franks 300 workover rig brands

Franks 300 D.D. powered by a Detroit Series 60 with a HT 750 Allison transmission mounted on a Franks four axle carrier with a Franks 96 ft .. 215,000 lb. capacity derrick. This rig is equipped with an adjustable driller and work platform system up to 17 ft., hydromatic, hydraulic jacks, winch, B.O.P. controls.

Well Service | Workover Rigs - WELL SERVICE RIG - FRANKS 1287-160-DTD-HT D/D Well Service Unit p/b DETROIT 8V-71N Diesel Eng, ALLISON CBT-4460-1 Trans. SERVICE KING 96" 180,000# Hydraulically Raised & ... More Info

Well Service | Workover Rigs - FRANKS 300 D/D 1287 w/hydromatic brake, Well Service Unit p/b DETROIT 8V-71 Diesel Eng, ALLISON 750 Trans, (Reman Dec 2011) FRANKS 96’H 150,000# Tri-Scope Telescopin... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b CAT 3406 Diesel Eng, ALLISON HT-750 Trans, FRANKS 96’H 180,000# 4-Leg Telescoping Mast, Hydraulically Raised & Scoped w/4-Sheave... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b Series 60 Detroit Diesel Eng, ALLISON 5860 Trans, 102’H 225,000# (on 4 line) Telescoping Mast, Hydraulically Raised & Scoped, Db... More Info

Franks Double Drum back-in Wellservice/Workover unit. Lebus Grooved for drill line & sand line w / line type weight indicator, air clutches & controls and McCormick 300,000 lb weight indicator. 10,000′ New sand line.Tongs included, no tools.

Mast:Franks 84’ 4-leg mast, 120,000 lb. Static hook load, hydraulically raised & scoped w/(2) raising rams, (5) sheaves, crown safety platform, and double tubing board, rod board, ladder, guy lines and adjustable working platform.

Carrier: All above mounted Franks tandem axle front, tandem rear carrier, Detroit 8V92 diesel engine w/ electric start, radiator, gauges, hydraulic pump, Allison 5964 6 speed transmission, single man cab, tool boxes, hydraulic reservoir, water tank, air receiver tank, (2) 100 gallon fuel tanks, (2) hydraulic leveling jacks, hydraulic winch, Hercules 118 deadline anchor, folding walkways, safety rails, stairs, 65R22.5 front tires & 12R22.5 rear tires.

Also ask me about my entire supply line of other oil patch equipment, New, Used and Surplus, Mud Systems, Vessels, Casing, Tubing, Swivel Rotary, Rods, Gas Turbines, Steel and Fiberglass Production Tanks, Backhoes, PumpJacks, Rods CNG Compression Packages, Tongs, Swivel Joints, Heavy Equipment, Drilling and Workover Rigs, Construction! Do you have any oilfield equipment that you seek to market? I Get Quality Oilfield New, Used and Surplus Equipment.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable...

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 ...

Single drum, 10” x 13” pole, 80,000#, mounted on 1993 Mack RD6885 truck, currently in service, rig has plumbing for hydraulic tongs, has winch for raising and scoping out the pole  Price:  $92,500

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

WILSON WELL SERVICE RIG  (Ref#3000Ta)  103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR

Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread  7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch.  Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations.  Price:  $265,000

Built 2012, 42 x 12 drawworks, Cat C15 (475 hp) engine,  112’ x 300,000# derrick, mounted on 5 axle carrier.  Includes skid mounted Gardner Denver PAH mud pump with Detroit 8V92 engine (gear end is good, but needs fluid ends machined or replaced).  Package Price:  $270,000

Manufactured 2014, 72’ x 180,000# derrick on 4-line (250,000# on 6-line), mounted on 5 axle carrier, Detroit Series 60, Allison transmission, all hydraulic, 8000’ of 5/8” sandline, 100 ton McKissick casing blocks, 1” line 42” x 12” casing drum, 42” x 12” sand drum, disc assist on casing drum, 1500 hours, 3000 miles.  Westco power tongs 1-1/2”, 2”, 2-7/8” and 5-1/2”, set of bails/links, tubing elevators 1-1/2” – 2”, rod hook, elevators, wrenches, swab tools, Martin Decker weight indicator, stored inside  Price:  $645,000

