wire rope buckle manufacturer

Wire Rope AccessoriesWe are a leading Manufacturer of turnbuckles, ss turn buckles, turn buckles, staining screws, u clamp and d shackle from Ghaziabad, India.

Value Brand Turnbuckles that are manufactured by us are in line with the defined industry standards. Primarily used to meet the requirements of various end terminal fittings of the chain slings, these wire rope accessories are high in demand in the global markets. These products are also used for tensional and straight in line pull.

We offer our customers Turn Buckles that are fabricated by our professionals using finest quality raw materials that are procured from the reliable market vendors. Offered to our customers in different shapes and sizes, these are sold by us at industry leading prices.

Turn buckle assembly combinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw & Jaw and Eye.End fittings are Quenched and Tempered, bodies heat treated by normalizing.Crosby"s Quenched and Tempered end fittings are normalized bodies have enhanced impact properties for greater toughness at all temperatures.Hot Dip galvanized.Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads.Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4"through 2-1/2", a shackle one size smaller can be reeved through eye.

Forged jaw ends are fitted with bolts and nuts on sizes 1/4" - 5/8", and pins and cotter on sizes 3/4" - 2-3/4".TURN BUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Lock Nuts available for all sizes.Typical hardness levels, Tensile Strengths and Ductility Properties are available for all sizes.Turnbuckles can be furnished proof tested or magnaflux inspected with certificates if requested at time of order.Crosby products meet or exceed all the requirements of ASME B30.26including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability,not addressed by ASME B30.26.

forged eye bolts, Crosby screw pin shackles, cable shackle, ratchet load binder, neck shackle, shackle dimensions, G 209, G 2130, IPU 10, IPU 10s, rope wire, turn buckle fastener, wire rope clips, stainless steel wire, wire cable, stainless wire rope, steel rope, rope pulleys, rope clamps, steel wire rope, turn buckle hardware, stainless steel turn buckles, stainless steel eye bolt, eye bolt manufacturers, stainless steel wire rope, wire rope fittings, steel turn buckle, turn buckle assemblies, galvanized turn buckles, jaw turn buckle, heavy duty turn buckle, wire rope suppliers, Crosby turn buckles, lifting eye bolt, small turn buckle, Galvanized wire rope, eye bolt suppliers, wire, hooks, steel wire, lifting tools & tackles, turn buckle catalogue, forged turn buckle, rigging equipment, turn buckle design, wire rope assemblies, wire rope rigging, wire rope manufacturers, wire rope industries, turn buckle bolt, turn buckle nut, wire rope thimbles, eye turn buckles, , marine turn buckle, wire rope accessories, wire rope sheaves, , wire rope pulley, turn buckle suppliers

Turnbuckles are used for adjusting tension in ropes, cables, tie rods and other tensioning systems, as well as for pulling together and pushing apart anchor points. Heavy duty rigging turnbuckles consist of two threaded bolts, each screwed into the ends of a metal frame. One side is left-hand threaded and the other is right-hand threaded, so riggers can turn the metal frame to push apart and pull together the threaded bolts. These threaded bolts come with a wide variety of end fittings and attachments including jaws, eyes, clevises, hooks and many more. All cable turnbuckles and turnbuckle hardware feature UNC threads so you can change out end fittings and bodies as needed.

Whether you are using a small turnbuckle or a large turnbuckle, they should be used for straight or inline pulling, and tensioning only. At Tri-State Rigging Equipment we pride ourselves on providing our customers with only the highest quality industrial turnbuckles and turnbuckle hardware, from only the most reputable manufacturers. If you are unable to find what you are looking for, or if you don’t know exactly what you need, call or email our sales team to speak with a rigging product specialist.

Turnbuckles are very popular in the marine rigging industry, where corrosion resistance is often the name of the game. Stainless steel offers the most corrosion resistance but can be expensive. On the other hand, galvanized steel is more economical, but less corrosion resistant. Brass turnbuckles are the ideal solution for applications that require explosion and spark resistance. Aluminum turnbuckles lead the industry in light weight and low-cost design.

Our heavy-duty stainless-steel turnbuckles can also be equipped with an enclosure, called a pipe, covering the threads and body of the cable turnbuckle. Sometimes referred to as a closed body turnbuckle, this option is very popular in the architecture industry where cosmetics are a top priority.

The most basic turnbuckle fitting, threaded rod turnbuckle fittings are simply a steel rod with standard threads on the end that can be easily connected to a post or other mounting surface.

An eye is a solid loop end, mainly used with wire rope. The solid construction of turnbuckle eyes ensures that there is no way for the wire rope to slip through. Elongated eyes are not only good for reducing stress on the turnbuckle hardware, but they also make it easier to connect to marine rigging equipment.

