parts of a workover rig for sale

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Dragon manufactures a full line of 300 to 1,000 HP Cooper ™ Rigs at our state-of-the-art U.S. facility and our rig team is one of the most seasoned in the industry. Whether you need a used well servicing rig, a workover rig, a drilling rig, mud pumps and systems or parts and service, Dragon has you covered.

Our expansive inventory of parts and accessories includes mud systems, mud hoppers and mud guns, agitators, pipe racks, draw works, API 4F, 4th Edition certified masts, break blocks, McKissick tubing and drilling blocks and refurbished gear boxes for most brands of well servicing units. Our rig masts have a clearance height range of 71-124′ and capacities of 150,000 lbs too 500,000 lbs.

Like all Dragon equipment our used Cooper Workover Rigs are severed duty engineered. We also have hands-on experience building to severe, cold weather specs and in compliance with the state of California’s requirements. When you buy a Cooper™ Rig from Dragon you get a custom, easy to operate, safe rig at a competitive price. Whatever mobile rig solution you need, Dragon will build it, deliver it and back it with the highest level of service and support in the industry.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Well Service | Workover Rigs - 844/80 Double drum draw works. looks to be recently rebuilt. Has new Lebus Grooving on Tubing Drum. Comes w/ 250 HP 2 speed jackshaft/RA BOX. More Info

Well Service | Workover Rigs - CARDWELL KB200B Freestanding Oilfield Workover Rig / Service Rig / Pulling Unit, Service Rigs, Used Cardwell KB200B Freestanding Service Rig, 5 Axle Carrier, Detroit 8V71... More Info

Well Service | Workover Rigs - WELL SERVICE RIG - COOPER 350 Well Service Unit p/b DETROIT 8V-92 Diesel Eng, ALLISON 750 Trans, 42X12-38x8 DRAWWORKS w/dual disc assist, 97’ 200,000# Telescoping M... More Info

Well Service | Workover Rigs - CROWN 350 SERIES -- SERVICE KING 104" 205,000# DERRICK, CAT3406, ALLISON 5860,38X10 DOUBLE DRUM DRAWWORKS, CROWN SHEAVES REBUILT 2013 MAIN26”X4,SANDLINE 22”, NE... More Info

Well Service | Workover Rigs - 2008 Crown/Cabot 1058 Service unit mounted on 4 axle carrier w/Detroit 60 Power. New 5860 Drop Transmission. 72" Double rod/single tubing Derrickmast 125000# Rig is in Ex... More Info

Well Service | Workover Rigs - WELL SERVICE RIG - FRANKS 1287-160-DTD-HT D/D Well Service Unit p/b DETROIT 8V-71N Diesel Eng, ALLISON CBT-4460-1 Trans. SERVICE KING 96" 180,000# Hydraulically Raised & ... More Info

Well Service | Workover Rigs - FRANKS 300 D/D 1287 w/hydromatic brake, Well Service Unit p/b DETROIT 8V-71 Diesel Eng, ALLISON 750 Trans, (Reman Dec 2011) FRANKS 96’H 150,000# Tri-Scope Telescopin... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b CAT 3406 Diesel Eng, ALLISON HT-750 Trans, FRANKS 96’H 180,000# 4-Leg Telescoping Mast, Hydraulically Raised & Scoped w/4-Sheave... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b Series 60 Detroit Diesel Eng, ALLISON 5860 Trans, 102’H 225,000# (on 4 line) Telescoping Mast, Hydraulically Raised & Scoped, Db... More Info

Well Service | Workover Rigs - IDECO H35 96̢۪ 210,000 MAST, DETROIT 60 SERIES ENGINE, ALLISON 5860 TRANSMISSION, REFURB 2005, IDECO DERRICK REPLACED WITH NATIONAL DERRICK, TUBING DRUM CON... More Info

Well Service | Workover Rigs - IDECO RAMBLER H-35 Oilfield Workover Rig / Service Rig / Pulling Unit, Service Rigs, Used Ideco Rambler H-35 workover rig / service rig / pulling unit, 4 axle carrier, De... More Info

Well Service | Workover Rigs - 2015 INTERNATIONAL PAYSTAR 5900 Flushby Unit. C/w 2003, Refurbished in 2015, Western Fab Ltd. flushby unit, s/n 03-09-1008, 50 Ft. Mast height, 50,000 lb. pull rating, fr... More Info

Well Service | Workover Rigs - 2005 KENWORTH T800 Flusby Unit. C/w Lash Ent. flushby unit, 47 ft mast, slant compatible, 3x5 Gardner Denver triplex pump, 5000 psi, 2005 Advance 8m3 tank, TC 406 code, P... More Info

Well Service | Workover Rigs - 2003 KENWORTH T800 Flushby Unit. c/w Online flushby unit, 47 ft. mast, slant compatible, Pullmaster HL25 wotking winch, Pullmaster PL5 catline winch, 2002 wabash two comp... More Info

