wire rope lifting loop pricelist

Stock up on every variety of steel wire rods at the Alibaba metalworking store. Our listings feature wholesale steel rods from a network of dependable Chinese manufacturing partners. If you need to source steel rods for construction projects, you"ll find products that are robust and durable. And if you need welding rods, they are easy to find via our search engine. Track down the wire rope lifting loop you need at affordable prices at Alibaba.com.

What can you do with the steel wire rods available from Alibaba"s wholesale store? One common use for steel rods is in the welding sector. Steel works well as a welding rod material thanks to its high ductility, meaning that welds are relatively strong and long-lasting. Choose a low carbon rod and you"ll be all set for successful welds in industrial settings and workshops alike. However, steel wire also has applications beyond welding. You can use it as wiring in electronic circuits and power distribution systems and it works especially well in high temperature settings as armored cabling. Find the ideal wire rope lifting loop for every industrial use at Alibaba.com.

Steel wire rods also have applications in everyday life. For example, you can use coils of steel wire to construct fences and barriers both inside and outside homes. It"s a common material in agricultural businesses thanks to its toughness and resistance to oxidation. Use it to create reinforcement cages, enclosures for equipment, or add it to concrete to add extra strength where it really matters. From welding to concrete reinforcement, wire rope lifting loop will always find a use. And whether you need small batches or huge bulk orders, our metallic materials catalog is the ideal place to look.

They are manufactured from high grade steel wire swaged onto a steel ferrule, providing a strong and reliable lifting device that can be re-used, subject to being checked for damage prior to each lift

The Wire Rope Lifting System is an economical lifting loop for utility type structures. It is used in either face or edge lifts applications and is "mucked" into the surface of the concrete. The galvanized wire rope is formed in a figure-8 shape, with the ends of the rope secured by a positive swaged clamp, and a steel band at approximately the midpoint to establish the proper shape. The Wire Rope Lifting System is embedded 2/3 of its length into the concrete. The hardware must be standard hook or clevis with a diameter at least twice the rope diameter. Each anchor has a color-coded tag which identifies the SWL in tension of the anchor.

Wire Rope Material: The lifting slings are made from independent wire rope core (IWRC) offering less stretch and resistance to crushing while maintaining sling flexibility. Wire rope slings are fabricated from extra improved plow steel (EIPS).

A low quality wire rope sling can cause injury and damage. A look-alike wire rope sling often found at lower prices is also often advertised to conform to the same safety standards (if at all). Be aware that it may refer to safety ratings in effect decades ago. So for example under the same safety standard a decade ago, a wire rope sling may be rated to 100% without proof load testing while today it may be 300% with proof load testing. Be assured that we only sell the highest quality wire rope slings and our advertised safety standards conform to the current ASME standards.

Working load limits (capacity) of the wire rope lifting slingsvary depending on the angle of use. The capacity is reduced as the angle of use declines. See drawing below how a 1,000 lbs sling capacity is reduced as the angle of use declines. The capacity of the sling is always highest at a 90 degree angle of use and smallest at an angle of 30 degrees (or less).

The wire rope sling is not quite as durable. The wire rope sling is not as flexible as chain but its greater stiffness can be an advantage if it has to be inserted through a small opening or beneath a load. However, when wrapped around a load, the wire rope sling often tends to deform permanently to the shape of the load. Wire rope suitable for slings comes in a variety of grades and constructions. In most cases looping back and securing the loop with a metal sleeve terminates the rope. This forms a loop or soft eye, the simplest form of sling end. Thimbles are used to support and protect the eye from abrasion. Wire rope is generally cheaper and lighter than chain which can be a plus, particularly for applications that require long sling lengths.

The nylon and polyester slings have the advantage of being lightweight in comparison to chain and wire rope slings. They are very flexible and relatively soft; therefore, they are suitable in applications were minimal damage to the load"s surface finish is important. The rope is made endless or terminated with an eye by means of a handmade splice. Similar to a wire rope sling, various terminal fittings are available. Without adequate protection, nylon and poly slings are susceptible to being severed when impinging on even a relatively moderate sharp edge.

Wire rope is often commonly referred to as cable; they are one in the same. Wire rope is composed of wires, strands, and a core. The basic unit is the wire, which is formed into strands. The strands are wound around the core. Various types of wire rope exist to meet a range of uses and operating conditions. These types are designated by the number of strands; the number, sizes and arrangement of the wires in each strand; and the way in which the wires and strands are wound, or laid, about each other.

Important characteristics of wire rope relate to the number and size of the outer wires. A small number of large outer wires result in better resistance to wear and corrosion. A large number of small wires result in better flexibility and resistance to fatigue.

The core acts as the axial member about which the strands are laid. Wire rope cores are made in two different forms. The one used most extensively is a wire rope of suitable size to serve as a core. It is called as independent wire rope core (IWRC). IWRC has increased tensile strength, offers less stretch, and is resistant to crushing; however, is less flexible. The other type is a wire strand core (WSC). This consists of a multiple-wire strand, and may be the same construction as the main rope strands.

