wire rope lifting loop in stock

Most economical lifting units for this system. Manufactured from flexible wire rope and tagged with a color code to match the capacity of the anchors. For tension only - limited to 30 degrees from vertical. Galvanized cable loop with mill finished threaded stud.

Stock up on every variety of steel wire rods at the Alibaba metalworking store. Our listings feature wholesale steel rods from a network of dependable Chinese manufacturing partners. If you need to source steel rods for construction projects, you"ll find products that are robust and durable. And if you need welding rods, they are easy to find via our search engine. Track down the wire rope lifting loop you need at affordable prices at Alibaba.com.

What can you do with the steel wire rods available from Alibaba"s wholesale store? One common use for steel rods is in the welding sector. Steel works well as a welding rod material thanks to its high ductility, meaning that welds are relatively strong and long-lasting. Choose a low carbon rod and you"ll be all set for successful welds in industrial settings and workshops alike. However, steel wire also has applications beyond welding. You can use it as wiring in electronic circuits and power distribution systems and it works especially well in high temperature settings as armored cabling. Find the ideal wire rope lifting loop for every industrial use at Alibaba.com.

Steel wire rods also have applications in everyday life. For example, you can use coils of steel wire to construct fences and barriers both inside and outside homes. It"s a common material in agricultural businesses thanks to its toughness and resistance to oxidation. Use it to create reinforcement cages, enclosures for equipment, or add it to concrete to add extra strength where it really matters. From welding to concrete reinforcement, wire rope lifting loop will always find a use. And whether you need small batches or huge bulk orders, our metallic materials catalog is the ideal place to look.

3200 lbs ALP Steel Core Lift Loops provide a secure, economical option for face lifting precast applications. Made of galvanized wire rope and securely swaged together.

2400 lbs ALP Steel Core Lift Loops provide a secure, economical option for face lifting precast applications. Made of galvanized wire rope and securely swaged together.

Lifting loops and sockets are interrelated lifting components used in pre-cast concrete structures, manufacturing and building industries. They aid the safe transportation and placement of structural components.

Designed for longevity, our lifting loops are manufactured from wire ropes clinched firmly into an externally threaded (standard ISO/DIN) metric or metric round form thread steel ferrule. On application this mates with permanently inserted steel socket of the same thread form and size.

The recommended Working Load Limit (WLL) is typically based on a 5 to 1 factor of safety of the wire rope minimum break loading, as per BS1290:1983. By arrangement a 6 to 1 factor of safety can be offered on metric round form (Rd) type loops.

Note: Lifting loop and socket must be carefully matched to the correct thread form and size. (M) metric ISO threads are not compatible on thread form with (Rd) metric round form threads.

If you are in any doubt about any aspect of a lifting operation, contact us. Our specialist team is always available to provide guidance on wire rope lifting systems.

Use the correct load distribution basins (available from Slingco) for angles over 45 degrees. Ensure full thread length of the lifting loop is engaged into the socket prior to the start of lifting. Use a suitable spreader beam when multi-point lifting is required to an angle greater than 45 degrees.

Allow for reduced ‘safe working load’ capacity as the angle of pull increases. Ensure the cane hook is compatible with the loop ‘eye’ size. Do not use undue undersize or oversized hooks or pins as this can reduce the ‘safe working load’ and life of the loop.

The advantages of these modern lifting devices in the pre-cast concrete construction and building industries is widely accepted. Information on application uses and safe working practices is readily available from building equipment agents and stockists in a wide range of languages.

The end user must be fully compliant with all Health & Safety regulations. The correct information must be available at the concrete factory or construction site. Lifting equipment must be employed correctly and safely utilised within its prescribed limits.

Threaded Lifting Loops are manufactured from high grade steel wire, swaged in a steel ferrule and zinc-plated for protection against corrosion. Threaded Lifting Loops are suitable for use with a corresponding size insert cast flush with the face of the unit.

Note: Before use, check that the wires are in good condition. Do not use if the wire cable is bent, crushed or kinked or if there is any loosening of the outer layer. Discard if the wire is corroded or the thread is damaged.

SMPRE™ Cast-in lifting loops set in concrete can transfer high loads and thus is the ideal solution for heavy elements. Both ends of the rope are bonded together and form a loop consisting of bright or galvanized wire ropes. A special lifting device is not required here.

The Wire Rope Lifting System is an economical lifting loop for utility type structures. It is used in either face or edge lifts applications and is "mucked" into the surface of the concrete. The galvanized wire rope is formed in a figure-8 shape, with the ends of the rope secured by a positive swaged clamp, and a steel band at approximately the midpoint to establish the proper shape. The Wire Rope Lifting System is embedded 2/3 of its length into the concrete. The hardware must be standard hook or clevis with a diameter at least twice the rope diameter. Each anchor has a color-coded tag which identifies the SWL in tension of the anchor.

The “change of mind” or 14 day “cooling off” returns policy does not apply to Non-Standard Stock Products due to safety risks associated with used materials. These items will be listed as such in the description and refers to any items which are made to order and manufactured by our company to a specification. This includes; chains assemblies (all grades), tie down chains, chain slings, lifting chain assemblies, custom webbing slings, along with any product which was specifically designed for an application. These items are not covered under EU consumer rights directive legislation as they are customised and likely to deteriorate/expire quickly with use. Please note that items which are Standard Stock Products but are shrink wrapped for protection can NOT be returned under 14 day cooling off period if protective shrink wrap which has been applied during production is opened or damaged as this renders the item used. This applies to Web slings and Roundslings.

Our normal return policy does not apply to any “Special Order” purchases. “Special Order” purchases are not returnable for refund or for credit of any kind. Payment of Special-order items will be required in full before the order can be processed. All special-order items will be processed in the most efficient and timely manner possible but as the order is “special” or “one-off” Lifting Equipment Sales Ltd trading as LiftingEquipment.ie is not responsible for delays beyond our control and at the time of ordering a special order item, it is the customer"s responsibility to obtain an estimated (approximate) time of arrival. No cancellations will be honored and refusal of a special-order shipment does not constitute right to a refund.

SSTE offer heavy duty Lifting Loop. The Lifting must be screwed into the socket completely. You may need to clean the concrete residue in the thread of the lifting anchor by means of thread cleaner.