Derrick fell onto rig when being raised, derrick would need to be replaced or repaired.  Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake.  Extra rebuilt 3408 Cat engine.  Price as is:  $112,500

Chinese built 2006, 8300 hours, 104’ x 250,000# derrick, rod basket and tubing board (18000’ tubing capacity), Detroit Series 60 diesel engine, 5680 Allison 5-speed transmission, sandline drum with 14,500’ 9/16” sandline (new January 2022), main drum with 1’ drill line on 6 lines with conventional brake pads and brake assist (new November 2021), brand new winch line (replaced May 2022), mounted on 6 axle carrier (2 steer, 2 drive and 2 tag), total weight 100,000 lbs., currently working  Price:  $270,000

Manufactured 1981, mounted on 5 axle carrier, double triple service rig, 96’ x 250,000# derrick, Detroit Series 60 12.7 diesel engine, Allison transmission, 9/16” sandline, 1” drill line,  hydraulic jacks, hydraulic catwalk, travelling block, tubing bard, rod basket and all necessary lines.  Tooling not included.  Price:  $115,000

Manufactured 1983, double drum, 96’ x 180,000# derrick, mounted on 5 axle carrier with 92T engine, Allison transmission  Price rig only:  $300,000  Price with tooling:$340,000

WILSON 42 WELL SERVICE RIG(Ref#7562Ta)  Manufactured 1975, 180,000# Pemco double/triple derrick, mounted on Wilson carrier with Detroit 8V71 engine, 4 hydraulic leveling jacks, ready to work  Price rig only:  $74,500  Price with tooling:  $94,500

Manufactured 1983, 70" x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier.  Rig runs and truck drives, stacked for several years, good condition  Price:  $93,500 USD

FRANKS 300 SERVICE RIG(Ref#1169Ta)  4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition  Price:  $37,500

Manufactured 1980, (2) Cat C13 engines, Allison transmission on 6 axle carrier, 108" x 300,000# mast with mast lights, single 2042 drum drawworks with water cooled brake, 2 hydrraulic winches  Price:  $170,000

Double drum Wilson Sr and Wilson JR drawworks, sandline capacity 10000" of 3/16", mounted on tandem axle, 1987 Freightliner tandem axle truck powered by Detroit diesel engine, 2 hydraulic leveling jacks, Detroit diesel on deck, 50" hydraulically raised mast, brand new hydraulic cylinder just replaced for lifting derrick, has pulled a minimum of 3000" wells, all new hydraulics   PRICE:  $137,500

WILSON MOGUEL 42 WELL SERVICE RIG(Ref#3177Tb)  Two available, 96" x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools  Price:  $315,000

Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity.  Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig.  5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks  Price on Request

Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch.  Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed.  But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run.    Price as is: $19,500

Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline  Price:  $225,000

CARDWELL KB200B SERVICE RIG(Ref#11674Ta)  72’ x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission PRICE:  $127,500

Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years  Price:  $92,500

1980, 475 hp, single drum (new), reworked, 96" x 205,000# hydraulically raised mast, 6 lines,  crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use   PRICE: $115,000

SKYTOP BREWSTER RR400(Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36" base beam for rig, ready to work  Price:  $110,000

Detroit 8V-71N Diesel Eng, Allison CBT-4460-1 Trans.  Service King 96" x 180,000# Hydraulically Raised & Scoped W/5-Sheave Crown, Dbl Tubing & Triple Rod Boards.  Mtd On Franks 4-Axle Carrier W/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Floatation Front Tires  Price:  $350,000

Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field  Price:  $295,000

Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily  Price rig only:  $157,500