When you have a fixed anchor point or the anchor point must be secured from slipping off the fitting, fork or jaw turnbuckles are a perfect solution. A fork or jaw is a wishbone shaped anchor point secured by a nut and bolt, or pin and cotter.

Hooks offer the quickest attachment and release when it comes to turnbuckle hardware. Hooks are very versatile and can be an ideal option for a wide variety of turnbuckle applications. A cable turnbuckle with two hook fittings, called a hook and hook turnbuckle, can have hooks that open the same way or hooks that open opposite ways depending on what you need for your specific rigging application.

A deck toggle is a mounting bracket around a “T” shaped bar. This allows the turnbuckle to be securely mounted on one end and able to be rotated 180° parallel with the mounting bracket. Deck toggle turnbuckles are most attached to deck posts.

Drop pin turnbuckle fittings consist of a pin that can be flipped flat into the body of the threaded bolt and can also be flipped out at a 90° angle from the threaded bolt. This allows the bolt to be threaded through a hole while the pin is flipped in and then securely held in place while flipped out.

Stub end turnbuckle fittings are not used to attach to anchor points like other turnbuckle hardware, but rather, are used to separate or push objects apart.

Swage stud turnbuckle fittings are used to seamlessly connect a turnbuckle to the end of a wire rope. Swage stud turnbuckle fittings are threaded to accept wire rope wires directly into the fitting, and to be swaged for a secure attachment between the wire rope and the turnbuckle.

Rigging turnbuckle hardware and assemblies are extremely versatile and can be configured in countless combinations to fit any rigging application. Some of the most popular configurations include:

These are only a fraction of the combinations that are possible when configuring a rigging turnbuckle. Even better than the near limitless combinations of fittings, however, is the interchangeability of turnbuckle hardware. For example, to change a jaw and jaw turnbuckle into a jaw and hook turnbuckle, all you need to do is unscrew one jaw fitting and screw in a hook fitting. This top tier customizability and interchangeability is why heavy-duty industrial turnbuckles are an extremely valuable part of any rigging operation.

Tri-State Rigging Equipment is a service provider and distributor for all heavy duty industrial turnbuckles for rigging and lifting; serving clients from coast to coast, Canada, Mexico and especially focused in the states of Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.

These turnbuckles are used to create tension in cables, ropes and chains by turning the body of the buckle to take up slack. Used with rope, twine, cables and like items in tensioning systems. Suitable for marine, outdoor or general applications.

Our Hook Eye Turnbuckles are made with quality in mind. Our heavy duty turnbuckles are made with a 5:1 safety rating with a 2:1 proof load test and made of galvanized steel. Galvanized steel turnbuckles have a thick galvanized coating (zinc) which gives the turn buckle added resistant properties. For the ultimate resistance to corrosives, try our stainless steel turnbuckles and other stainless steel hardware. With a hook that has a weaker break strength than an eye or jaw, the assembly has a weaker overall strength than a jaw jaw turnbuckle or eye eye turnbuckle. The hook simply allows for a faster connection of the rigging hardware.

Eye and Eye Turnbuckles are drop forged for added strength compared to a machined or precision cast turnbuckle. The drop forged process adds strength while the Type 316 stainless steel offers the highest level of corrosion protection. The turnbuckle eyes are elongated, similar to the Galvanized Eye and Eye Turnbuckle, for less stress on the eye and for easier attachment of other hardware. Our eye turnbuckles are US type and meet dimensions of ASTM specification F1145-92 Type 1, Class H.

Eye to Eye Turnbuckles are one of the most common steel turn buckles.  Made of galvanized steel, these turnbuckles are formed to withstand the nastiest of corrosive environments. Our eye to eye turnbuckles have elongated eyes on each end for less stress on the eye and for easier connection of other rigging hardware.  The body of the turnbuckle features a reverse thread on each end to allow for tightening/loosening by simply turning the body of the turn buckle.  Meant for straight line pulls only, galvanized steel turnbuckles are a popular choice among the rigging industry and our heavy duty turnbuckles are made to impress.  Coming in a variety of sizes from small turnbuckles to large turnbuckles, these eye & eye turnbuckles meet or exceed the performance requirements of ASTM F – 1145 (formerly Federal Specification FF-T-791).

The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site. The remaining wire rope “drop” is passed through a channel in the Rize Kwik-Loc. Then, the wire rope is either wrapped around the equipment or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the equipment in place.

The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site. The remaining wire rope “drop” is passed through a channel in the Rize Kwik-Loc. Then, the wire rope is either wrapped around the equipment or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the equipment in place.