide management oversight to the warehouse staff regarding the tactical operating needs in support of the goal to maximize efficiencies, increase quality and exercise safety procedures.

• Provide direction for the recruitment, selection, orientation, development and retention of a high caliber staff; ensures that well qualified individuals are hired and properly trained to carry out the organization’s mission.

DCL Mooring and Rigging is a growing New Orleans-based company seeking a professional to join our team as Sales Executive in our New Orleans office. This position reports to the Director of Sales and works closely with other Sales Executives. This person will generate sales of DCL’s products and services and close sales opportunities while maintaining favorable and supportive relationships with customer, company and supplier personnel. We are looking for a self-driven, motivated and customer-oriented individual who will be a positive addition to our staff.

The ideal candidate will have impressive communication and organizational skills, be highly energized and a progressive thinker. They must be engaged and diligent in pursuit of their goals. They should excel at the basic skills of multi-tasking, working under pressure and computer proficiency. Superior negotiation skills, a positive track record in customer service, and a history of building customer relations are a must.

We are seeking an individual with technical sales and production experience in the lifting industry to assist our production team, sales professionals, and distributors with their knowledge of sling manufacturing processes, product offerings and industry applications.

You must be familiar with the technical aspects of lifting products, overhead lifting, and the material handling industry. Candidates will have responsibilities within all aspects of production and sales management and will work closely with the VP of Sales & Operations and President of the company to ensure continued growth and prosperity.

Must have at least (5) years’ experience in the lifting and rigging industry. Must be reliable and have used an ERP operating system. Technical aptitude is required. Engineering background preferred. Spanish speaking would be an asset. Must be the example of the company’s essential core values of; Accountability, Teamwork, Commitment, Integrity, Respect, Quality, and Communication.

We are offering a competitive salary with benefits including profit sharing. Relocation packages are available for the right Candidate. If interested, please e-mail your resume to; jocilyn.waycott@stren-flex.com.

Certified Slings & Supply has a warm winter waiting for you. We offer great benefits, growth opportunities, and we are always looking for great team members. Apply at www.certifiedslings.com/careers or send resume to HR@certifiedslings.com. Equal Opportunity Employer/VET/Disability.

Rigging Shop Assistant Manager; Required Rigging Fabrication/Sales Experience. We also provide rigging and safety training and inspections. Benefits include paid health insurance and the possibility to take over the business. Send inquiries to trshiring@gmail.com.

Growing chain and wire rope industrial supplier and rigging shop in Worcester, MA is seeking a Technical Sales Manager/Product Specialist to help run a company that has been in business for 100 years and that has many opportunities to grow. Candidates are primarily responsibilities for taking the lead on high level, technical sales quotes and must be familiar with the technical and engineering aspects of the chain & wire rope industry, overhead lifting, and material handling solutions market.

Candidates will also be responsible for growing revenue, developing new and key accounts, and overseeing two outside sales reps. Position also responsible for streamlining internal operations. Must have a BS/BA and be reliable, honest, a team player, and have knowledge of the wire rope industry. Technical aptitude is required. Engineering background preferred.

A 34 year-old successful Western USA Wire Rope Distributor is looking for a General Manager to manage the various departments of the company. Many benefits include paid Health Insurance and a retirement plan. Please email resume as well as salary requirements to: job2017@uymail.com.

Experience in industrial sales including, but not limited to, oilfield, mining and mineral processing, heavy lifting, construction and material handling is a plus. Salary and commission commensurate with experience and educational background.

Located in Mexico City or Queretaro the position requires 50% travel and a valid driver’s license. Travel to US required for training, sales meetings and trade shows. English language proficiency both written and spoken. Basic computer skills should include Word and Excel.

Pewag is a 500+ year old chain and lifting components manufacturing company dedicated to our customers’ success and the development of our personnel at all levels. Joining our team means a future with worldwide growth opportunities.

We are an equal opportunity employer. If you are, or know of, a Mexican national ready for a challenging career with an internationally recognized industry leader contact us in English or Spanish: Rich Montgomery richm@pewagchain.com or Alan Gonzalez gna@pewag.com . Pewag México S.A. de C.V.

At Fiber-Line, we understand that our greatest asset is our people. Our mission is “treat others the way you want to be treated”. We offer competitive compensation, comprehensive benefits and opportunities for professional growth and development. If you are interested in joining a growing company and enjoy solving complex challenges, consider joining our team!