Double drum drawworks with hydromatic brake, 10" brakes, 96" x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650" of 7/8" tubing line, 8000" of 9/16" swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84" links, 2-3/8" and 2-7/8" tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections  Price:  $140,000

CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96"H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform.  Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires  Price:  $300,000

Manufactured 1974, double drum drawworks,  double triple 96" x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000" 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000"s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED:  $115,000

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head  Price:  $242,500

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling  Price:  $52,500

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

Manufactured 1960, Double drum, all air operated, 7/8" drill line, 9/16" sandline, 60" single pole 10 x 13, mounted on Franks 3 axle carrier, will handle 8000" of 2-3/8" tubing or 6000" of 2-7/8" tubing, tools include tongs and handling tools, good condition  Price:  $69,500

Cable Tool Drilling and Completion Rig, 60" double poles rated to 150,000#, 5000" drill capacity, 10,000" pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300" drill line on drum, 3500" on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine  Price:  $72,500

400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good.  Includes elevators, oil saver pump, no BJ tongs, currently working.  Price:  $87,500 - Pennsylvania

Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools  Price:  $112,500 - Oklahoma

WALKERNEER RS-3500 DRILLING RIG(1400m/4500’ depth) (Ref#951R)  Manufactured 1981, R3 single Wemas stiff single mast, 133,500 daN Rostel built skidded substructure, hydraulic system, 18” Howard Turner rotary table, Detroit 671 drawworks engine w/Allison 740HD transmission, 10’ x 20’ doghouse, BOJI F-800 triplex mud pump (2002), Cat 3412E engine with Allison M6610A transmission (2002), sloped bottom one tank mud system 45 m3, DFTS variable motion shale shaker (2007), centrifugal pumps w/Deutz engine, Hydril 9” annular preventer (1991), Shaffer type LWP 9” ram preventer (1991), drilling spool, Vavcon accumulator (1991), National Type 716mm flanged manifold, McKissick 50 ton block with hook, Starozik swivel, Deutz engine w/55kw Simpson Maxwell generator, 12’ wide combination building, Catwalk (40’ long x 10” wide), 2005 Roadway wellsite unit, 1995 Volcano boiler  Price:  $990,000

WALKER-NEER 2000(Ref#9625R)  Manufactured 1973, single drum drawworks, Detroit 76V71 diesel engine, TC575 torque converter, driving three speed 627, Allison transmission, Howard Turner RT18 rotary table, 19.5m (64’) x 35,000 daN (78,600#) mast, mast was redone in 1988 with crown, gude lines, tubing board and block, mounted on 8 wheel Fruehauf 40’L x 10’W step deck trailer, doghouse, tooroom, catwalk, 4-pen Geolograph, substructure with hydraulic sub levelling system, flip up extended working floor, safety railings, V door.  Rigs needs work.  Price:  $70,000

WALKER NEER 2000 DRILLING RIG(Ref#3662T)  Trailer mounted, 692 Detroit deck engine, catwalks, kelly bar, pipe spinner, tongs, scales, mud lines, rotary table, 65’ x 14’ x 15’, located Canada Price:  $150,000

WALKER NEER C37(Ref#10206T)  Cable Tool Drilling and Completion Rig, 60’ double poles rated to 150,000#, 5000’ drill capacity, 10,000’ pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300’ drill line on drum, 3500’ on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine  Price:  $72,500

WALKER NEER 32 SPECIAL(Ref#1923N)  Manufactured 1953, 2500’ drill line, 3000’ sandline, 140 Waukeshaw engine, mounted on double axle trailer, 2 lines (drill line, sand line), double pole, friction clutches, fully tooled    PRICE:  $45,000

WALKER NEER 28(Ref#10087T)  double pole rig, 6000’ bailer line, block line, no drill line, mounted on tandem axle trailer, 2 leveling jacks, fuel tank  Price:  $44,500