Two grades of carbon steel wire are offered. The bulk of commercial wire rope lifting sling is made from improved plow steel (IPS) or extra improved plow steel (EIPS) which has a higher tensile strength.

Hand Splicing: Because no metal sleeve is required to secure the eye in the hand spliced sling, it exhibits more flexibility than mechanically splice slings of equal diameter. They have a more narrow profile and therefore can fit through tight spaces. Without benefit of a metal sleeve, lifts must be limited to applications where the wire rope sling is restrained from rotation and possible unlaying of the sling body.

Mechanical Splicing:Mechanically spliced eyes do not suffer the limitations of hand splicing, are economical, and offer the highest rated capacity of any spliced wire rope sling. This wire rope sling is fabricated by unlaying the rope body into two parts, one containing half the number of strands, the other having the remaining strands and core. The rope is unlayed far enough back to allow the eye to be formed by looping one part in one direction and the other part in the opposite direction and laying the rope back together. The strands are rolled back around the rope body and a metal sleeve is slipped over the ends and pressed (or swaged) to secure the ends to the body of the wire rope sling.

Wire Rope Material:The lifting slings are made from independent wire rope core (IWRC) offering less stretch and resistance to crushing while maintaining sling flexibility. Wire rope slings are fabricated from extra improved plow steel (EIPS).

A low quality wire rope sling can cause injury and damage. A look-alike wire rope sling often found at lower prices is also often advertised to conform to the same safety standards (if at all). Be aware that it may refer to safety ratings in effect decades ago. So for example under the same safety standard a decade ago, a wire rope sling may be rated to 100%without proof load testing while today it may be 300% withproof load testing. Be assured that we only sell the highest quality wire rope slings and our advertised safety standards conform to the current ASME standards.

Working load limits (capacity) of the wire ropelifting slingsvary depending on the angle of use. The capacity is reduced as the angle of use declines. See drawing below how a 1,000 lbs sling capacity is reduced as the angle of use declines. The capacity of the sling is always highest at a 90 degree angle of use and smallest at an angle of 30 degrees (or less).

Thewire rope slingis not quite as durable. The wire rope sling is not as flexible as chain but its greater stiffness can be an advantage if it has to be inserted through a small opening or beneath a load. However, when wrapped around a load, the wire rope sling often tends to deform permanently to the shape of the load. Wire rope suitable for slings comes in a variety of grades and constructions. In most cases looping back and securing the loop with a metal sleeve terminates the rope. This forms a loop or soft eye, the simplest form of sling end. Thimbles are used to support and protect the eye from abrasion. Wire rope is generally cheaper and lighter than chain which can be a plus, particularly for applications that require long sling lengths.

The nylon and polyester slings have the advantage of being lightweight in comparison to chain and wire rope slings. They are very flexible and relatively soft; therefore, they are suitable in applications were minimal damage to the load"s surface finish is important. The rope is made endless or terminated with an eye by means of a handmade splice. Similar to a wire rope sling, various terminal fittings are available. Without adequate protection, nylon and poly slings are susceptible to being severed when impinging on even a relatively moderate sharp edge.

Wire rope is often commonly referred to as cable; they are one in the same. Wire rope is composed of wires, strands, and a core. The basic unit is the wire, which is formed into strands. The strands are wound around the core. Various types of wire rope exist to meet a range of uses and operating conditions. These types are designated by the number of strands; the number, sizes and arrangement of the wires in each strand; and the way in which the wires and strands are wound, or laid, about each other.

Important characteristics of wire rope relate to the number and size of the outer wires. A small number of large outer wires result in better resistance to wear and corrosion. A large number of small wires result in better flexibility and resistance to fatigue.

The core acts as the axial member about which the strands are laid. Wire rope cores are made in two different forms. The one used most extensively is a wire rope of suitable size to serve as a core. It is called as independent wire rope core (IWRC). IWRC has increased tensile strength, offers less stretch, and is resistant to crushing; however, is less flexible. The other type is a wire strand core (WSC). This consists of a multiple-wire strand, and may be the same construction as the main rope strands.

Two grades of carbon steel wire are offered. The bulk of commercialwire rope lifting sling is made from improved plow steel (IPS) or extra improved plow steel (EIPS) which has a higher tensile strength.

Hand Splicing: Because no metal sleeve is required to secure the eye in the hand spliced sling, it exhibits more flexibility than mechanically splice slings of equal diameter. They have a more narrow profile and therefore can fit through tight spaces. Without benefit of a metal sleeve, lifts must be limited to applications where the wire rope sling is restrained from rotation and possible unlaying of the sling body.

Mechanical Splicing:Mechanically spliced eyes do not suffer the limitations of hand splicing, are economical, and offer the highest rated capacity of any spliced wire rope sling. This wire rope sling is fabricated by unlaying the rope body into two parts, one containing half the number of strands, the other having the remaining strands and core. The rope is unlayed far enough back to allow the eye to be formed by looping one part in one direction and the other part in the opposite direction and laying the rope back together. The strands are rolled back around the rope body and a metal sleeve is slipped over the ends and pressed (or swaged) to secure the ends to the body of the wire rope sling.

