wire rope anti vibration mounts brands

To ensure safe and continuous operation, or for instance flawless and safe transport of (highly) sensitive equipment, adequate shock and vibration ...

We stock a range of Anti Vibration Mounts as displayed below, however in most cases we are able to supply custom material combinations to meet your ...

Metal cushions are mouldings made from a wire mesh set with elastic properties which are used on their own or in combination with fittings. They optimise oscillation isolation and reduce ...

ROSTA anti-vibration mounts type AWI are intended for the absorption of medium and low frequency vibrations. The AWI elements are used in pairs (type R and L) in most ...

Cushyfoot mountings have two rubber elements, used in shear and compression, to provide excellent stiffness characteristics for the isolation of a wide range of vibration ...

These mounts offer a low profile, easy to install design with an integral fail-safe device to provide shock and failure protection for mobile, marine or seismic stationary application and for applications ...

... rubber as standard but other compounds are available on request. Stainless steel metal parts are also available on request for substantial volume orders.

... CAVOFLEX is used to isolate vibrations - whether they are created or received by suspended equipment or as shock absorbing mounts due to its high damping capacity and deflection capacity.

Look to Enidine for high performance Wire Rope Isolators and Compact Wire Rope Isolators. The wire rope isolators have stainless steel cable and RoHS compliant aluminum retaining bars, which provides excellent vibration isolation. The isolators are corrosion resistant, which makes them environmentally stable and high-performance in a variety of applications. The isolators are completely unaffected by oil, chemicals, abrasives, ozone, and temperature extremes.

The compact wire rope isolator is smaller than a traditional wire rope and can absorb shock and vibration in small spaces. Single point mounting offers flexibility for integration into existing products.

Both compact wire rope isolators and wire rope isolators can be used on galley components where motors and fans produce vibrations onto surrounding structures. They can also be used to control vibration and thermal expansion.

A wire rope isolator is a very high performance shock absorber and vibration isolator that can used in endless applications. Wire rope isolators are very useful vibration dampers because they maintain excellent vibration isolation performance under maximum shock in severe environmental conditions such as chemical pollution or extreme temperatures. They have a long life span and can adapt to elastic displacement in all dimensions, allowing multi-directional vibration isolation and they can be installed in many different ways.

There is elastic support for heavy duty machinery such as generators and vibration isolation for delicate applications such as precision instruments, transportation of missiles and satellites, processors, communication units, protection for navigation and launching systems as well as large scale construction. The working temperature for wire rope isolators is -75°C－+175°C, up to +370°C and each wire rope isolator comes with softened non-linear stiffness. The maximum dynamic displacement is over 70 percent of the space the mount takes up, the dynamic stiffness decreases when the displacement increases.

Welcome to Advanced Antivibration Components (AAC). We are proud to provide the most comprehensive selection of shock, vibration and noise isolation mounts including Leaf Springs, Air Springs, Wire Rope Isolators, Leveling Foot Mounts, Bumpers, HVAC Hangers, Pads and more.

Our R&D work on GG Series All-Metal Wire Cable Vibration Isolator started in year 1983. In 1990, the product was listed as one of top national R&D achievements.

On top of the R&D work, we also took the leadership in making several military standard for electronic and marine industry, i.e., The General Specifications For All-Metal Wire Cable Vibration Isolator (SJ20593-96) and Specification For Wire-Cable Vibration Isolator Of Ships (GJB6412-2008),Which was published on 1st Octoboer.2008.

This product can maintain good vibration isolation performance under maximum safe shock (including earthquake). It can work in all kinds of adverse working environment classified by national as well as international military standard. It comes with long life span and can adapt to displacement in all dimensions. Various installation methods can be adopted.

This product can maintain good vibration isolation performance under maximum safe shock. It can work in all kinds of adverse working environment defined by national as well as international military standard.

Isolation Dynamics Corp. offers the very best vibration engineering solutions like our mechanically fastened wire rope isolators and isolation assemblies for a variety of applications – including architectural foundations, oil pumps, compressors, and rugged naval electronics enclosures. Learn more about our IDC isolators below!

The adverse effects of vibration, shock and noise disturbances range from simple annoyances to shortened equipment life, and can negatively affect performance, reliability, comfort and safety of your equipment. Our customizable portfolio of elastomeric mounts and bushings provide simple, reliable and cost-effective solutions to isolate vibration and shock, accommodate motion, and decrease noise.

Vibration isolators, properly applied, will improve your products.  They will operate more smoothly and quietly, and they will be less disturbing to surrounding equipment and personnel, less susceptible to damage and less expensive to make.  Elastomeric vibration isolators provide cost-effective solutions to problems involving vibration, shock and structural noise control.