WALKER NEER C25A POLE RIG(Ref#6723T)  double poles, Cummins deck engine, mounted on 1986 Mack truck with diesel engine, fully tooled, BJ tongs, rod elevators, rod wrenches, 2-3/8 and 4-1/2 air slips, good working condition  POR

CABOT 900 BACK IN DRILLING RIG(Ref#12893T)  Single drum Cabot 2346 drawworks, Lebus grooved for 1-1/8” line, Twin Detroit 12V71 engines, 112’ x 350,000# Cabot SHL telescoping derrick, mounted on 6 axle carrier, (2) Lanzhou F1000 triplex mud pumps  POR

CABOT 900 DRILLING RIG(Ref#3005T)  (2) Cat C15 engines, Allison 5860 transmission, 117’ x 350,000 derrick, 17-1/2” rotary, 200 ton GD block, pipe spinner, Type 80 annular BOP  Price:  $475,000

CABOT 550 TRAILER MOUNTED DRILL RIG PACKAGE(Ref#11850T)  Cabot Franks Explorer drawworks, Detroit 60 Series diesel engne, 3 axle trailer, 6 speed Allison 5860 transmission, 96’ x 250,000# Cabot mast, 4 sheave Cabot crown with Lebus grooving, 160 ton Ideco Shorty block, 125 ton Ideco Swivel, 40’ square kelly, (new) 45’ long 5000 psi kelly hose, 17-1/2” x 44” Oilwell table with bushings, 10’H x 300,000# capacity Cabot substrcuture (3-piece), 5’ x 3,000# Cabot pony sub, 5000’ 4-1/2” flush joint drill pipe, (6) 6” x 20’ drill collars (3 spiral), 4-1/2” 150 ton BJ elevator,  (2) mud tanks, shale shaker, catwalk, dog house, many extras Price:  $500,000

FRANKS 2042 SD WELL SERVICE RIG(Ref#11459T)  Manufactured 1980, (2) Cat C13 engines, Allison transmission on 6 axle carrier, 108’ x 300,000# mast with mast lights, single 2042 drum drawworks with water cooled brake, 2 hydrraulic winches  Price:  $170,000

CABOT 750 WORKOVER RIG(Ref#652T)  Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread  7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch.  Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations.  Price:  $265,000

FRANKS 1287-160-DTD-HT D/D WELL SERVICE UNIT(Ref#1683Rj)   Detroit 8V-71N Diesel Eng, Allison CBT-4460-1 Trans.  Service King 96" x 180,000# Hydraulically Raised & Scoped W/5-Sheave Crown, Dbl Tubing & Triple Rod Boards.  Mtd On Franks 4-Axle Carrier W/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Floatation Front Tires  Price:  $350,000

FRANKS 1287/160 WORKOVER RIG(Ref#2476Tb)  Manufactured 1979, Double drum 1” drill line, 9/16” sandline, 100 ton McKissick block, 96’ x 215,000# 4-legged mast, 60 Series Detroit engine (approx. 4100 engine hrs since installed in rig), Allison CLT 750 transmission Price:  $85,000

FRANKS 1287 DOUBLE/DOUBLE BACK IN WELL SERVICE RIG(Ref#3875R)  Manufactured 1969, double drum,   Lebus grooved for 7/8” drill line and 7/16” sandline, weight indicator, hydromatic brake, air clutches and controls, Loadcraft 104’ x 250,000# hydraulically raised and scoped mast, mounted on Loadcraft carrier tandem axle front/tri axle rear, 8V71T Detroit diesel engine, radiator, gauges, hydraulic pump, Allison 4460 transmission, hydraulic reservoir, water tank, air receiver tank, fuel tanks, 4 hydraulic leveling jacks, Hercules 118 deadline anchor, hydraulic winch, McKissick 83A 100 ton block, (2) 36” and (2) 72” elevator links  Price:  $125,000

