wire rope lubricants suppliers for sale

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal against corrosive attack.

Typical Applications: Wire rope, chain links, pins, bushings, cable sheave bushings, cables, open and closed silent and roller chains, and small, slow-turning gearboxes that require a semifluid lubricant

Wirelife Almasol Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.

Wirelife Almasol Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE’s exclusive wear-reducing additive.

Wirelife Monolec Penetrating Lubricant (2001) has excellent corrosion resistance and high load-carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol Coating Lubricant, maximum protection and wear reduction is achieved.

It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Available in bulk sizes or in an aerosol version.

Typical Applications: All stationary or moving wire ropes or cables under heavy loads; chains of all sizes; mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; any other application that requires excellent rust protection for steel parts.

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE’s Wirelife Low Tox Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Earthwise EAL Wire Rope Grease (3353) is recommended for use in applications on or near the waterways. It is an EAL and meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation.

Typical Applications: Applications near or around waterways including: Wire rope; chain links, pins and bushings; cable sheave bushings, bearings and strands; open and closed silent and roller chains. Ideal for use in automatic lubrication systems.

LE is happy to offer industrial lubricant and reliability recommendations for a variety of applications, and to provide product-specific data on all of our items to help you make the right decision. To learn more about our wire rope lubricants, wire rope lubricators as well as our other enhanced lubricants and lubricant reliability products, please

Wire Rope Lubricant quickly penetrates to the core. This ensures that the rope is lubricated throughout while providing a nondrying, nontacky film on the outside of the rope which protects outer strands from corrosion as well as lubricating the wire rope drums and sheaves.

LUBEGARD Wire Rope Lubricant is patented, aquatically non-toxic & biodegradable. It contains a unique blend of corrosion inhibitors, thickeners and wear reducers. Ideal for all types of wire ropes and chains in a variety of services and environments. Wire Rope Lubricant is biodegradable, non-toxic, and leave no oil slick! Biodegradable (EPA Shake Flask Test, EPA 560/6-82-003 with unacclimated inoculum) / Aquatically non-toxic (EPA 600/4-90-027, Rainbow trout test). Forms liquid protective layer, does not foul automatic applicators, Excellent for manual application, Water and salt water resistant. Can be applied in many ways; spray, wipe, dip or brush it on. It can also be applied with various low viscosity core lubricators. Apply as necessary for lubrication and corrosion protection.

Distributor of wire rope and cable lubricants. Lubricants come in multiple forms and are frequently used to reduce friction, prevent thread locking and provide chemical resistance.

Manufacturer of heavy duty lubricants for chain, wire rope and cable applications. Available in 16 oz. capacity and 900 degrees F operating temperature. Protects from corrosion and rust. Provides non-gumming protective film. Serves the marine, heavy equipment repair, mining, power generation, wastewater treatment and chemical industries.

Distributor of wire and cable drawing and pulling lubricants. Value added services include assembly, barcoding, bin stocking, bonded inventory, consignment inventor, consolidated billing, dock-to-stock, drop ship, EDI, electronic funds, JIT, Kanban, kitting, long term pricing, one-stop, quality control, rebates, schedule sharing, vendor inventory, and more.

Manufacturer of wire rope & cable lubricants. Products include coating grease, penetrating lubricants, coating lubricants & synthetic coating lubricants. Services include equipment reliability assessment, oil analysis, lubricant storage, handling & transfer, contamination exclusion, contamination removal, education & training & design, implementation & support.

Manufacturer of non-staining and slow-drying foam and synthetic wax wire/cable pulling lubricants. Available in aerosol cans, squeeze bottles and buckets. Working temperature ranges from 20 to 122 degrees F. Suitable for electrical and utility applications. Meets ANSI, ASTM and OSHA standards. CSA approved. cUL listed. Made in the USA.

Manufacturer and distributor of multi-purpose and heavy duty aerosol grease chain/cable lubricants. Available in 16 oz. capacity. Contains molybdenum disulfide. Suitable for chain saw, hinge, hoist, conveyor, wire rope and cable, roller chain and sprocket applications. Meets NFPA standards.

