wire rope load cell supplier

Designed to measure tension force in crane and hoist applications, our IP67 alloy steel wire rope load cell is an accurate and effective force measurement solution, even in harsh conditions.

A wide variety of wire rope tension load cell options are available to you, such as resistance sensor, optical sensor.You can also choose from pressure sensor, wire rope tension load cell,As well as from standard, {2}, and {3}. And whether wire rope tension load cell is industrial automation, {2}, or {3}.

The Cablecon 528L digital load cell indicating system is used to improve the accuracy and production of existing Prooftest machines (analog pressure gages) and can also be installed on New Prooftest machines.  The Cablecon 528L Consists of a digital readout and custom designed standard or heavy-duty load cells.  The Cablecon 528L system will insure the Prooftest machine to pass ASTM E4 force calibration/verification standard.

The Cablecon 528L also can be used with our proven CLT computer software.  The CLT-510 is a special computer program that will produce a test certificate with all customer and product information.  Along with the “Peak Load” reading, time duration and other pertinent test information.  During the actual test the operator can view the current test in real time from the load vs. time graph.  The test can be automatically stored and printed.  And old tests can be viewed and reprinted.

Strainsense Enterprises designs and manufactures custom, standard grade and heavy-duty grade load cells.  The heavy-duty grade load cells are best suited for applications of destructive testing, shock loads, and where large bending moments exist.  All of our load cells can be designed for an existing Prooftest machine (different thread variations are possible).  Strainsense load cells are designed and manufactured to pass the ASTM E4 +/-1% calibration standard.  Strainsense will also evaluate, repair, and test other manufacturer load cells.  Which can reduce the cost and down time of buying a new load cell.

30510 Rope Tension Loadcell uses in industrial applications where the tension in wire rope needs to be carefully and continuously monitored and prevent overload. The load cell is conveniently clamped-on to the rope in the existing condition. Designed to handle rope dia from 8mm to 80mm.

We mainly deal in ADI Artech Loadcells and are distributors of ADI ARTECH. Seegate Corporation is based in the weighing industry for 25 years and more. Has been known by all prominent Companies. 30510 Rope Tension Loadcell is utilized in mechanical applications where the pressure in wire rope should be cautiously and persistently checked. The heap cell is strategically located in corresponding with the rope without upsetting the rope’s current condition.

Load Cell Central"s DLWS clamp-on load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch. Using one of our digital indicators or load cell amplifiers, the system can provide relay ouptuts to activate a light. shut down the lifting operation, activate an audible alarm, or any combination of these.

(Shown below is a custom wireless Crane Load Limiter with industrial enclosures, large battery to power the system for up to 6 weeks between charges, and power supply for the receiver and load cell electronics)

Industrial weighting checker used rope tension load cell also available with Rudrra Sensor. This load cell is designed for tension mode application only. This load cell is used where the tension in wire rope needs to be carefully and continuously monitored.

This type of load cell is specially used for hook and pulley arrangement of crane. this load cell is made on custom design for higher capacities ranging from 20T to 500T. Beggining from material to dimension everything can be designed according to customer requirement.

Website designed & operated by DIELLE S.r.l. - Business Registration Office & Number: NA-483734 - European VAT Number: IT01523381216 - Fiscal Code: 06308490637 - Paid-up Capital: € 81.600 - D-U-N-S: 440178051.

Copyright 2020 by DIELLE SRL Industrial Automation. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, logos, and brands does not imply endorsement.

Load CellsWe are providing special steel construction rapid and easy mounting load cell with unique technique and stability. High Alloy Tool Steel construction for resistance against shock and overload.

Special Steel Construction Rapid and easy mounting (also on existing lifting systems). Used in applications where a dead end is not available for load measurement. Does not use up crane head space. Available Capacity from 1T to 5T.The Rope Tension Load Cell is mainly for use in Hoist and Crane weighing systems or in general where the tension in a steel wire needs to be measured. The load cells are clamped directly on the fixed end of a lifting wire rope and fitted with strain gauges allowing them to produce a signal proportional to the measured load. The Rope Tension Load Cell has a unique advantage that it is suitable for most commonly used rope sizes and can be clamped directly on to the wire rope, hence eliminating the requirement for any mechanical changes in the machine.

Unique technique, Good Seal Structure and High Security and Stability. High Alloy Tool Steel construction for resistance against shock and overload. Suitable for Travelling Crane and Lifting Structure. Available Capacity from 1T to 50T.

The pin type load Cell is mainly for use in Crane weighing systems or in general where the load applied on a pin needs to be measured. The pins are mounted on machines in place of normal shafts and fitted with strain gauges allowing them to produce a signal proportional to the measured load. The Load Pin has a highly secure and stable steel structure and is made of High Alloy Steel for resistance against shock and overload.