FRANKS 1287 WELL SERVICE RIG(Ref#8668Rh)  Manufactured 1975, Model 160, Detroit Series 50 diesel engine, Allison 750 transmission, disc assist brake, 96’ x 185,000# mast, McKissick 100T block, fold down walkways and work platform, mounted on 4 axle carrier  Price:  $295,000

FRANKS 1058(Ref#121R)  38x10 drawworks, 4 axle Crane Carrier, 6V92 Detroit diesel engine, 4460 Allison tranmission, 96’ x 133,000# mast with 4 lines, no block, no sandline, no rod board, no monkey board, needs a little work  Price:  $94,500

FRANKS SINGLE POLE RIG(Ref#14001T)  Built 1966, Double drum 1058 drawworks, sandline has 5/8” line, 75 ton blocks on tubing drum, 10 x 13 single pole, 6V471 Detroit engine, standard transmission, 3 axle carrier, good tires, misc parts and accessories including chains, seals, old style oiler, sitting since 2016, running when parked, includes spare parts.   Price:  $47,500

FRANKS 1058 WELL SERVICE RIG(Ref#2763T)  Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field  Price:  $295,000

FRANKS WELL SERVICE RIG(Ref#5649T)  Built 1966, Double drum 1058 drawworks, 8500’ sandline, blocks, 96’ x 150,000# derrick, mounted on 4 axle carrier, Detroit 6V92T replaced August 2019, PTO, power steering and alternator/generator needs modifications to work with new Turbo diesel engine

FRANKS EXPLORER II(Ref#256Tb)  70’ telescoping mast, single tubing/double rod, Detroit engine, Allison auto transmission, mounted on 3 axle carrier  Price:  $52,500

FRANKS SERVICE RIG(Ref#256Tc)  70’ telescoping tri-scope mast, single derrick, brand new right angle drive, Cummins engine, manual transmisison, mounted on 4 axle carrier Price:  $37,500

FRANKS EXPLORER(Ref#13106R) Manufactured 1968, completely rebuilt 2011, workover rig, PTO, mounted on CCC with 6V71 Detroit engine, doghouse  PRICE:  $97,500

FRANKS 658(ref#8271Tb)  Manufactured 1978, 96’ x 180,000# mast, mounted on Pemco carrier with Cummins engine, PTO, complete with tools  Price:  $79,500

FRANKS 658(Ref#8271Tc)  Manufactured 1972, 96’ x 180,000# mast, mounted on Pemco carrier with Cummins engine, PTO, no tools  Price rig only:  $54,500

FRANKS 658(Ref#8133Tb)  Manufactured 1964, double drum, double/triple 4 post derrick, 96’ x 180,000#, mounted on 5 axle 1964 Wilson Crane Carrier, Detroit 8V92 and automatic transmission in rig have 20 hours since rebuild  Price:  $215,000

FRANKS 658(Ref#8133Ta)  Manufactured 1962, double drum, tri-scope single/double 72’ tall derrick 140,000#, 671 Detroit diesel, mounted on 3-axle Crane Carrier  Price:  $165,000

FRANKS 658 WELL SERVICE RIG(Ref#14894T)  Double drum drawworks with hydromatic brake, 96’ x 180,000# triscope derrick, mounted on 4 axle RMI carrier with hydrulica support legs, 8V92N Detroit, 5860 Allison transmission, Spicer 784 split shaft gear box, 250 hp right angle drive, 650’ of 7/8” tubing line, 8000’ of 9/16” swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84” links, 2-3/8” and 2-7/8” tubing elevators, BJ tubing slips, D&D power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches and transfer, rod fishing tools, misc hand tools and connections    Price:  $137,500

FRANKS 658 SERVICE RIG(Ref#3070N)  Manufactured 1976, double drum drawworks,  double triple 96’ x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000’ 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000’s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. PRICE:  $115,000

FRANKS 658 D/D WELL SERVICE UNIT(Ref#1683Rh)   CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96"H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform.  Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires  Price:  $300,000