We are seeking an individual who is a creative self-starter with strong problem-solving ability and initiative who will provide technical expertise to help spearhead the company’s growing initiative to produce high performance, synthetic fiber ropes. This individual will also serve as a focal point for product design, production, testing, and technical sales support for rope products in accordance with the company’s market diversification and growth ambitions.

4. Commission new and oversee maintenance of existing applicable equipment SOPs and work in conjunction with the Training department to ensure proper training of applicable personnel.

If you have a B.S. in Mechanical Engineering or a related field and a minimum of five years industrial experience in wire and/or synthetic fiber rope design, please send resume and cover letter to: tderugeriis@fiber-line.com for consideration.

From our current headquarters in Saco, ME and Salisbury, NC, Yale employees unite around a common passion for solving problems by constantly pushing the boundaries of cordage technology. Yale is a company with passion, where quality is part of the culture and integrity drives our sales. If you’re a sharp and enthusiastic sales professional who thrives on solving problems and has a gift for building genuine relationships, we’d love to meet with you… and if you’re already a rope aficionado, even better. Visit our website, yalecordage.com for a complete list of openings and job descriptions.

Position Description: Performs sales function for new and existing accounts aimed at Industrial applications, including crane services and/or construction for wire rope and hardware. Also, delivers high quality and efficient customer service by utilizing knowledge of company products and programs.

Established and growing company in the lifting product industry located in Southern California is seeking an inside sales representative to play a key role in growing our new product line that has positioned us for tremendous growth opportunities. Industry experience preferred. Email craig@usrigging.com.

We are seeking Inside Sales Representatives for the Memphis, TN area. We offer a competitive base salary and commission program. Our excellent benefits package includes medical, dental, life, disability, paid vacation, & 401K. Please visit company website: www.houwire.com .

College degree preferred - Industry knowledge a must. Send resume in confidence to: marketing@southernwire.com or Fax# 662-893-4732. *No calls please*.

Muncy Industries, LLC, has been providing quality wire rope fittings, lifting hardware, and machines for over 60 years. Originally based out of Pennsylvania, we have recently opened a second location in Lafayette, Louisiana. Muncy Industries is seeking an individual with experience in the wire rope industry to help lead the sales team in our Louisiana location.

We offer competitive wages alongside an excellent benefits package including 100% medical, life, disability, and 401K. Contact us via e-mail: pwhite@muncyindustries.com or fax: 570-649-5850.

Marine industrial rigging shop looking for CDL driver and rigger experienced only must be willing to work in labor intense environment. Mechanically inclined. Contact John at 508-993-0070.

90+ year family owned business is looking for an experienced inside Wire Rope representative, to replace retiring veteran salesman. Candidates must be reliable, honest, strong work ethic, and demonstrate good communication skills. Our company provides excellent compensation and benefits to our team members, including Paid vacation, holiday, and sick leave, 401K Retirement plan with matching, excellent insurance benefits - Medical, Dental, Vision, RX, Short Term Disability, Life Insurance. M-F. office hours. Drug free workplace.

Please reply to: Attention: Cherise, Rasmussen Wire Rope and Rigging Co. Inc. 415 south Cloverdale Street, P.O. Box 81206 Seattle, WA 98108, Phone: 206-762-3700, Fax: 206-762-5003, e-mail: Cherisem@rasmussenco.com.

Texas Wire Rope Company expanding inside sales department. Individuals must have a strong technical, mechanical and basic mathematical aptitude, including basic computer knowledge. Selected candidates must be quality conscious and able to handle multiple tasks. Previous experience in the industrial supply market is necessary. We offer a drug-free, results-oriented work environment with excellent wages and advancement opportunities. Resumes received confidentially at wremployment@gmail.com.

Looking for sales professional. Comprehensive understanding of wire rope, chain, nylon, and fall protection preferred. Sales experience required. Competitive salary plus commission. Benefit package included. E-mail resumes to rpotter@horizoncableinc.com.

Established wire rope distributor in North America is expanding into crane/container rope and fabrication. We are looking for an experienced individual that can assist in formulating a marketing and business plan. This position will eventually evolve to a sales manager or general manager. Fax your resume in strict confidence to 330-452-2331 attention Kris Lee or e-mail to klee@afdindustries.com.

Philadelphia, PA Wire Rope & Fabrication shop has inside customer sales/service position. Experience in rigging or crane industries a plus. Contact us via e-mail: hjs_ess@hotmail.com or fax: 610-687-0912.