workover rig blocks brands

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Manufacturer of standard & mobile rigs & carriers for oilfield applications. Includes well servicing from 14,000 ft. to 22,000 ft., workovers from 10,000 ft. to 16,000 ft. & drilling from 6000 ft. to 10,000 ft. Specifications include brakes range from 28 in. dia. x 8 in. wide to 42 in. dia. x 12 in. wide, barrels from 12 3/4 in. x 38 in. to 18 in. x 43 in., chains from 1 1/4 in. to 1 3/4 in., clutches of 24 in. with single & 2 plate air friction outboards, shafts of 5 in. dia. to 6 1/2 in. dia. & gross weights from 63,200 lbs. to 115,000 lbs. Also includes forged steel, demountable options, mufflers with spark arrestors, dry type air cleaners, transmissions with torque converters, water splash brake cooling & up to 6 axles.

Cameron provides traveling blocks from 275- to 1,250-tonUS. Precise weighting of our traveling blocks ensures fast free-fall, while their streamlined, compact design eliminates interference with mast or derrick components. Their long service life is enhanced through quality fabrication and the advanced metallurgy of sheaves, beckets, and components. Cameron traveling blocks feature low-inertia sheaves for high performance and reliability.

Inserting and pulling up pipe tubing from oil wells is a precise and challenging job that not every rig is up for. That’s why you need a mobile workover rig from Dragon to get it done right every time. Our workover rigs are state-of-the-art and ready to tackle even the harshest conditions. A workover rig is perfect for site preparation while a standard mobile oil rig can handle a variety of piping tasks. Need workover rig parts, or service on another mobile rig? Dragon has that covered with our parts selection, too. View all of our workover rigs and other drilling rigs today.

EVDANCO OGC SRLoffers a wide range of brake blocks such NON ASBESTOS OILFIELD BRAKE BLOCKS especially designed for all known drawworks brands as well as customized models that can be installed on drilling and workover rigs.

The blocks are manufactured with special fabrics of uniform density and friction surfaces that adapt precisely to the shape of brake drums. The blocks are manufactured with fiberglass yarns mixed with synthetic and natural fibers, according to specific technical requirements. The yarns contain copper or brass metallic inserts that ensure efficient dissipation of heat. The woven are impregnated with special resins, and processed appropriately to ensure continuing and stable friction under low and high temperatures. The sets of blocks include non-asbestos wiper blocks, retaining screws and sealing plugs.

Brake blocks are mainly used in oil industry services. They equip the brake bands of the drawworks, air clutches of the different transmissions of the drilling rigs and other wellhead equipment.

Brake blocks are mainly used in oil industry services. They equip the brake bands of the drawworks, air clutches of the different transmissions of the drilling rigs and other wellhead equipment.

Are molded blocks mounted at the dead end of the brake band. Provide a non-abrasive scouring and polishing action on the brake flange. Prevent lodging of metal particles in the other blocks and promote a better wear pattern.

Dragon manufactures a full line of 300 to 1,000 HP Cooper ™ Rigs at our state-of-the-art U.S. facility and our rig team is one of the most seasoned in the industry. Whether you need a used well servicing rig, a workover rig, a drilling rig, mud pumps and systems or parts and service, Dragon has you covered.

Our expansive inventory of parts and accessories includes mud systems, mud hoppers and mud guns, agitators, pipe racks, draw works, API 4F, 4th Edition certified masts, break blocks, McKissick tubing and drilling blocks and refurbished gear boxes for most brands of well servicing units. Our rig masts have a clearance height range of 71-124′ and capacities of 150,000 lbs too 500,000 lbs.

Like all Dragon equipment our used Cooper Workover Rigs are severed duty engineered. We also have hands-on experience building to severe, cold weather specs and in compliance with the state of California’s requirements. When you buy a Cooper™ Rig from Dragon you get a custom, easy to operate, safe rig at a competitive price. Whatever mobile rig solution you need, Dragon will build it, deliver it and back it with the highest level of service and support in the industry.

We are a parts supplier for all major brands of well servicing rigs and equipment. We are an authorized distributor of quality oilfield brands such as Crosby, WPT, Kobelt, Parker and Oil Country, to name a few. With a full machine shop and fabrication capabilities, we can make hard to find parts that keep older equipment in service.