FRANKS 658 WELL SERVICE RIG(Ref#14893T)  Double drum drawworks with hydromatic brake, 10” brakes, 96’ x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650’ of 7/8” tubing line, 8000’ of 9/16” swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84” links, 2-3/8” and 2-7/8” tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections  Price:  $140,000

FRANKS 658 SINGLE POLE PULLING UNIT(Ref#8742T)  Manufactured 1960, Double drum, all air operated, 7/8” drill line, 9/16” sandline, 60’ single pole 10 x 13, mounted on Franks 3 axle carrier, will handle 8000’ of 2-3/8” tubing or 6000’ of 2-7/8” tubing, tools include tongs and handling tools, good condition  Price:  $69,500

FRANKS 500 WORKOVER RIG(Ref#7615Tc)  Built 1980, refurbished 2018, 102" x 250,000# mast, mounted on 5 axle carrier, new engine and transmission, 150 ton blocks, 15,000’ sandline, ready to work  Price:  $495,000

FRANKS 400 WORKOVER RIG(Ref#7615Tb)  Built 1982, refurbished in 2018,102" x 215,000# mast, mounted on 4 axle carrier, new engine and transmission, new drilling line, no sand line, 100 ton blocks, 2 winches, has not worked since refurbishment  Price:  $405,000

FRANKS 350 WORKOVER RIG(Ref#7959Tb)  Manufactured 1983, 4 legged workover rig, 96’ mast, PTO, mounted on Franks carrier with Detroit 60 Series engine, 100 ton blocks (spring loaded), 14,000’ of ew 9/16” sandline, 1” drill line, good tires, good condition, ready to work  Price:  $185,000

FRANKS 300 SERVICE RIG(Ref#1021Tb)Manufactured 1982, 1287/160 DDHT, 96" x 215,000 hook load inspected mast, 122" hydromatic, Detroit 60 series engine (7500 hours), 750 5 speed Allison transmission, mounted on 4 axle carrier, 2 winches, work floor  Price:  $325,000

FRANKS 300(Ref#13700R) self propelled double drum back-in, DDEC IV-60 series engine, rated capacity 4200m with 73mm tubing, Franks 96-215 derrick, rated at 95000 daN, Sowa 100 ton traveling blocks, 25.4mm x 300m wire rope drilling line, 14mm x 3700m sandline, racking capacity 4200m – 73mm double tubing 4700m 19mm triple rods  Price on Request

FRANKS 300 D/D 1287(Ref#1683Rm)  Hydromatic brake, Well Service Unit p/b DETROIT 8V-71 Diesel Eng, ALLISON 750 Trans, (Reman Dec 2011) FRANKS 71’H 150,000# Tri-Scope Telescoping Mast, Hydraulically Raised &, Sgl Tubing & Dbl Rod Boards, Adjustable Height Work Platform, Mtd on FRANKS Explorer III 4-Axle Carrier w/Sgl-Man Cab, (2) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls & Floatation Front Tires  Price:  $250,000

FRANKS 300 SERVICE RIG(Ref#1169Ta)  4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition  Price:  $37,500

FRANKS 300 SERVICE RIG(Ref#1169Tb)  Series 60 Detroit engine, 750 Allison transmission, mounted on 4 axle carrier, block removed, drill line removed, cat line winch removed, some controls removed  Price:  $19,500

FRANKS WORKOVER RIG(Ref#7682T)  Triple drum, 8-5/8 x 7” pole, telescopes to 44’, sand pump, bailer, mechanical clutch, mounted on Ford tandem axle truck with diesel engine, truck runs but not recommended to drive long distance Price:  $27,500

FRANKS WORKOVER RIG(Ref#6692R)  Manufactured 1969, free standing, 8100 hrs left on level IV, 8V71 Detroit diesel, 42 x 10 main drum, 38 x 8 sandline drum, 4 axle carrier, A-legs need to be welded back on, derrick is off unit, single/double mast    PRICE:  $120,000