Well Service | Workover Rigs - 2005 KENWORTH T800B Flushby Unit. c/w Online flushby unit model 50-50, s/n 24641, 40 ft. mast,Salnt compatable, Pull master HL25 and PL5 winch, Gardner Denver 3x5 triplex... More Info

Workover Rig is available for both onshore as well as offshore Workover purposes at affordable prices. There are a number of companies that manufacture the Workover Rig as well as Rig packages that are required for different kinds of drilling jobs and meet the standards that have been set by the American Petroleum Institute or the API. The Rig packages are shipped worldwide. The rigs are included other than the simple Workover and they include the following:

Workover Rig is known as the Workover the different types of rigs include the offshore and onshore Rig that range from 150 horsepower to 1000 horsepower. Workover rigs have a surface depth that is equipped with diesel engines and transmissions and is available from 8000 ft to 30000 ft. Workover rigs contain a full line of drilling packages. Rig takes into account the skid mounted drilling rigs and the ones that are trailer mounted. Workover skid mounted drilling rigs incorporate the diesel-electric AC/VFD or the DC/SCR drive rigs, mechanical drive rigs and the combination drive Rig that ranges from 1000 horsepower to 6000 horsepower; while the trailer mounted Rig ranges from 450 horsepower to 1000 horsepower.

A lot of Workover Rig uses the double telescopic mast with the help of a single mast and is operated by wide wheel base axels, high strength steel beam, low cross section tires, dual pipeline brakes as well as hydraulic assist steering for the Workover. Rig mast is a double section type and uses a telescopic mast for dual safety protection. The gear shift and throttle of the engine can be remote controlled.

Workover types of Rig are available in the form of the single drum as well as the double drum. The groove ensures the alignment of in place as well as for long life. The optional Workover accessories for the auxiliary brakes include air thrust disc type clutch, brakes for the braking of the main drum, forced water circulating cooling with the brake rims as well as the optional brakes. Workover rigs are centrally controlled with electricity. The other kinds of drilling equipment include drilling equipment, triplex mud pumps, well control equipment; solids control equipment, oil control tubular goods and quality equipment. Work over rigs run casing tools and clean outs inside and outside a hole already drilled.

The 844 TD-HD Workover Rig by Franks has a 3/4″ Tubing Line, Air Clutches and is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.  The 844 TD-HD Workover Rig is in excellent working condition, has a current OK Tag and clean Title.

Franks 844 TD-HT draw works with   3/4″ Tubing Line. New Air Clutches have been added to the draw works and it is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.

Performance proven main drum draw works assemblies are modular construction for versatile rig assembly. Designed to allow maximum parts interchangeability and easy add-on features to customize this for your specific operation.

The mast is constructed with an 8 X 10 Double Pole design with 70 ft height.  The mast design and construction aids the operator in quick and easy set up on site and keeps a lower profile while moving down the road for transport.

Includes tubing tongs, elevators,  McKissick block and basic tools.  Unit is in excellent working condition, has a current Oklahoma Registration Tag and clean Title.

This unit is mounted on a Cabot Explorer carrier designed specifically for oilfield equipment. Rugged walking beam suspension, double reduction rear tandem with Bendix powered air brakes.

Jereh truck/trailer mounted workover rig is mechanically and hydraulically driven. The power system, drawworks, mast, travelling system and transmission mechanism of the workover rig are mounted on the self-propelled chassis, which improves the moving efficiency greatly. Now, Jereh truck mounted workover rig series cover the workover depth from 2500m to 7000m and drawworks power from 250HP to 1000HP, featuring high operation load, reliable performance, excellent off-road performance, convenient movement and low operation/moving cost. Besides, workover rigs for arctic, desert and highland applications are available.

A quick search for oil drilling rigs spare parts from wholesalers online is a great way to find replacement parts for other buyers. Oil drilling rigs spare parts are also available from a number of wholesalers online. For instance, C2D oil drilling rigs spare parts and clutch disbements are often available.

Buy wholesale oil drilling rigs spare parts from a wide range of suppliers on Alibaba.com. Oil drilling rigs spare parts and accessories are available when you buy from a wide range of wholesalers. The wide variety of oil drilling rigs spare parts and accessories are available when you buy from a wide range of wholesale oil drilling rigs suppliers. Alibaba.com offers a wide variety of oil drilling rigs spare parts and accessories from a wide range of suppliers. Oil drilling rigs spare parts and accessories are available for you and your customers. From oil-based drilling rigs with spare parts and accessories at a great price point, you can source a great variety of oil drilling rigs at Alibaba.com. The wide range of oil drilling rigs spare parts and accessories are available at a great price. Find different suppliers and suppliers on Alibaba.com. Oil drilling rigs spare.