Manufacturer of lubricants including oils and grease for oven, conveyor chains, wire ropes and cables applications. Features include biodegradability, temperature and mechanical stability, non-toxic, resistance to rust or corrosion. Extremely high temperature working grease is also offered. Packaged in pails, drums, cans and tote. Serves the construction, agriculture, energy, government, rail, mining, oil and gas industries. NSF H1 Certified. USDA, FM and FDA approved.

Manufacturer and distributor of wire pulling cable lubricants for industrial applications. Available in pails, bottles and drums with an operating temperature from 30 degrees F to 120 degrees F and 6 pH to 8 pH solution. Various features include cling characteristics, translucent, non-staining, non-toxic and non-corrosive. Lubricant gels are suitable for reducing friction. Meets ASTM-D1693 and IEEE-1210-1996 standards. UL listed. On-time delivery.

Distributor of cable and wire rope lubricants. Features include semi-synthetic and polymer base formulations and high temperature stabilities. Suitable for use with wire or cable insulated with rubber, neoprene, nylon and PVC plastics , hypalon, high density polyethylene and cross linked polyethylene (XLP). Serves the chemical, civil, food, mining, oil, gas, power generation, paper, OEM and wastewater industries.

Manufacturer of wire rope and cable lubricants. Contains organic molybdenum and anti-wear additives. Resistant to corrosion, water wash-off, high-temperature sling off and friction. Used in meat and poultry plants. Can withstand temperatures up to 350 degrees F. Offered in 16 oz. aerosol containers and 5 gal. and 55 gal. drums. Markets served include food and beverage, marine, oil and gas, automotive, utility, commercial and institutional. On-time delivery available.

Manufacturer of a complete line of specialty lubricants, anti-seize, and dry film lubricants available in aerosol & bulk. Lubricant applications used for cable, chain, extreme pressure, friction & wear, high pressure, high temperature, industrial process, low temperature, rope, water repellent, and belting. Contract packaging & custom formulations.

Distributor of lubricants for industrial and commercial applications. Products include greases, engine and compressor oils, transmission fluids, fuels, oil additives, hand and industrial cleaners. Types of lubricants include wire rope/chain, cable, gear, food-grade and industrial spray. Other services such as diagnostic, preventive maintenance, monitoring, testing and evaluation. Serves the heavy construction, mining, manufacturing, marine, transportation, agri-business, concrete, sand and gravel industries.

ISO 9001:2000 certified manufacturer & distributor of lubricant products including chain, wire rope & cable lubricants. Services include analysis & consultation, operation & plant surveys & fuel & oil analysis.

ISO 9001:2000 certified woman-owned manufacturer of standard & custom wire drawing, wire pulling, wire rope, cable & chain lubricants including molybdenum disulfide aerosol lubricants. Features include anti-friction & anti-wear properties. Aerosol lubricants range in operating temperatures from -300 degrees F to plus 750 degrees F with molybdenum disulfide concentration of 5 percent . Made in the USA.

Manufacturer & distributor of marine lubricants & wire rope & cable lubricants. Equipment rental, load testing, crane designing, crane installation, crane inspection, crane repairing, rigging inspection, sling & rigging fabrication, lifting, rigging workshops & training, assembling, wire rope fabrication & proof testing services are available.

Manufacturer of wire rope lubricants including wire rope & cable lubricants. Heavy duty wire rope lubricants contain penetrant, anti-oxidant & lubricating solids. Wire rope lubricants have extreme pressure & are formulated to provide extended service life for different types of wire ropes.

Native American-owned (MBE) distributor of industrial aerosol gear and wire rope lubricants. Industries served include military, power generation, oil and gas, construction, outdoor entertainment parks, chemical, food and beverage, and tire and rubber manufacturing. Provides 24/7 emergency on-call fastener replacement services. DOE and DOD MIL-I compliant.