With the aim to offer excellent product line to varied industries, we especially design and manufacture a quality range of Lifting Equipment, E.O.T. Double Girder Crane, Single Grider EOT Crane, Over Head Mono Rail Travelling Trolley, Wire rope pulley, Manila Rope Pulley, Manual Crab Winches, Worm Gear Winch Machines, Pillar type JIB Crane, Manual JIB Crane, Jib Cranes, Hydraulic Jib Crane, Electrical Wire Rope Hoist, Electric Wire Rope Hoist, Vogal Wire Rope Hoist, HOT Single Girder Crane, HOT Double Girder Craneetc. These are manufactured from high quality raw materials using cutting edge technology in compliance with the set international quality standards. Owing to its rigid construction, longer serviceability and excellent load capacity, they are able to cater the needs of various industries such as heavy engineering, automobiles, construction, chemical, pharmaceuticals and various other sectors.

Load cells are sensors, or transducers to be exact, that can translate pressure (force) into an electrical signal. This allows operators of various lifting and rigging applications to precisely measure and safely monitor the tension of loads involving wire rope, guy wire, synthetic rope, shackles, and more.

Load cells are commonly used in oil and gas, shipping, construction, renewable energies, lifting and cranes, mining, staging, test and inspection, and military applications. Load monitoring load cells not only help prolong the life of your lifting and rigging equipment, they could also be the difference between your safety on the job or a costly accident.

Straightpoint Load Monitoring Loadcells, a Crosby owned company, offers unrivaled quality and functionality. Whether you’re looking for state-of-the-art wireless load cells or cabled load cells, Straightpoint has the load cell solution you’re looking for, and they"re all available right here at USCC.

Tension load cells, like Straightpoint’s Radiolink Plus (wireless) and Wirelink Plus (cabled), can handle tension reading capacities ranging from 1-ton up to 500-ton. Tension load cells from Straightpoint are designed to be used with Crosby shackles, but they are compatible with other brands as well. Tension load cells are commonly used for overhead weighing, testing, bollard pulling, tug testing, cable tensioning, and heavy lift applications. Straightpoint’s Towcell is the perfect solution for vehicle load monitoring applications as it fits directly onto a 2” tow ball.

Compression load cells are used to calculate center of gravity of large and heavy objects common in the heavy lift and structural weighing industry. Straightpoint compression load cells are an industry leader for both their compact size and wireless capabilities. These durable compression load cells can handle loads up to 1000-ton. When combined with Straightpoint"s software, you can read and monitor up to 100 wireless compression load cells from your computer or tablet and generate real time test certificates on site, all from a safe distance. Wired compression load cells are also available.

Straightpoint’s line tensionmeter, COLT, is an intelligent and industry-leading clamp on line tensionmeter. It’s a fast and accurate way to measure wire rope and guy wire tension, as well as electrical cable and synthetic rope. Straightpoint’s line of running line dynamometers are able to measure tension, line speed, and distance. These dynamometers are very useful in situations where there is no anchor or dead end on the line.

Loadshackles from Straightpoint provide the perfect solution to limited headroom or super heavy lift projects. Wireless, cabled, and Bluetooth-only versions are all available. Straightpoint Loadshackles are made using Crosby brand shackles, commonly the G2130 and G2140 shackle. All Loadshackles from Straightpoint have a load-centering bobbin and range in capacity from 3.25 ton to 400 ton.

Straightpoint’s line of Miniweigher Plus crane scales are compact, safe, accurate, and suitable for a number of applications. Miniweigher plus crane scales are often mounted between a winch and a tripod, allowing for load monitoring and safe lowering and raising of equipment and personnel. These modern crane scales are wireless and available in sizes ranging from 100kg up to 5 ton.

US Cargo Control has you covered with all your Straightpoint load cell needs, including INSIGHT load cell software, HHP App, SW-HHP wireless handheld devices, HHP cabled loadcell devices, extra HHP connecting cables, and more.

Choose between Straightpoint’s SW-HHP wireless handheld load cell reader, INSIGHT computer software, Straightpoint"s free HHP Bluetooth app, or an external display such as an LED scoreboard. No matter what type of load cell you need, Straightpoint offers the highest quality and most functionality on the market today.

Rope tension load cells are very simple to put in. they’ll install only where there’s a hard and fast non-moving rope. This arrangement would be ready to measure the load on one rope of the whole number of ropes of Crane, Elevator, etc. Therefore in theory the accuracy of this sort of system would be the smallest amount. This Load Cell also known as Wire rope load cell, Wire rope tension load cell, Wire tension load cell, Rope Load Cell, Rope Sensor, Rope clamp load cell, Crane load cell, Elevator load cell, Lift Load Cell, Hoist load cell, In-Line Force Sensor, Low Profile Shear Beam Load Cell, etc.