Used drilling rigs spare parts are often available for used drilling rigs as replacement parts. It is important to know that these used drilling rigs are replacement parts for many. Be it after the manufacturer of dred rigs, oil well drilling rigs no longer have to be purchased and used as a part of the industry. Spare Parts Unfortunately is not a chance for many used drilling rigs spare Parts Unfortunately, it is hard to know that oil drill rigs no longer have to be used for many used drilling rigs are spare parts from the wholesalers. Areas that are sold from the manufacturer of dred rigs are also available from the wholesalers. Depending on the manufacturer of Dred Rigs and Specifications, it is important to know that oil drilling rigs have spare parts that are not suitable for used drilling rigs.

Oil drilling rigs are essential parts of many industries. Are you looking for oil drilling rigs spare parts? Oil drilling rigs spare parts like engine and capacitors are avoided when you buy oil drilling rigs with spare Parts Are You Sharper"s oil drilling rigs are essential parts of the industry. Are you looking for replacement parts for oil drilling rigs with spare parts? These in factensive drilling rigs are made with engine and capacitors, Alibaba.com"s oil drilling rigs spare parts are a must-have for business. You can find engine and tanks for oil drilling rigs with spare parts for many other types of oil drilling rigs, such as engine, piston, and capacitors are rely on to replace them. Are you looking for replacement parts for oil drilling rigs with spare parts? The wide range of oil drilling r.

Some parts that you supply can last a longer time. Spare parts are supplyed directly to the wear and tear of the engine. Other parts, such as torch and fuel, are essential to know the engine and the engine. Spare Parts Often a good quality parts is made for quality drilling rigs, which have a long-lasting life.

There are two types of oil drilling rigs: deep water drilling and deep well drilling. Deep water drilling rigs are deep water drilling rigs and deep well drilling rigs. These drilling rigs are mobile water drilling rigs that are built with high-perure components and are used to make different choices. The deep well drilling rigs are deep water drilling rigs with long beam bore, and deep well drilling rigs. These drilling rigs are deep water drilling rigs and are open water drilling rigs. The deep water drilling rigs are open water drilling rigs, which are made with high-performance components and are used as well. On drilling rigs are deep water drilling rigs, deep water drilling rigs and deep water drilling rigs.

What is the Torque Oil Drill Stabilizer? As the name suggests, there are three types of torque Oil Drilling Stabilizers: Thequeque Oil Drilling Stabilizers The torque oil drilling Stabilizer class produces two types of torque oil drill stabilizers. The two types of torque oil drilling stabilizers are designed to increase the torque of the fuel in the drill system. The torque fuel drill stabilizer class is a class of drill drill that utilizes the drill force as well. The amount of torque fuel in the drill stabilizer class is the same as the other types of oil drill stabilizers. These types of drill drill stabilizers are designed to utilize the torque of the drill drill. The amount of torque fuel used in the drill is discharged with a series of dischargeions. These types of drill drill stabilizers.

There are two types of oil drilling rigs for each client: hydraulic drilling rigs and on-site drilling rigs. These are drilling rigs that are used for off-road work, as well as for off-road work in the construction industry. hydraulic drilling rigs are the most common types of oil drilling rigs and they are used to place on the construction site.

Founded in 1969, RG Petro-Machinery Group Co., Ltd. is the manufacturing base of Chinese major technical equipment and fast move petroleum drilling rigs. At present, it has 12 subsidiaries with 9 production and supporting branches. Its main products include 12 series of more than 200 varieties, such as truck-mounted drilling rigs, skid-mounted drilling rigs, trailer-mounted drilling rigs, workover rigs, oilwell logging equipment, and integrated automatic well service equipment.RG Group has established a complete scientific and technical research and development system. It has academician workstation, post-doctoral scientific research workstation, and the National Petroleum Truck-mounted Equipment Standardization Work Department. It is responsible for hosting in drafting the national petroleum and petrochemical industry truck-mounted equipment standards. It has a nationally recognized enterprise technology center and metrology inspection laboratory, and has strong machinery fabrication and system integration capabilities. The company has passed ISO9001 and API Q1 international quality system and been authorized to use API 4F, 7K, and 8C monograms since 1990s.RG provides the oil and gas drilling equipment and all-round services according to the demands of the customers globally, including drilling services, equipment maintenance services, engineering services, inspection services, and equipment leasing etc. RG Petro-Machinery Group Co., Ltd. makes the great efforts to provide the first class equipment and services for the oil and gas industry of China and the world.

Find durable and best quality workover rig parts at affordable prices only at Tradechina.com. To improve the efficiency and quality of cementing, workover rig parts are vital pieces of equipment, which is why you must not compromise on their quality. It seals the casing to the wall completely, and the whole job would be unsuccessful if the casing touches the hole at any part.

On Tradechina.com, you can find a wide range of workover rig parts, which is a key element in ensuring that the cementing quality is optimum. It does so by stopping mud entry and substandard isolation of zones. There are basically four sizes depending on their shapes. The bow spring is most suited for vertical wells and because of its flexibility, it can go through narrow holes. The rigid types are made using cast iron or steel bars, which means they’re perfect for a specific size.