ISO 9001:2015 certified custom manufacturer of water or solvent based lubricants for wire ropes & cables. Lubricants include molybdenum disulfide & PTFE (polytetrafluoroethylene) dry film lubricants, molybdenum disulfide & PTFE mixtures & molybdenum disulfide oil dispersions, grease, paste & powders. Applications include machine parts & fittings, cams & springs, leather, plastic & elastomeric gaskets & packing, natural & synthetic cords, twines & cables, bearings, sliding surfaces, threaded connections & open gears.

Molybdenum disulfide (moly) & graphite dry lubricants with rust & corrosion inhibitors for outdoor applications & as protective coating for wire rope & cable, crane booms & mine shaft cables.

Manufacturer of industrial lubricants for wire ropes and cables. Offers heavy duty, gear, multi-purpose, and high viscosity index types. Specifications include 0.852 and 1.000 specific gravity at 60 degrees F usable temperature. Available with various features such as friction and wear reduction, wetting and penetrating ability, rust and corrosion protection, and metal surface adhesion.

Ensure they are properly lubricated and contact us to assist with your next maintenance interval on Syncrolifts, ROV Umbilicals, Cranes, Bridges, Hoists, Dams, ski-lifts...and more.

With Alibaba.com, you can rest easy that you will be able to find the exact wholesale wire rope lubricants for the applications you have in mind. As one of the largest marketplaces for B2B shopping in the world, we have a huge network of wholesalers that have listed all sorts of lubricating jelly products and more.

For personal lube listings, we have a range of safe-to-use wire rope lubricants products. This includes pre seed lubricant options that are great for couples trying to conceive and mimics the body’s natural lubricants. For older women, we have options for menopause dryness. These vaginal moisturizers are designed specifically to prevent discomfort and add pleasure. For those with sensitive skin, we have specialist lube for sensitive skin products.

wire rope lubricants are also needed for home appliances and industrial lubricants. For home use, we have products for gun lubrication, sewing machine lubricants and more. These petroleum based lubricants can be used anywhere in the home where moving parts rub together. Squeaky door hinges will be a thing of the past with the options available here.

A specially formulated penetrating lubricant for wire ropes. Can be applied directly onto wet ropes while providing excellent adhesive properties, reducing consumption. Prevents inner strand corrosion and rubbing wear. It is an all-season product that does not require change of grades as temperatures fluctuate. Applicable manually or through most automatic lube systems. Useful temperature range -46°C to 60°C (-50°F to 140°F).

Phillips 66® Cable Lube is a heavy-duty lubricant developed for the lubrication and preservation of wire ropes and cables. It is formulated with a heavy residual base oil along with special rust and corrosion inhibitors and is cut back with a volatile, non-chlorinated solvent for ease of application without heating. Its low viscosity and special wetting properties permit penetration to the core of the wire rope or cable. The solvent then evaporates, leaving a tough, semi-fluid lubricant in the core and on each wire strand.

Schaeffer’s 199 Silver Streak® Wire Rope Lubricant (40 Lbs) is a robust, heavy-duty lubricant that extends the service life of wire ropes. Silver Streak® Wire Rope is made with high viscosity index paraffin base oils, synthetic base oils and penetrating oils. This unique blend allows Silver Streak® Wire Rope to retain consistency in extreme temperature changes. Silver Streak® Wire Rope rapidly penetrates the inner wire rope core to reduce friction and wear between the wire rope (cable) strands, and the sheaves and drums. Silver Streak® Wire Rope can be used on all types of wire ropes (cables) common to mining, construction, and the marine industry.

Fluid Film WRO-EP is a Wire Rope Lubricant for Extreme Pressure (EP) applications. It provides corrosion protection and lubrication for Bridge Cables, Drag Lines and Rigging Cables both stationary and moving. The high tackiness of Fluid Film WRO-EP makes it perfect for resisting flying off at high speeds and water washout. Additionally, it is a great choice for open gear applications due to its tackiness and extreme pressure additives.