FRANKS EXPLORER III(Ref#883N)180,000 lb Derrick, Double Triple 96" Derrick, Single Drum Drawworks, Detroit 8V71 w/ Allison, 4 line speed block No swivel, Peckamatic Tongs, Guiberson Double 3000# BOP, Rod & Tubing Elevators & Tools, New 1" Drill Line (560"), New 5/8 Cat Line, New Tong & Rod Lift Line, New Tires, New Drive line , U Joints & Third Member, New Hydraulic Pump w/ Eaton Air Clutches, All new Brake Cans, Tubing Board, New Battery, Starter & Gauges, Most air & hydraulic line has been replaced, Rebuilt Drawworks with all new Clutches, Bladders and Bearings   Price for rig only:  $450,000   Price with tools:  $500,000

FRANKS 300 EXPLORER III 1287-160 TD-HT WELL SERVICE RIG(Ref#5482T)  Built 1979, 65’ 10” x 13” poles hydraulically raised, block line, sandline, winch line,  hydromatic brake, new Detroit 8V71 engine and new Allison 750 transmission, mounted on 4-axle carrier with single man cab, hydraulic leveling jacks, hydraulic utility hoist, air and hydraulic control and floatation tires, sand pump, two bailers, fully tooled  Price:$94,500

FRANKS 44(Ref#11650T)  Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling  Price:  $52,500

FRANKS 844 DOUBLE DRUM WORKOVER RIG(Ref#12395R)  Single double derrick, double drum, Detroit 6V71 engine, mounted on Franks carrier, 125,000# derrick, sandline, ready to work  Price:  $195,000

FRANKS 844/80 DOUBLE DRUM SERVICE RIG(Ref#6708Ra)  Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily  Price rig only:  $157,500

FRANKS 44 DOUBLE DRUM BACK-IN WORKOVER RIG(Ref#15724)  double drum, air clutches, working line 7/8”, 54’ x 80,000# hydraulically raised mast with racking board, mounted on tandem axle rear carrier powered by GMC 671 diesel engine, worked 4000’ wells   Price:  $100,000

FRANKS 4-LEGGED DOUBLE TRIPLE PULLING UNIT(Ref#6720T)  Manufactured 1984, 215,000# derrick,  mounted on 1984 5-axle carrier with 8V92 Detroit engine, 6-speed Allison transmission, 2 rear leveling jacks, recently painted, tooled for 2-3/8 and 2-7/8 tubing, including tongs, slips, bails, elevators, no hand tools, currently working  Price:  $93,500

FRANKS 33 WELL SERVICE RIG(Ref#738T)  10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head  Price:  $242,500

FRANKS KC-54H(Ref#404N)  double drum, mounted on 1975 Chevy truck with 453 Detroit diesel engine, Franks Model 44 PTO, 4 x 5 piston mud pump, 6 – 8” opening on rotary table, hydraulic pull down, 3 hydraulic jacks, rig only, 300" of 20" drill pipe   PRICE:  $37,500

FRANKS KC-38 ROTARY DRILLING RIG(Ref#10792R) mounted on 1971Ford F600 2 wheel drive with gas engine, 5x6 mud pump, 20’ Kelly 5 ¼” stationary table, mechanical clutches, no pulldown, no breakout, no leveling jacks, stabilizer, drill bits, subs, 600’ of  20’ x 2 3/8” drill pipe, many spares  Price:  $27,500

FRANKS KC20(Ref#8218)Manufactured 1962, 3 x 4 centrifugal pump, 3-1/8 x 14’ kelly, 4-1/4 table, mounted on International B160 truck with 263 3 cyl engine (overhauled)   Price:  $24,500

FRANKS KF50(Ref#10744T)  3 drum drawworks, mechanical clutches, Spicer air shift PTO, 2 rear hyd leveling jacks, 8” retractable table, 3-1/2” x 24’ square kelly, 2” Little Giant swivel, new 3 x 4 Mission mud pump, hydraulic pulldown, mounted on 1993 Freightliner truck with Cat 3406 engine, approximately 400’ of 2-7/8” full hole drill pipe  Price:  $62,500