The semi-rigid types combine the property of the bow springs and the rigid types. They can be compressed like the bow springs while have high restoring forces like the rigid types. The mold-on blades are made using carbon fiber and ceramic materials and can be readily applied to the casing surface. Restoring force is an important criterion that decides how effective a workover rig parts is going to be.

At Tradechina.com, you can get the solution to all your needs in one place easily and swiftly. All the workover rig parts are sold by verified sellers, manufacturers and suppliers, which ensures that you always get the maximum satisfaction.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

WILSON WELL SERVICE RIG  (Ref#3000Ta)  103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR

Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread  7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch.  Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations.  Price:  $265,000

Built 2012, 42 x 12 drawworks, Cat C15 (475 hp) engine,  112’ x 300,000# derrick, mounted on 5 axle carrier.  Includes skid mounted Gardner Denver PAH mud pump with Detroit 8V92 engine (gear end is good, but needs fluid ends machined or replaced).  Package Price:  $270,000

Manufactured 2014, 72’ x 180,000# derrick on 4-line (250,000# on 6-line), mounted on 5 axle carrier, Detroit Series 60, Allison transmission, all hydraulic, 8000’ of 5/8” sandline, 100 ton McKissick casing blocks, 1” line 42” x 12” casing drum, 42” x 12” sand drum, disc assist on casing drum, 1500 hours, 3000 miles.  Westco power tongs 1-1/2”, 2”, 2-7/8” and 5-1/2”, set of bails/links, tubing elevators 1-1/2” – 2”, rod hook, elevators, wrenches, swab tools, Martin Decker weight indicator, stored inside  Price:  $645,000

Built 2005, 104’ x 225,000# telescopic double free-standing mast, 42” x 10” drawworks, 38” x 8” sandline, Detroit Series 60 engine, Allision 5860 transmission, mounted on 5 axle carrier tandem steer/tri-drive, Level IV completed in 2014 (16,270 CAODC mast hours remaining)  Price:  $755,000 CDN (approx. $600,000 USD)

Built 1981, mounted on 5 axle carrier, Detroit 60 Series engine, 104’ x 250,000# mast, 5860 Allison 6 speed transmission, 100-ton McKissick spring loaded blocks, 2 winches, blocks, all lines, drill line, approx. 13,000’ of 9/16” sandline, all guy lines, load lines, belly lines, floor lines and 2 winch lines all with current tags, currently working, excellent condition  Price:  $320,000

Derrick fell onto rig when being raised, derrick would need to be replaced or repaired.  Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake.  Extra rebuilt 3408 Cat engine.  Price as is:  $112,500

Built 2010, Detroit 60 Series engine, 5860 Allison transmission, 103’ x 250,000# mast, double triple, 2 winches, McKissick 100-ton spring loaded blocks, all lines, drill line, approx 13,000’ of 9/16” sandline, all guy lines, load lines, belly lines, floor lines and 2 winch lines all current tags.  Excellent condition, currently working.  Price:  $420,000

Chinese built 2006, 8300 hours, 104’ x 250,000# derrick, rod basket and tubing board (18000’ tubing capacity), Detroit Series 60 diesel engine, 5680 Allison 5-speed transmission, sandline drum with 14,500’ 9/16” sandline (new January 2022), main drum with 1’ drill line on 6 lines with conventional brake pads and brake assist (new November 2021), brand new winch line (replaced May 2022), mounted on 6 axle carrier (2 steer, 2 drive and 2 tag), total weight 100,000 lbs., currently working  Price:  $270,000

Manufactured 1981, 400 CCC drawworks, single 22” Hydromatic, 96’ x 215,000# CCC derrick (level 4 inspected 2015), mounted on 5 axle carrier, Detroit 60 Series 14 liter engine, Allison 5860-2 drop box,  1 winch, work floor, McKissick 83 block, 72” links, BJ RS tubing tong with manual backup, pad type weight indicator, 2 7/8 – 2-3/8 100 ton, 14,000’ 9/16 sandline capacity, 875’ 1” drill line,   Price:  $395,000

Rebuilt 2010 to Level IV, Double drum drawworks, Detroit 6V53 diesel engine, Allison 5860 3-speed transmission, 60’ x 100,000# stiff mast derrick, 4 lines with 4’ well spacing, 35-ton McKissick block and hook (2) 17” sheaves 7/8” wire, 75-ton elevator bails with 25-ton elevator pickup adapter, working floor, stairs, handrails, lights, 20’ lubricator, 5000 winch with hook, tandem axle single steer drive carrier, located Canada  Price:  $120,000 USD

Manufactured 2008, 72’ x 150,000# derrick, Detroit Series 60 engine, mounted on 4 axle Crane Carrier, tooled out, Guiberson T60 air slips 100 ton casing blocks, Westco power tongs, currently working   Price:  $445,000