Vitalife 400 is the preferred wire rope lubricant in the industry because of their ability to penetrate into wire rope and displace water and contaminants, thus reducing wear and corrosion throughout the rope. Provides inner strand preservation and lubricity. Allows for easy visual inspection of the ropes. Reduces the friction between the strands of the wire rope, thus extending rope life. Adheres to the surface of strands, forming an outer film that provides excellent corrosive protection. Non-tacky (will not attract dust)

Developed as a service tool, the Lincoln Wire Rope Lubricator is attached periodically to equipment on a monthly, quarterly or other cycle to lubricate wire ropes. Lubrication intervals should be determined according to rope manufacturer specifications. The life cycle of a steel wire rope that has been periodically lubricated is approximately six to eight times longer than a wire rope that has not been lubricated. Specifically for Wire Rope Lubricator applications a biodegradable grease LGTE 2 is available. The grease is environmentally acceptable and certified with Ecolabel.

Also, lubricating a wire rope while in service helps to prevent corrosion of the wires. Corrosion can be internal and external, and it often is caused by acids, alkaline waters, salt air, humidity, fumes, and abrasive and industrial environments in general.

The Kirkpatrick Group, Inc., manufacturer of Kirkpatrick Wire Rope Lubrications Systems has kept very busy since their story last appeared on these pages back in 2003. Owner and President Bob Kirkpatrick points out their number one goal remains unchanged and that goal is to provide clients with innovation, safety and support for the care and maintenance of their wire ropes.

“What is unique about the testimonials we’ve received over the years is that they’ve come to us unsolicited through third parties. Their evaluations and opinions concerning the performance of our product came directly from their own successful use of it in their wire rope preventative maintenance programs.”

The use of wire rope pressure applicators has now become a main stay inmost wire rope maintenance applications worldwide since Kirkpatrick first introduced them to the world market in 1982. Wire rope pressure lubrication has changed the manner in which industries maintain their wire ropes on a worldwide basis simply because their use has established that the working life of wire rope has been extended. In addition, labor savings has proven to be as much as 50 times greater as compared to the labor costs and time spent  using manually applied methods.

Since 1982, Kirkpatrick has gained a broad knowledge of what it takes to optimally apply wire rope dressings to wire rope, no matter what method is used. This a direct result of his own infield and daily troubleshooting experience over the last 33 years.

“The fact is that the most important time a wire rope can receive a coating is during the manufacturing process when every strand can be coated prior to the wire rope being closed. I always push customers to use as viscous a coating as possible. This is especially true in the mining industry. It may be a little more expensive; however, the rewards of a longer wire rope life more than justifies it.

“Protection against friction wear and strand rubbing is guaranteed with heavier viscosity wire rope lubricants marrying well to the original lay-up material. Our systems will apply any viscosity product including oils. Therefore, my opinion is not generated from its shortcomings in the application of different consistencies. We can perform with them all if they are able to be pumped. That is in a range of NLGI Grade 3 greases.

“In the case of oils used on working ropes where friction wear is of high concern and adequate fluid film protection between the strands is a must, those oils only apply microscopic layer protection against strand rubbing. They can also serve to emulsify and wash out the original layup material. By analogy, would you oil your car wheel bearings or grease them? In the event that oils are used, it is necessary to treat the rope more often because once the original lay-up material is gone; the oils must take its place.”

Currently, most wire rope contractors are being required to pressure lube their customers’ wire ropes in offshore field applications or prior to delivery to the drill ships or rigs. There is also so much out there yet to be learned. The growth Kirkpatrick has experienced has resulted in the fact that they have a data base of more than 10,000 clients involved to some degree in wire rope preventative maintenance.

“I sit at my desk every day and find that I have to send troubleshooting emails out around the world. I thoroughly enjoy the process. I am exposed to every industry where wire rope is used as well as to so many different cultures. They all have their own style of doing business. However, they all have one thing in common: They need follow through and support to analyze their applications and then after sale support to make the use of our systems successful for them. I feel we definitely have the know-how.”