FRANKS FJ5(Ref#6899)  Double Drum drawworks (3 lines), 100 SDS compressor, mounted on 6 x 6 Crane Carrier powered by Cummins 270 diesel engine, 3 hydraulic leveling jacks, floatation tires, 5 x 6 Gardner Denver duplex mud pump, 4-1/2” kelly,Giant swivel, 2” pulldown chain, sandline, uses 15’ drill pipe, pipe rack, 8-1/2” rotary table, driller’s platform, stand pipe in derrick, 2000’ machine  PRICE:  $72,500

FRANKS FA(Ref#9139N)  Manufactured 1950’s, New 5 x 6 Gardner Denver mud pump, hydraulic pulldown, auto chuck, mounted on 1975 Chevy with gas engine, PTO, freshly painted, needs new hydraulic lines, brake cylinders, 300’ of 2-3/8” x 20 N rod,  Price:  $25,000

FRANKS / MAINLAND WORKOVER RIG(Ref#5133Na) Mainland M80, manufactured 1971, heavy duty drawworks, holds 14,000" 9/16" sandline, holds 7/8 mainline, 76’ x 180,000# hydraulically raised mast, mounted on Mainland 4 axle Carrier, powered by new Detroit Series 50 diesel engine and leveling jacks, clean condition

MAINLAND M32 SERVICE RIG(Ref#11674Tg)  69’ x 140,000# striff mast, 32 x 7 double drum drawworks, 2 aux deck winches, mounted on 4 axle carrier, Detroit 6V71 diesel engine, Allison HT750 automatic transmission, tubing board, rod basket, cat walks, railings, stairs, ladders, lights, floor, BOP controls, accumulator bottles, 6 sheave crown, 75 ton McKissick tubing block  Price: $105,000

WORKOVER RIG(Ref#123T)  Manufactured 1983, 70’ x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier.  Rig runs and truck drives, stacked for several years, good condition  PRICE:  $93,500 USD

WAGNER MOREHOUSE WELL SERVICE RIG(Ref#7837T)  350 GM deck engine, mounted on 1986 GMCtruck, 454 GM engine, sandline, approx 50’ mast, no cathead, can pull single  PRICE:  $29,500

Dragon manufactures a full line of 300 to 1,000 HP Cooper ™ Rigs at our state-of-the-art U.S. facility and our rig team is one of the most seasoned in the industry. Whether you need a used well servicing rig, a workover rig, a drilling rig, mud pumps and systems or parts and service, Dragon has you covered.

Our expansive inventory of parts and accessories includes mud systems, mud hoppers and mud guns, agitators, pipe racks, draw works, API 4F, 4th Edition certified masts, break blocks, McKissick tubing and drilling blocks and refurbished gear boxes for most brands of well servicing units. Our rig masts have a clearance height range of 71-124′ and capacities of 150,000 lbs too 500,000 lbs.

Like all Dragon equipment our used Cooper Workover Rigs are severed duty engineered. We also have hands-on experience building to severe, cold weather specs and in compliance with the state of California’s requirements. When you buy a Cooper™ Rig from Dragon you get a custom, easy to operate, safe rig at a competitive price. Whatever mobile rig solution you need, Dragon will build it, deliver it and back it with the highest level of service and support in the industry.

The 844 TD-HD Workover Rig by Franks has a 3/4″ Tubing Line, Air Clutches and is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.  The 844 TD-HD Workover Rig is in excellent working condition, has a current OK Tag and clean Title.

Franks 844 TD-HT draw works with   3/4″ Tubing Line. New Air Clutches have been added to the draw works and it is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.

Performance proven main drum draw works assemblies are modular construction for versatile rig assembly. Designed to allow maximum parts interchangeability and easy add-on features to customize this for your specific operation.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.