Double drum, 15,000’ of new 9/16” line, near new 4-line blocks, mounted on 5 axle Crane Carrier, 104’ x 250,000# mast, 750 Allison transmission, Detroit 60 series, currently operating  Price:  $130,000

Manufactured 1981, mounted on 5 axle carrier, double triple service rig, 96’ x 250,000# derrick, Detroit Series 60 12.7 diesel engine, Allison transmission, 9/16” sandline, 1” drill line,  hydraulic jacks, hydraulic catwalk, travelling block, tubing bard, rod basket and all necessary lines.  Tooling not included.  Price:  $115,000

Rebuilt 2010, double/triple, 8V92 Detroit with Turbo charger and after cooler, trailer mounted, single drum drawworks, Allison transmission 588 Series, 102’ x 225,000# derrick, gooseneck 3 axle trailer

Manufactured 1983, double drum, 96’ x 180,000# derrick, mounted on 5 axle carrier with 92T engine, Allison transmission  Price rig only:  $300,000  Price with tooling:$340,000

WILSON 42 WELL SERVICE RIG(Ref#7562Ta)  Manufactured 1975, 180,000# Pemco double/triple derrick, mounted on Wilson carrier with Detroit 8V71 engine, 4 hydraulic leveling jacks, ready to work  Price rig only:  $74,500  Price with tooling:  $94,500

Manufactured 1983, 70" x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier.  Rig runs and truck drives, stacked for several years, good condition  Price:  $93,500 USD

110’ x 250,000# Cooper derrick, Detroit 60 Series engine, 6061 Allison transmission, 6 axle Pettibone carrier, 3 front and 3 rear axles, drop box converted to air control, tubing drum, sand drum, 24” Wichita clutches  Price:  $315,000

Manufactured 2009, Detroit 60 Series engine, 96" x 225,000# mast, mounted on 5 axle carrier, blocks, elevators, air slips, one owner  Price:  $420,000

Manufactured 2009, 96" x 205,000# derrick, TI 260 drawworks, 48" sandrum brake, 9/16" sandline, 1" Lebus grooved tubing drum, 60" turbing drum brake size, 41,500# max single line pull Price:  $425,000 PRICE REDUCED: $389,500

FRANKS 500 WORKOVER RIG(Ref#7615Tc)  Built 1980, refurbished 2018, 102" x 250,000# mast, mounted on 5 axle carrier, new engine and transmission, 150 ton blocks, 15,000’ sandline, ready to work  Price:  $495,000

Built 1982, refurbished in 2018, 102" x 215,000# mast, mounted on 4 axle carrier, new engine and transmission, new drilling line, no sand line, 100 ton blocks, 2 winches, has not worked since refurbishment  Price:  $405,000

Manufactured 1982, 1287/160 DDHT, 96" x 215,000 hook load inspected mast, 122" hydromatic, Detroit 60 series engine (7500 hours), 750 5 speed Allison transmission, mounted on 4 axle carrier, 2 winches, work floor  Price:  $325,000

FRANKS 300 SERVICE RIG(Ref#1169Ta)  4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition  Price:  $37,500

Series 60 Detroit engine, 750 Allison transmission, mounted on 4 axle carrier, block removed, drill line removed, cat line winch removed, some controls removed  Price:  $19,500

Manufactured 1980, (2) Cat C13 engines, Allison transmission on 6 axle carrier, 108" x 300,000# mast with mast lights, single 2042 drum drawworks with water cooled brake, 2 hydrraulic winches  Price:  $170,000

Manufactured 2004, Cat diesel engine, 96" x 250,000# mast, mounted on 5 axle carrier, blocks, elevators, air slips, needs new air lines  Price:  $170,000

Manufactured 2007, double drum, 104’ x 250,000# mast, Detroit 60 Series engine, mounted on 5 axle Crane Carrier, McKissick 73 150-ton blocks   Price:  $470,000

Double drum Wilson Sr and Wilson JR drawworks, sandline capacity 10000" of 3/16", mounted on tandem axle, 1987 Freightliner tandem axle truck powered by Detroit diesel engine, 2 hydraulic leveling jacks, Detroit diesel on deck, 50" hydraulically raised mast, brand new hydraulic cylinder just replaced for lifting derrick, has pulled a minimum of 3000" wells, all new hydraulics   PRICE:  $137,500

