wire rope lifting loop free sample

Lifting loops and sockets are interrelated lifting components used in pre-cast concrete structures, manufacturing and building industries. They aid the safe transportation and placement of structural components.

Designed for longevity, our lifting loops are manufactured from wire ropes clinched firmly into an externally threaded (standard ISO/DIN) metric or metric round form thread steel ferrule. On application this mates with permanently inserted steel socket of the same thread form and size.

The recommended Working Load Limit (WLL) is typically based on a 5 to 1 factor of safety of the wire rope minimum break loading, as per BS1290:1983. By arrangement a 6 to 1 factor of safety can be offered on metric round form (Rd) type loops.

Note: Lifting loop and socket must be carefully matched to the correct thread form and size. (M) metric ISO threads are not compatible on thread form with (Rd) metric round form threads.

If you are in any doubt about any aspect of a lifting operation, contact us. Our specialist team is always available to provide guidance on wire rope lifting systems.

Use the correct load distribution basins (available from Slingco) for angles over 45 degrees. Ensure full thread length of the lifting loop is engaged into the socket prior to the start of lifting. Use a suitable spreader beam when multi-point lifting is required to an angle greater than 45 degrees.

Allow for reduced ‘safe working load’ capacity as the angle of pull increases. Ensure the cane hook is compatible with the loop ‘eye’ size. Do not use undue undersize or oversized hooks or pins as this can reduce the ‘safe working load’ and life of the loop.

The advantages of these modern lifting devices in the pre-cast concrete construction and building industries is widely accepted. Information on application uses and safe working practices is readily available from building equipment agents and stockists in a wide range of languages.

The end user must be fully compliant with all Health & Safety regulations. The correct information must be available at the concrete factory or construction site. Lifting equipment must be employed correctly and safely utilised within its prescribed limits.

Threaded Lifting Loops are manufactured from high grade steel wire, swaged in a steel ferrule and zinc-plated for protection against corrosion. Threaded Lifting Loops are suitable for use with a corresponding size insert cast flush with the face of the unit.

Note: Before use, check that the wires are in good condition. Do not use if the wire cable is bent, crushed or kinked or if there is any loosening of the outer layer. Discard if the wire is corroded or the thread is damaged.

Stock up on every variety of steel wire rods at the Alibaba metalworking store. Our listings feature wholesale steel rods from a network of dependable Chinese manufacturing partners. If you need to source steel rods for construction projects, you"ll find products that are robust and durable. And if you need welding rods, they are easy to find via our search engine. Track down the wire rope lifting loop you need at affordable prices at Alibaba.com.

What can you do with the steel wire rods available from Alibaba"s wholesale store? One common use for steel rods is in the welding sector. Steel works well as a welding rod material thanks to its high ductility, meaning that welds are relatively strong and long-lasting. Choose a low carbon rod and you"ll be all set for successful welds in industrial settings and workshops alike. However, steel wire also has applications beyond welding. You can use it as wiring in electronic circuits and power distribution systems and it works especially well in high temperature settings as armored cabling. Find the ideal wire rope lifting loop for every industrial use at Alibaba.com.

Steel wire rods also have applications in everyday life. For example, you can use coils of steel wire to construct fences and barriers both inside and outside homes. It"s a common material in agricultural businesses thanks to its toughness and resistance to oxidation. Use it to create reinforcement cages, enclosures for equipment, or add it to concrete to add extra strength where it really matters. From welding to concrete reinforcement, wire rope lifting loop will always find a use. And whether you need small batches or huge bulk orders, our metallic materials catalog is the ideal place to look.

Thread lifting loops is a lifting device for lifting anchors, such as reinforcement anchors, wave anchors, and lifting sleeves. They are economical lifting loops and applicable for a lot purposes, especially construction or operation sites. They are not suitable for turning or position. Labels of loops are marked with the related