wire rope bolt ends pricelist

Wire rope clips are widely used for making end terminations. Clips are available in two basic designs; the U-Bolt and fist grip. The efficiency of both types is the same.

When using U-Bolt clips, extreme care must be exercised to make certain that they are attached correctly; Incorrect installation can reduce the working load limit by 40%. Below are general guidelines for installing wire rope clips.

The saddle shall be placed on the live end of the wire rope, with the U-bolt on the dead-end side—Remember the well-known saying: “Never saddle a dead horse.” Use at least two or three wire rope clips to secure the ends properly to the length of the rope, and tighten nuts evenly one by one until reaching the recommended torque.

Step 1. Turn back a specified amount of rope from the thimble or loop. The first clip must be placed one bridge width from the turned back rope tailor dead end of the rope, Apply U-Bolt over dead end of wire rope – live end rests in the saddle (Never saddle a dead horse!) Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.

Step 3. When three or more clips are required, space additional clips equally between the first two – take up rope slack – tighten nuts on each U-Bolt evenly, alternating from one nut to the other until reaching recommended torque.

In accordance with good rigging and maintenance practices, the wire rope end termination should be inspected periodically for wear, abuse, and general adequacy. Periodically re-tightening of the nuts must be done at 10.000 cycles (heavy usage), 20.000 e.g. every 3 months, 6 months, annually.

Malleable clips are to be used for making eye termination assemblies only with the right regular lay wire rope and only for light-duty uses with small applied loads, such as handrails, fencing, guard rails, etc.

If you have any wire rope clips questions, you can contact us by email at info@hilifting.com. We will be glad to share with you more useful information.

Order on-line Order on-line www.stalok.com 365 DAYS A YEAR Order by phone Order by phone 01206 390777 Monday – Friday 8.30am to 5.00pm (UK Time) Order by email Order by email sales@stalok.com About us... UK based Sta-Lok Terminals is the global market leader in the design, manufacture and supply of high quality ttings for stainless steel wire rope and rod systems for marine and architectural applications. Customers, resellers and distributors worldwide choose us because we are trusted experts and have over 40 years of experience in precision engineered manufacturing. We also pride ourselves...

SWAGE TERMINALS SWAGE EYE STEMBALL SWAGE GUARD RAIL SWAGE FORK WELDED SWAGE FORK STEMBALL CUPS SWAGE EYE (Narrow Style) SHORT SWAGE STUD TO ORDER STA-LOK TERMINALS: WITH 7 STRAND WEDGES USE PREFIX 7 i.e. 733 = STA-LOK EYE FOR 7 STRAND FOR DYFORM WIRE USE PREFIX D .ie. D 033 = STA-LOK EYE FOR DYFORM WIRE ALL STA-LOK TERMINALS ARE SUPPLIED WITH 1 x 19 WEDGES UNLESS SPECIFIED

INSULATORS INSULATOR 1 X 19 TERMINAL/TERMINAL INSULATOR TERMINAL/EYE INSULATOR BODY (part only) INSULATOR SWAGE/SWAGE INSULATOR SWAGE/FORK INSULATOR SWAGE/EYE INSULATOR SWAGE END (part only) INSULATOR ADAPTOR SCREW TO ORDER STA-LOK TERMINALS: WITH 7 STRAND WEDGES USE PREFIX 7 i.e. 733 = STA-LOK EYE FOR 7 STRAND WIRE FOR DYFORM WIRE USE PREFIX D i.e. D 033 = STA-LOK EYE FOR DYFORM WIRE ALL STA-LOK TERMINALS ARE SUPPLIED WITH 1 x 19 WEDGES UNLESS SPECIFIED

ACCESSORIES STA-LOK WEDGE 7 STRAND STA-LOK WEDGE DYFORM STA-LOK FORMER STAINLESS STEEL SPLIT RINGS SPLIT PINS TO ORDER STA-LOK TERMINALS: WITH 7 STRAND WEDGES USE PREFIX 7 i.e. 733 = STA-LOK EYE FOR 7 STRAND WIRE FOR DYFORM WIRE USE PREFIX D i.e. D 033 = STA-LOK EYE FOR DYFORM WIRE ALL STA-LOK TERMINALS ARE SUPPLIED WITH 1 x 19 WEDGES UNLESS SPECIFIED

COPPER FERRULES Wire Diameter IWRC Fibre Core COPPER FERRULES BRITISH STANDARD Wire Diameter Reference IWRC Fibre Core Price £ IWRC = INTERNAL WIRE ROPE CORE STAINLESS STEEL TOGGLE FORK/EYE STAINLESS STEEL THIMBLE Reference Wire Price £

GUARD RAIL FITTINGS GUARD RAIL EYE INTERLINKED METRIC THREAD GUARD RAIL EYE INTERLINKED UNF THREAD GUARD RAIL EYE SINGLE METRIC THREAD STA-LOK TENSION FORK SINGLE GUARD RAIL EYE UNF THREAD PELICAN HOOK UNF THREAD PELICAN HOOK WITH STA-LOK STUD UNF THREAD PELICAN HOOK WITH SWAGE STUD UNF THREAD PELICAN HOOK METRIC THREAD PELICAN HOOK WITH SWAGE STUD METRIC THREAD PELICAN HOOK WITH STA-LOK STUD METRIC THREAD GUARD RAIL ADJUSTER FORK & SWAGE GUARD RAIL ADJUSTER FORK & STA-LOK GUARD RAIL ADJUSTER FORK & FORK GUARD RAIL ADJUSTER FORK & BLANK EYE BOLT includes Nut and Washer

14 STA-LOK TERMINAL FITTING INSTRUCTIONS STEP 1 Cut wire rope and slide socket component over wire. Tip: if using the hacksaw, wind tape around wire and saw through tape. Wind tape around wire approx. 12” (300mm) from end. This will prevent the socket from sliding down the wire. STEP 5 Final assembly. Ensure former component sits in bottom of end tting. Screw socket assembley into end tting and tighten with spanners. The assembly is now complete. Tip: Undue force is not required to terminate the wire. Fitting instructions are supplied with each terminal. STEP 2 Slide wedge component over...

Industrial Wire Rope Fittings, SS Wire Rope Fittings, Wire Rope Cable End Fittings, Galvanised Wire Rope Fittings, Wire Rope Clips Provider & Exporter

Multinox Inc is the leading Manufacturer and Supplier of. You can use our Industrial Wire Rope Fittings for safely rigging your equipment to a support. The Wire rope fittings processed by us is used extensively in the marine, architectural, yacht ringing and other structural applications. The Stainless Steel Wire Rope manufactured by us is our prime best-sellers throughout the global market. The superior grade raw materials used in the manufacturing process by us result in the exceptional holding strength and lifting strength of wire and cable ropes. OurSS Wire Rope Fittingsare portable and lightweight for optimal usage by our customers worldwide.

We manufacture varieties of Wire Rope fittings that are pull-tested and proof-tested. There are numerous options available in the size, shape and further customizations of the products belonging to our catalog of Wire Rope Fittings. The Wire Rope Cable End Fittings provides nominal breakage strength and is best-suited for the aircraft cable fittings. However, ourGalvanised Wire Rope Fittingscan be crimped into many different shapes, like round, hex, square etc.

These Wire Rope Clips help in securing wire rope ends on turning back from a loop. They have a wide range of applications in the architectural and marine applications. We manufacture Wire Rope Fittings with extra threading and ultimately finished based on the requirements of our customers. The highly economical pricing of our products and affordability draws our customers towards us daily. TheSingle Wire Rope Fittingmanufactured by us is rightfully exercised in lifting lightweight air packed goods or equipment.