Manufactured 1979, double drum drawworks, Lebrus grooved for 1-1/8" drill line swedged to 1", 9/16" sandlne, Totco 190,000# weight indicator, air clutches, Parmac single hydromatic brake, hydraulic and pneumatic controls, Wilson 96" x 180,000# mast hydraulically raised and scoped, 3-stage raising ram, crown safety platform, double tubing board, triple rod board, ladder, guylines, adjustable working platform.  Wilson tandem axle front, tri axle rear carrier with Detroit Series 60 diesel engine, electric start, radiator, gauges, Allison automatic transmission, air compressor, hydraulic pump, single man cab, Braden hydraulic winch, hyd reservoir, water tank, 4 hyd levleing ajcks, folding walkways, safety rails, toolboxes, McKissick 100 ton block, 84"L elevators, Foster hyd tubing tongs, Gill rod tongs, Cavins Type C tubing slips, 2-7/8" tubing elevators, 2-3/8 tubing elevators, rod elevators  Price:  $245,000

WILSON MOGUEL 42 WELL SERVICE RIG(Ref#3177Tb)  Two available, 96" x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools  Price:  $315,000

Manufactured 1981, Double drum, 96" x 180,000# mast, drawworks brakes and swab brakes both converted to new style brake system, Detroit 60 Series with Allison 5860 tranmsision, 16" double hydromatic brake, 1-1/8" hammered drill line, 9/16" swab line, (2) 6" balls, (5) anchors, 2-1/2" wash pipe with 2" kelly hoist, Oil Country 5500 open face tongues for up to 5-1/2", good tires, mounted on 5 axle carrier  Price:$289,500

WILSON SUPER 38(Ref#3307R)  Double drum drawworks, friction clutches, Foster makeup and breakout catheads, Cummins 250 disel engine, Spicer 4 speed transmission, 70’ cantilever mast, 4-sheave crown block, racking board, mounted on 8’W x 22’L tandem axle trailer with folding walkways, mast base, 4 manual jacks, Budd wheels, National Ideal 75 ton 3-sheave block with hook, Price:  $45,000

Double/Triple 96" x 225,000# derrick, 60 Series Detroit engine, mounted on 4 axle carrier, 750 Allison transmission, sandline, blocks  Price:  $72,500

Built 1980, 102" x 260,000# derrick, factory rebuilt Detroit 8V92T engine installed April 2010, inframe on motor 2015 derrick sandblasted and magnafluxed July 2006, new chain on main drum October 2017, brand new rear end and rear drive line and axels Sept 2016, new drill line and winch line November 2017.

National JWS 185 mud pump, new fluid end 2007 w/ 180 bbl. Flat tank, new charge pump 2014. several jts. Hard line w/5000# guiberson unions, 4-2" 5000# hoses 15" long w/5000# guiberson unions, 6- 2" swivel Chicksans W/5000# guiberson unions

Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity.  Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig.  5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks  Price on Request

42 x 10 – 38 x 8 drawworks, 96’ x 215,000# telescoping mast hydraulically raised and scoped, 60 Series Detroit diesel engine (515 hp), CLBT 4460 Allison transmission, mounted on 4 axle carrier, 4 hyd leveling jacks, 2 hyd utility hoist, new rear axles with new tires, flotation front tires  Price:  $195,000

Year 2006, double drum, 8V71 Detroit diesel engine, 5860 Allison automatic transmission, mounted on 5 axle Crane Carrier, 108’ x 225,000# derrick, 100 ton McKissick 3-sheave block, fully tooled with 6’ bailers, 58-93 tongs, 2-3/8 and 2-7/8 elevators, 3/4 and 7/8 rod elevators and wrenches, eight indicator, laydown floor  Price:  $162,500

Refurbished, Double/Triple, 96" x 215,000# derrick, Detroit 60 Series, mounted on 4 axle carrier, 750 Allison transmission, sandline, blocks Price:  $102,500

Manufactured 1982, Tubing drum 42 x 12, sand drum 38 x 8, Detroit Series 60 diesel engine, 96’ x 200,000# derrick with set of tubing blocks, hydraulic and air hoses gone through, installed all new engine harness and electrical wiring to all lights, transmission.   Rebuilt valve bank  Price:  $200,000

COOPER LTO-350(Ref#3177Ta)  Manufactured 1982, 96" x 200,000# mast, Detroit Series 60 engine, Allison 5860 tranmssion, mounted on 4 axle Cooper carrier  Price:  $315,000

Detroit 8V-92 Diesel Eng, Allison 750 Trans, 42X12-38x8 drawworks w/dual disc assist, 97" 200,000# telescoping mast hydraulically raised & scoped, Mtd on 4-Axle Carrier w/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, tong rack & Floatation Front Tires  Price:  $220,000

Manufactured 1970, double drum, 96’ x 150,000# mast double/triple, refurbished, mounted on 4 axle carrier with Detroit 8V71 diesel engine  Price:$190,000

Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch.  Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed.  But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run.    Price as is: $19,500

Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline  Price:  $225,000

CARDWELL KB200B SERVICE RIG(Ref#11674Ta)  72’ x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission PRICE:  $127,500

Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years  Price:  $92,500

95’ x 212,000# Ideco telescoping derrick, 42 x 10 double drum drawworks, 100 ton McKissick block and hook, hydromatic, tubing board, monkey board, catwalks, railings, stairs, lights, ladders, mounted on 4 axle carrier, Detroit 8V71 diesel engine, Alliston CLT 5860-DB automatic transmission  Price:$137,500

