wire rope lubricants suppliers in stock

The Kirkpatrick Group, Inc. has been the Original Equipment Manufacturer of Dynagard™ Environmental Lubricants and Wire Rope Lubrication equipment for over 30 years. We developed the first successful Wire Rope Lubrication System

Full Sail Marine maintains offices around the world to offer quick response services to our clients in the Commercial, Government, Cruise and Offshore industries. With locations throughout North America and Europe, we stand ready

Manufacturer of wire rope & cable lubricants including grease. Specifications of wire rope & cable grease include pour point of minus 25 degrees F, flash point of 120 degrees F, viscosity of 3.28 at 100 degrees F & 12.8 at 40 degrees F, & specific gravity of 0.89. Wire rope & cable grease capacities include ability to penetrate wire rope, evaporate & leave a film of molybdenum disulphide in the core to lubricate each wire strand. Wire rope & cable grease can be applied by spraying, brushing or dipping in a in-line tank with no heating requirements. Grease is available in 25 lb. pail or 55 gal. drums. Compliant with ASTM standards.

This product is a semi-fluid wire rope lubricant designed to meet the lubrication and corrosion prevention requirements of wire ropes working under all conditions. Typical application areas are dockside and ship crane ropes, drag lines, hoists and mobile cranes.

Wire Rope Lube will penetrate between the rope strands to provide integral lubrication and to provide both internal and external protection against corrosion caused by wet, adverse weather conditions and sea water.

Crosby’s Vitalife®products are the preferred wire rope lubricants in the industry because of their ability to penetrate into wire rope and displace water and contaminants, thus reducing wear and corrosion throughout the rope.Available in a variety of container sizes.

Whitmore’s Wire Rope Lubricant products also coat these strands to prevent friction and wear. This results in longer wire rope life, less downtime for rope changes and more production.

Whitmore’s Wire Rope Lubricant is easily pumpable at temperatures down to -25°F (-35°C). Its nondrying film remains flexible in the most extreme weather conditions, which eliminates flaking and peeling.Whitmore’s Wire Rope Lubricant can be used to lubricate all sizes of wire rope, as well as chains, leaf springs and other applications where penetrating oil is needed. It may be applied by hand or automatic lube system.

LUBEGARD Wire Rope Lubricant is patented, aquatically non-toxic & biodegradable. It contains a unique blend of corrosion inhibitors, thickeners and wear reducers. Ideal for all types of wire ropes and chains in a variety of services and environments. Wire Rope Lubricant is biodegradable, non-toxic, and leave no oil slick! Biodegradable (EPA Shake Flask Test, EPA 560/6-82-003 with unacclimated inoculum) / Aquatically non-toxic (EPA 600/4-90-027, Rainbow trout test). Forms liquid protective layer, does not foul automatic applicators, Excellent for manual application, Water and salt water resistant. Can be applied in many ways; spray, wipe, dip or brush it on. It can also be applied with various low viscosity core lubricators. Apply as necessary for lubrication and corrosion protection.

VGP Compliant - Shell Naturelle S2 Wire Rope Lubricant A is an Environmentally Acceptable Lubricant under the definitions of the USA EPA 2013 Vessel General Permit.

Low toxicity towards the environment - Made from >60% renewable raw materials. Shell Naturelle S2 Wire Rope Lubricant A is also classed as minimally toxic and non-bioaccumulative.

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal against corrosive attack.

Typical Applications: Wire rope, chain links, pins, bushings, cable sheave bushings, cables, open and closed silent and roller chains, and small, slow-turning gearboxes that require a semifluid lubricant

Wirelife Almasol Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.

Wirelife Almasol Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE’s exclusive wear-reducing additive.

Wirelife Monolec Penetrating Lubricant (2001) has excellent corrosion resistance and high load-carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol Coating Lubricant, maximum protection and wear reduction is achieved.

It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Available in bulk sizes or in an aerosol version.

Typical Applications: All stationary or moving wire ropes or cables under heavy loads; chains of all sizes; mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; any other application that requires excellent rust protection for steel parts.

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE’s Wirelife Low Tox Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Earthwise EAL Wire Rope Grease (3353) is recommended for use in applications on or near the waterways. It is an EAL and meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation.

Typical Applications: Applications near or around waterways including: Wire rope; chain links, pins and bushings; cable sheave bushings, bearings and strands; open and closed silent and roller chains. Ideal for use in automatic lubrication systems.

LE is happy to offer industrial lubricant and reliability recommendations for a variety of applications, and to provide product-specific data on all of our items to help you make the right decision. To learn more about our wire rope lubricants, wire rope lubricators as well as our other enhanced lubricants and lubricant reliability products, please

Whether you are working with manufacturing equipment, automotive equipment, or any other industrial equipment, you need products you can count on to reduce friction and wear. Kimball Midwest carries the right chain and rope lubricants for your operation. Our

Phillips 66® Cable Lube is a heavy-duty lubricant developed for the lubrication and preservation of wire ropes and cables. It is formulated with a heavy residual base oil along with special rust and corrosion inhibitors and is cut back with a volatile, non-chlorinated solvent for ease of application without heating. Its low viscosity and special wetting properties permit penetration to the core of the wire rope or cable. The solvent then evaporates, leaving a tough, semi-fluid lubricant in the core and on each wire strand.

The Chain and Wire Rope Lubricant is a heavy duty high temperature and pressure lubricant that penetrates chains, cables, and wire rope to deposit a wear resistant coating. The foam spray clings to the surface penetrates and coats leaving a Molybdenum and extreme pressure lubricant on the inner surfaces. This two in one lubricant both penetrates into the core of the wire rope , evaporates and leaves behind a heavy lubricating film to protect and lubricate each strand and with a second coating penetrates slightly and seals the outside from moisture reducing wear and corrosion.

The Chain and Wire Rope Lubricant can be used on conveyors, hoist chains, link and roller assemblies, rail equipment, mining equipment, road and construction machinery, cutter bars, material handling equipment, chain saws, etc.