During pressure lubrication wire rope passes through a 100% pressurized and controlled immersion many times faster than manual applications. This in turn reduces labor costs, improves safety as well as increases the working life of the wire ropes being treated. The outer surface and groove pattern is wiped clean of water and contaminants which then allows optimal penetration of coating; there is less lubricant waste and more fluid film support between the strands, helping out in reducing friction wear.

“The reason for this is that the lubricant moves through and around the wire rope in the stationary pre-travel mode and then as the wire rope travels through the seals more pressure is released as the wire rope removes the lubricant feeding into the seals. In any event the amount of internal pressure is dependent on the strand density and the configuration of the wire rope it has to penetrate.

Ninety-nine percent of the time the lubricant is not going through the core, according to Kirkpatrick. If the pressure lubricator is constructed correctly, it will fill every open space in the rope that is available to receive the load. The other way to do it is to surface coat the wire rope with a rag.

The Naval Air Systems Command – Chief of Naval Operations Pre-production Evaluation Final Report concluded that the Kirkpatrick Model SU35B Wire Rope Lubricator evaluated during the project appeared to have significant potential for reducing material usage and waste disposal costs. Significant labor savings were found to be possible due to the reduced labor required to perform cable cleaning and lubricating events.

“Of equal importance, the wire rope lubrication system is a safer alternative than the previous method used because it does not require personnel to place grease on their gloves and wipe the crane cable. The cost analysis showed a 10-year return on investment (ROI) of approximately $135,900.60 and a breakeven point of .41 years,” according to the Navy’s report.

The Navy Public Works Department, San Diego found the Kirkpatrick Model SU35B Wire Rope Lubricator system to increase productivity and reduce costs. Their results were that the automated wire rope lubrication system extends the life span of wire rope, reducing the costs of removing and disposing of worn out wire rope and the purchase and installation of replacement rope.

“Operating costs are also reduced, because cranes are less frequently taken out of service to be refitted with new wire rope. The automated system cleans and lubricates wire rope at a rate of 100 feet per minute as compared to the manual rate of approximately one foot per minute.

“Cleaning and lubricating wire ropes on cranes using the old manual method took approximately five eight-hour workdays per crane. Using the automated system, wire rope on a crane can now be cleaned and lubricated in one eight-hour day. This represents significant savings in labor costs. The automated wire rope lubricator has reduced PWC San Diego’s annual cost of cleaning cables from about $320,000.00 a year to approximately $34,000.00, a yearly generating savings of approximately $286,000.00.”

Navy maintenance practices require that crane cables be periodically cleaned and lubricated. The cables are constructed of multiple wire ropes that have been twisted together. Cleaning and lubricating provides corrosion resistance and extends the service life of the cable. Cable performance is improved by eliminating additional drag caused by the buildup.

The first step of crane cable maintenance involves cleaning the cable to remove any accumulation of dirt, marine growth, old grease, rust, and small particles of metal from between the wire ropes that form the cable. After cleaning the cable, grease is reapplied to allow the crane cable to achieve its top operating speed and hauling ability. Metals that are scraped off during the cleaning process are disposed of as hazardous waste.

reduce the generation of wastes (degreaser, rags, grease) during cleaning and lubricating, provide a safer working environment and improve the efficiency of wire rope cleaning and lubricating as well as reduce the amount of hazardous material (grease) applied to the cables.

The site arranged for the WRL to be temporarily attached to a forklift in order to achieve an angle for the lubrication collar to operate properly. The ability of any given site to mount the lubrication collar in such a manner is dependent upon available equipment resources. It is also important to optimize the speed at which the cable is pulled through the lubrication collar and the pressure with which the grease is applied.

Bob Kirkpatrick feels that his firm has designed the most efficient wire rope lubrication system available today. “We understand what is required to provide those we serve with the right system for their specific application prior to purchase and then to maximize the customer’s use of that system once it is received.