69’ x 140,000# striff mast, 32 x 7 double drum drawworks, 2 aux deck winches, mounted on 4 axle carrier, Detroit 6V71 diesel engine, Allison HT750 automatic transmission, tubing board, rod basket, cat walks, railings, stairs, ladders, lights, floor, BOP controls, accumulator bottles, 6 sheave crown, 75 ton McKissick tubing block  Price:$105,000

104’ x 225,000# telescoping double derrick, 42 x 10 double drum drawworks, hydromatic, 100 ton McKissick block and hook, mounted on tandem steer/tandem drive carrier, Cat 3406T diesel engine, Allison CLBT-5860-2 automatic transmission  Price:$137,500

Manufactured 1991 (not used until 2005), 38 x 10 double drum, p/b 8V92T diesel engine (430 hp), Allison 750 transmission, 18" twin disc cloutches, 48" double disc brake assist on main drum, water mist on both mai and sandline drums, main drum has 7/8" Lebus grooving, 104" x 240,000# mast, tubing board, rod basket, 13,500" of sandline, 875" of 7/8" swedgeline, 100 ton SOWA block, all mounted on tandem axle trailer  Price: $375,000  PRICE REDUCED:  $325,000

1980, 475 hp, single drum (new), reworked, 96" x 205,000# hydraulically raised mast, 6 lines,  crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use   PRICE: $115,000

SKYTOP BREWSTER RR400(Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36" base beam for rig, ready to work  Price:  $110,000

Manufactured 1976, 50 Series Detroit engine, 4460 Allison auto transmission, 96" x 180,000# Skytop derrick, 100 ton McKissick blocks, 7000" of 9/16" sandline, BJ tubing tongs, Guiberson air slips, 2-3/8 and 2-7/8 elevators, rod wrench, rod elevators, weight indicator, lubricator pump, misc tools  Price:  $320,000

72’ x 140,000# hook load telescoping mast, single tubing, double rods, self guyed, 36” x 8” double drum drawworks, Detroit Series 60 engine, Allison 6750 transmission, Level IV in 2005  Price:  $490,000 CDN  (approx. $390,000 USD)

500 hp, manufactured 2007, Pemco 104" x 225,000# derrick, double triple, 100 ton McKissick blocks, BJ style tubing tongs, rod tongs, rod basket, 8"3" bales, 16,993 miles on truck, 4016 hours, all handling tools

Manufactured 1969, double drum,   Lebus grooved for 7/8" drill line and 7/16" sandline, weight indicator, hydromatic brake, air clutches and controls, Loadcraft 104" x 250,000# hydraulically raised and scoped mast, mounted on Loadcraft carrier tandem axle front/tri axle rear, 8V71T Detroit diesel engine, radiator, gauges, hydraulic pump, Allison 4460 transmission, hydraulic reservoir, water tank, air receiver tank, fuel tanks, 4 hydraulic leveling jacks, Hercules 118 deadline anchor, hydraulic winch, McKissick 83A 100 ton block, (2) 36" and (2) 72" elevator links  Price:  $125,000

Detroit 8V-71N Diesel Eng, Allison CBT-4460-1 Trans.  Service King 96" x 180,000# Hydraulically Raised & Scoped W/5-Sheave Crown, Dbl Tubing & Triple Rod Boards.  Mtd On Franks 4-Axle Carrier W/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Floatation Front Tires  Price:  $350,000

Built 1966, Double drum 1058 drawworks, 8500’ sandline, blocks, 96’ x 150,000# derrick, mounted on 4 axle carrier, Detroit 6V92T replaced August 2019, PTO, power steering and alternator/generator needs modifications to work with new Turbo diesel engine

Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field  Price:  $295,000

Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily  Price rig only:  $157,500

38x10 drawworks, 4 axle Crane Carrier, 6V92 Detroit diesel engine, 4460 Allison tranmission, 96" x 133,000# mast with 4 lines, no block, no sandline, no rod board, no monkey board, needs a little work  Price:  $94,500

Double drum drawworks with hydromatic brake, 10" brakes, 96" x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650" of 7/8" tubing line, 8000" of 9/16" swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84" links, 2-3/8" and 2-7/8" tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections  Price:  $140,000

CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96"H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform.  Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires  Price:  $300,000

Manufactured 1974, double drum drawworks,  double triple 96" x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000" 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000"s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED:  $115,000

Refurbished, ready to work, 10 x 8 pole hydraulically raised and scoped, Cat 3208 deck engine, auto transmission, hydraulic swamp winch with all new cable on all winches, 8” brakes with new brake bands, air clutches, hydraulic lines for tongs and air lines for slips, hydraulic jacks, mounted on 1982 Ford 8000 truck with Cat 3208, no tools.  Price:  $59,500