Our anti vibration mounts are manufactured to the highest standards with superior materials to extend the life of your equipment. If you need a replacement mount or custom isolator for a specific application, we offer many solutions to reduce vibration, shock and noise. For help sizing a mount, our engineers are available to assist you.

The theory and concepts for elastomeric vibration isolators are relatively straightforward. A great many of the applications are uncomplicated, and a non-specialist can handle them directly. However, some vibration and shock control problems are quite complex, making component selection and design complicated. These more complex applications require the involvement of specialist in order to arrive at suitable recommendations and Hutchinson has a technical staff available to assist you. Learn More.

Vibration isolation mounts protect machinery by reducing the amplitude and frequency of vibration energy. Applications such as large motors and industrial machines generate powerful vibrations and excessive noise when active. This vibration energy can be disruptive in a work place, or cause quality or reliability issues with nearby equipment

Vibration damping mounts are commonly made with an elastomer such as natural rubber, neoprene, silicone, or EPDM, which is then bonded to metal. We do sometimes use wire mesh, which also acts as a spring for vibration and shock isolation.  Using vibration and shock mounts typically improves the service life of the equipment and improves the environment around the equipment.

Marine engine mounts are anti vibration mounts with fail-safe protection that are used in both mobile and stationary applications from diesel generators to industrial engines. Cylindrical mounts also called bobbin mounts are used in lightweight applications for shock and vibration reduction. Stationary machine mounts including: sandwich bar mounts, rubber bumper mounts and low frequency ring mounts provide shock absorption and isolate low frequency vibrations in all planes. Cone and shear mounts including: flex bolt sandwich mounts, interleaf mounts, v shaped generator mounts and motor mounts isolate vibrations in many different applications. Center bonded mounts including one piece, two piece and three piece mounts are used as rubber vibration isolators and can provide flexible suspension systems for equipment. Electrical panel mounts which have built in fail safe protection are used in applications such as electrical cabinets and enclosures.

Stainless steel leveling feet are used in hygienic leveling foot applications in the food, drug and medical industries. Our heavy duty machine leveling feet including anti vibration leveling feet increase stability for machines and limit tipping, vibration, wear and noise. Pipe hanger mounts hang HVAC equipment, machinery, piping and speakers from ceilings while isolating noise, shocks and vibrations. Wire rope mounts made with stainless steel wire rope cable combine a high level of durability with shock and vibration isolation. Our fully bonded bushing mounts come with the rubber bonded to metal and can be made in many sizes.

Typical applications for Barrymounts are: Pumps, Hoppers, Roll Mills, Cameras, CNC Machinery, Military Equipment, Washing Machines, Industrial Boat Engines, Small Electric Motors, HVAC Systems, Vibrating Tables, Aviation Equipment, Compressors, Transformers, Shipping Containers, Defense Equipment, Marine Propulsion Engines, and Electronic control modules.

Vibration mounts are used to support heavy mechanical or industrial equipment, and to isolate and absorb vibrations which result from the running of the machines or equipment. Continuous vibration takes its toll on parts and components, resulting in equipment malfunction or faulty product manufacturing. The noise caused as a result of some vibrations can also create an unpleasant working environment and may be hazardous to worker safety.

Shock absorbers and vibration control parts are used to prevent kinetic energy and motion from flowing through two connecting surfaces, thereby reducing the effects of vibration and the potential for resulting noise. Furthermore, sensitive equipment and control panels, as well as precision machines can be protected from damage or irregularities that may occur from exposure to powerful vibrations by the use of mounts or another energy absorption device such as rubber bumpers.

Vibration mounts typically consist of two parts: the isolator and the fasteners. The fasteners are metal studs used to attach the mount to its fixed surface and to the piece of equipment which it is to control the vibration for. The isolator is the vibration absorbing material that surrounds the fasteners. This is typically made from a mix of polymers, such as rubber and plastic. Vibration mounts can be plate mounts, seismic mounts, stud mounts, cylindrical mounts, ring mounts and more, depending on the intended applications.

Industries as varied as power plants, laundry facilities, food processing and air conditioning all use vibration mounts in certain applications in order to achieve greater output and performance from the machines, reduced maintenance and repair costs and a longer operating life. Vehicles, generators, pumps and centrifuges, fans, marine equipment, air compressors and most rotating industrial equipment all use various forms of vibration mounts or vibration absorbers. They are typically easy to manufacture and relatively cheap in terms of benefits realized from their use.

Rubber is a durable material and so provides a low maintenance option for vibration control. Stock items can be used for most general applications; however, custom specifications are able to be met by many manufacturers in terms of size, absorption capabilities and mounting configurations. Choosing a mounting type is based on application and needed load bearing range. For low frequency disturbances such as in fridges or air conditioners, a spring mount can adequately meet the vibration control needs. For heavier-duty applications, a seismic mount or a stud mount might be more appropriate.