wire rope flemish eye in stock

© 2003-2021 PROlift. All materials – including but not limited to text, images, graphics, multimedia are the copyright-protected property of Forum Industry or, as applicable, its commercial partners.

When looking for strength and durability on that next big rigging job, look no further than our array of HSI Wire Rope Slings. A wide-variety of sizes are available whether working on a small-load lift or preparing to maneuver a massively heavy element. Our slings are there to solve your hoisting, lifting and towing problems.

The wide offering of Single Leg Wire Rope Slings will surely meet your rigging needs on the jobsite. Each eye on these slings is formed using the mechanical Flemish Eye Splice. This process allows for the most efficient use of the rope capacity with top-quality steel as the pull is directly along the centerline of the rope and eye.

There are at least six prominent varieties of lifting slings that are presently widely used across many sectors, including single-use one-way slings, wire rope slings, round slings, fiber rope slings, chain slings, and web slings, sometimes also known as webbing slings. Check out the wholesale flemish eye wire rope sling options on Alibaba.com; you should be able to find the bulk of them at a great wholesale price here!

Before you search for a flemish eye wire rope sling below, let"s go over some of the crucial aspects to consider when choosing lifting slings. First and foremost, you must evaluate the overall weight of your load in relation to the load limit of the sling type you have decided on. Secondly, consider how frequently you will need to lift the load. In order to achieve correct load balance, you must also consider optimal sling configuration while picking the appropriate sling for your load. Another essential element to consider is the environment in which your loads are stored or lifted. Humidity, temperature, and the presence of corrosive substances may greatly affect the durability and quality of your chosen slings too.

The Flemish eye without the sleeves has already an efficiency of 75% of the breaking load of the rope; with the sleeve this termination has the same breaking load as the rope, for thick ropes down to 90% of the rope’s breaking load. Superloop with Flemish eye can be used on ropes up to 114 mm in diameter. At our workshop we can make Superloop with a diameter up to 68 mm.

Flemish Eye Carbon Steel Sleeves are recommended for use on 6 x 19 or 6 x 37 IPS or XIP, EIP, RRL, FC, or IWRC wire rope. Proper swaging practices are the sling manufacturer’s responsibility. A color change will not indicate proper swaging. Before using sleeves with other type lay, construction or grade of wire rope, it is recommended that the termination be tested to prove the adequacy of the assembly for its intended use. Proper swaging practices are the sling manufacturers responsibility. A color change will not indicate proper swaging.

M-sling Standard Eye Wire Rope Slings are popular at construction sites because of their low cost and resistance to abrasion in rugged work environments. These Mechanical Spliced Eye to Eye Wire Rope slings are the most economical wire rope sling designed for general purpose applications.

The eyes are formed using the Flemish Eye Splice and the ends are secured by swaging a steel sleeve over the ends of the strands. They can be used in an array of hitches, configurations and applications.

It is an eye termination where the rope end is split in two parts of three and four strands each, which are laid back together again in the opposite direction, to form a soft eye, which can be provided on demand with various types of thimbles.

Swaging the Flemish Eye with its heavy conical steel ferrule offers the best solution against abrasion and distortion of the termination. Combined with its steel core rope construction and steel termination, Flemish Eye manufactured slings and steel wire ropes can be set into service in a potential highly temperatured environment.

Tway Lifting Products manufactures wire rope slings, spreaders and assemblies from ¼”-2”. We stock fittings and components that allow us to produce a full range of wire rope slings multi-leg assemblies, crane boom support cables, and bridge crane hoist ropes.

Our in-house proof testing center is used to verify the integrity of the products we manufacture. Every wire rope sling or bridle that we produce includes an OSHA appropriate DuraTag stating: size, working load limit, number of legs, and angle chart graphics. Our assemblies are manufactured to the highest standards by trained professionals. All of our wire rope slings are made from USA made products. The most common wire rope sling type is the eye and eye single leg.

Eyes are formed using the flemish eye splice. Ends are secured by pressing a metal sleeve over the ends of the strands of the splice. Pull is directly along the centerline of rope and eye. Gives most efficient use of rope capacity and is economical. Single-Part Body Mechanically Spliced Slings - Swaging Provides Positive Grip. Flemish Eye Splice, In the standard flemish eye mechanical splice, rope is separated into two parts—3 adjacent strands, and 3 adjacent strands and core. These two parts are then re-laid back in opposite directions to form an eye, and ends are secured with a swaged metal sleeve.