Double drum, double pole 8-5/8" x 7 x65", 6,000" of 2-7/8" line, mounted on 1974 International Model 2070A tandem axle truck with Detroit diesel engine, leveling jacks, 454 Chevy propane engine on deck with 250 gallon propane tank, automatic transmission for smooth operating, Foster 58 power tongs, Guiberso air clips, tooled for tubing and rods, will do 6000" of 7" tubing, currently working    Price:  $89,500

Double drum, 70" pole, 4000" of new line, new power tongs, mud pump, power swivel, new 8.3L Cummins deck engine, mounted on 1979 Mack superliner with 400 Cummins engine, 13 sp transmission, completely tooled, 10 new bits, 4 drill collars, ready to work  Price:  $170,000

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head  Price:  $242,500

Built 1979, 65’ 10” x 13” poles hydraulically raised, block line, sandline, winch line,  hydromatic brake, new Detroit 8V71 engine (installed by Stewart Stevenson) and new Allison 750 transmission, mounted on 4-axle carrier with single man cab, hydraulic leveling jacks, hydraulic utility hoist, air and hydraulic control and floatation tires, sand pump, two bailers, Foster tongs, 2 bailers, sand pump, rod and tubing elevators and all tools  Price:$94,500

Built 1966, Double drum 1058 drawworks, sandline has 5/8” line, 75 ton blocks on tubing drum, 10 x 13 single pole, 6V471 Detroit engine, standard transmission, 3 axle carrier, good tires, misc parts and accessories including chains, seals, old style oiler, sitting since 2016, running when parked, includes spare parts.   Price:  $47,500

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling  Price:  $52,500

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

Manufactured 1960, Double drum, all air operated, 7/8" drill line, 9/16" sandline, 60" single pole 10 x 13, mounted on Franks 3 axle carrier, will handle 8000" of 2-3/8" tubing or 6000" of 2-7/8" tubing, tools include tongs and handling tools, good condition  Price:  $69,500

Triple drum, 8-5/8 x 7” pole, telescopes to 44’, sand pump, bailer, mechanical clutch, mounted on Ford tandem axle truck with diesel engine, truck runs but not recommended to drive long distance Price:  $27,500

Cable Tool Drilling and Completion Rig, 60" double poles rated to 150,000#, 5000" drill capacity, 10,000" pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300" drill line on drum, 3500" on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine  Price:  $72,500

WALKER NEER C34(Ref#8263Ta)  7 x 8 Double Poles, Waukesha 145 on deck, mounted on 1978 Mack with Cummins diesel, screw jacks, includes Doghouse and (1) sting of 4" tools, sitting 1 year Price:  $65,500 - Kansas

WALKER NEER C32(Ref#8263Tb)  Waukesha 135 on deck, chain driven, 5 x 7 double poles, 3 lines, screw jacks, mounted on 1964 tandem axle International truck with V8 gas engine  Price:  $34,500 – Kansas

Also available:  WALKER NEER C32, 5 x 7 double poles, poles bent, has another 7 x 8 pole to include, no motor on deck, mounted on 1981 Mack truck (truck needs replacing) -   Price:  $14,500 - Kansas

Single pole, 3 lines, Waukesha deck engine locked up engine needs replacing or rebuilding, mounted on 1972 Chevy 2-ton truck, screw jacks been sitting for years  Price:$25,500 - Kansas

400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good.  Includes elevators, oil saver pump, no BJ tongs, currently working.  Price:  $87,500 - Pennsylvania

Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools  Price:  $112,500 - Oklahoma

350 GM deck engine, mounted on 1986 GMCtruck, 454 GM engine, sandline, approx 50" mast, no cathead, can pull single, ready to work  PRICE REDUCED: $29,500

We can offer NON-OEM or OEM replacement spare parts for oilfield drilling rig equipment used on Oil & Gas or Geothermal Energy drilling rigs. This service includes sourcing, purchasing and delivery for the international end user. This service provides a convenient one stop process for many of our international drilling contractor customers that do not have an office in the United States for purchasing from many of the manufacturers here in the USA for drilling equipment parts.

* We currently have procurement contracts and alliances with drilling contractors all over the world with set markups for all drilling equipment parts purchased for long term benefits for both parties. Benefits include record keeping and online documentation/certification services for each rig.

Some of the drilling equipment parts are stock and ready to ship and others can take weeks to deliver. Typical drilling equipment parts and manufacturers that can be offered are:

Swivels – National, Continental Emsco, Ideco, Oilwell (Wash pipes Alternative US Made Aftermarket – Washpipe Assy, National 649355A or 649355-A, Mission 61938641 & Harrisburg 70-106-24)

IADC Daily Drilling Report Forms – DDR-Form-2T6 2-Tour Forms for two 12-hour shifts, month’s supply packaged in each pad (31 sets per pad) (Each carton