2400 lbs ALP Steel Core Lift Loops provide a secure, economical option for face lifting precast applications. Made of galvanized wire rope and securely swaged together.

3200 lbs ALP Steel Core Lift Loops provide a secure, economical option for face lifting precast applications. Made of galvanized wire rope and securely swaged together.

The “change of mind” or 14 day “cooling off” returns policy does not apply to Non-Standard Stock Products due to safety risks associated with used materials. These items will be listed as such in the description and refers to any items which are made to order and manufactured by our company to a specification. This includes; chains assemblies (all grades), tie down chains, chain slings, lifting chain assemblies, custom webbing slings, along with any product which was specifically designed for an application. These items are not covered under EU consumer rights directive legislation as they are customised and likely to deteriorate/expire quickly with use. Please note that items which are Standard Stock Products but are shrink wrapped for protection can NOT be returned under 14 day cooling off period if protective shrink wrap which has been applied during production is opened or damaged as this renders the item used. This applies to Web slings and Roundslings.

Our normal return policy does not apply to any “Special Order” purchases. “Special Order” purchases are not returnable for refund or for credit of any kind. Payment of Special-order items will be required in full before the order can be processed. All special-order items will be processed in the most efficient and timely manner possible but as the order is “special” or “one-off” Lifting Equipment Sales Ltd trading as LiftingEquipment.ie is not responsible for delays beyond our control and at the time of ordering a special order item, it is the customer"s responsibility to obtain an estimated (approximate) time of arrival. No cancellations will be honored and refusal of a special-order shipment does not constitute right to a refund.

Simen Precasthas a broad range of cast-in Loops that are taken into use for different purposes and in different industry verticals. Choose the best one of your choice, go through the details and place your order.

Depending on your choice and requirement, you can choose the best range of cast-in loops – available in a variety of models, sizes and types. At Simen Precast, we have an exclusive range of cast-in loops that include, but not limited to:

Choose the best one of your choice, go through the details, add to cart and place your order. We have a variety of cast-in loops that are easy to maintain and come with a number of added features. Go through the details, know about their features and technical specifications and place your order. We provide you with a user guide and precise information about the loops that are easy to maintain and ideal for different industry purposes.

Simen Precast has a broad range of cast-in Loops that are offered at competitive prices and in secure way after customs clearance and all other formalities of shipping. Go through the details and we ensure you will get it delivered in secure way and on time.

We also offer you customized cast-in loops. Please go through the available stock or download our brochure to check, which one is the best for you to use as per your industrial needs

We offer Wire Rope Sling that are mainly used for transporting and shifting of load.These are highly acclaimed for features like durability, hardness and tensile strength. The sling is used in construction, marine and automobile industry. The range is also customized as per specification of client.

Here at Murphy Industrial Products, Inc., we provide a wide range of wire rope chokers to help you get the job done on time. You can get ones that have fiber cores or independent wire ones. One of the advantages of choosing a wire cable sling is that it can resist damage from heat. Plus, it can be a lot stronger than a traditional rope is. Ones that have fiber cores also come with the advantage of resisting heat. However, they can also get damaged if the environment is not right.

You can choose to use wire lifting cable slings because of how strong they are. They can resist abrasions well, and they tend to last for a long time. You do not have to worry about how light or heavy your materials are when lifting them. Plus, the temperature of them will not affect the performance of the rope.

Wire rope slings are mainly for heavy duty jobs that require lifting hoisting, and/or towing and anchoring heavy loads. Wire slings can handle heat and offer superior abrasion resistance. These slings can be used in almost any condition. They offer a flexible design that will conform to just about any shape need be to secure the load.

The eye loops on our sling cable are created with a flemish splice, which is a splice where the wire cable is detached into two parts then re-laid back in the opposite direction to form the loop. The ends are then secured with a carbon steel sleeve around the splice.

Different wire rope sling builds will offer different benefits and will work better in varying conditions and applications. A good rule of thumb is the smaller number of large outer wires offers better wear and corrosion resistance, while a larger number of small wires provides a better level of flexibility and resistance to fatigue.

Many people like wire rope since they are so durable. Plus, they are useful for many applications, making them a flexible option. Are you looking for the right lifting wire rope slings for your facility? Feel free to reach out to Murphy Industrial Products, Inc. to find out more about our products. We are happy to help you decide on the right cable sling to meet your company’s needs.

The PFEIFER Lifting Keys are essential components of the thread system and are always used in combination with the corresponding PFEIFER Lifting Anchors. All lifting keys act as attachment points for lifting solid precast concrete elements. As well as the million-times proven rope eyes, the user can also choose from flared lifting loops, special lifting loops and swivel eyes. Each of these products offers different benefits for the user. With our extensive range of lifting keys, we can offer an economical variant for every situation.

They are manufactured from high grade steel wire swaged onto a steel ferrule, providing a strong and reliable lifting device that can be re-used, subject to being checked for damage prior to each lift