WILSON WELL SERVICE RIG  (Ref#3000Ta)  103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR

Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread  7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch.  Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations.  Price:  $265,000

Manufactured 2014, 72’ x 180,000# derrick on 4-line (250,000# on 6-line), mounted on 5 axle carrier, Detroit Series 60, Allison transmission, all hydraulic, 8000’ of 5/8” sandline, 100 ton McKissick casing blocks, 1” line 42” x 12” casing drum, 42” x 12” sand drum, disc assist on casing drum, 1500 hours, 3000 miles.  Westco power tongs 1-1/2”, 2”, 2-7/8” and 5-1/2”, set of bails/links, tubing elevators 1-1/2” – 2”, rod hook, elevators, wrenches, swab tools, Martin Decker weight indicator, stored inside  Price:  $645,000

Built 1981, mounted on 5 axle carrier, Detroit 60 Series engine, 104’ x 250,000# mast, 5860 Allison 6 speed transmission, 100-ton McKissick spring loaded blocks, 2 winches, blocks, all lines, drill line, approx. 13,000’ of 9/16” sandline, all guy lines, load lines, belly lines, floor lines and 2 winch lines all with current tags, currently working, excellent condition  Price:  $320,000

Derrick fell onto rig when being raised, derrick would need to be replaced or repaired.  Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake.  Extra rebuilt 3408 Cat engine.  Price as is:  $112,500

Built 2010, Detroit 60 Series engine, 5860 Allison transmission, 103’ x 250,000# mast, double triple, 2 winches, McKissick 100-ton spring loaded blocks, all lines, drill line, approx 13,000’ of 9/16” sandline, all guy lines, load lines, belly lines, floor lines and 2 winch lines all current tags.  Excellent condition, currently working.  Price:  $420,000

Manufactured 2008, 72’ x 150,000# derrick, Detroit Series 60 engine, mounted on 4 axle Crane Carrier, tooled out, Guiberson T60 air slips 100 ton casing blocks, Westco power tongs, currently working   Price:  $445,000

Double drum, 15,000’ of new 9/16” line, near new 4-line blocks, mounted on 5 axle Crane Carrier, 104’ x 250,000# mast, 750 Allison transmission, Detroit 60 series, currently operating  Price:  $130,000

Manufactured 1981, mounted on 5 axle carrier, double triple service rig, 96’ x 250,000# derrick, Detroit Series 60 12.7 diesel engine, Allison transmission, 9/16” sandline, 1” drill line,  hydraulic jacks, hydraulic catwalk, travelling block, tubing bard, rod basket and all necessary lines.  Tooling not included.  Price:  $115,000

Manufactured 1983, double drum, 96’ x 180,000# derrick, mounted on 5 axle carrier with 92T engine, Allison transmission  Price rig only:  $300,000  Price with tooling:$340,000

WILSON 42 WELL SERVICE RIG(Ref#7562Ta)  Manufactured 1975, 180,000# Pemco double/triple derrick, mounted on Wilson carrier with Detroit 8V71 engine, 4 hydraulic leveling jacks, ready to work  Price rig only:  $74,500  Price with tooling:  $94,500

Manufactured 1983, 70" x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier.  Rig runs and truck drives, stacked for several years, good condition  Price:  $93,500 USD

Manufactured 2009, Detroit 60 Series engine, 96" x 225,000# mast, mounted on 5 axle carrier, blocks, elevators, air slips, one owner  Price:  $420,000

FRANKS 500 WORKOVER RIG(Ref#7615Tc)  Built 1980, refurbished 2018, 102’ derrick, 150 ton blocks, 15,000’ sandline, new engine and transmission, ready to work  Price:  $430,000

FRANKS 400 WORKOVER RIG(Ref#7615Ta)  Built 1979, refurbished 2017, 102’ x 215,000# derrick, 100 ton blocks, 15,000’ sandline, 4 lines  Price:  $390,000

Built 1981, refurbished in 2018, 102’ derrick, new drilling line, no sand line, 100 ton blocks, 2 winches, has not worked since refurbishment.  Price:  $390,000

FRANKS 300 SERVICE RIG(Ref#1169Ta)  4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition  Price:  $37,500

Manufactured 2004, Cat diesel engine, 96" x 250,000# mast, mounted on 5 axle carrier, blocks, elevators, air slips, needs new air lines  Price:  $170,000

Manufactured 2007, double drum, 104’ x 250,000# mast, Detroit 60 Series engine, mounted on 5 axle Crane Carrier, McKissick 73 150-ton blocks   Price:  $470,000

WILSON MOGUEL 42 WELL SERVICE RIG(Ref#3177Tb)  Two available, 96" x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools  Price:  $315,000

Double/Triple 96" x 225,000# derrick, 60 Series Detroit engine, mounted on 4 axle carrier, 750 Allison transmission, sandline, blocks  Price:  $72,500

Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity.  Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig.  5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks  Price on Request

Refurbished, Double/Triple, 96" x 215,000# derrick, Detroit 60 Series, mounted on 4 axle carrier, 750 Allison transmission, sandline, blocks Price:  $102,500

Manufactured 1982, Tubing drum 42 x 12, sand drum 38 x 8, Detroit Series 60 diesel engine, 96’ x 200,000# derrick with set of tubing blocks, hydraulic and air hoses gone through, installed all new engine harness and electrical wiring to all lights, transmission.   Rebuilt valve bank  Price:  $200,000

Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch.  Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed.  But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run.    Price as is: $19,500

Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline  Price:  $225,000

CARDWELL KB200B SERVICE RIG(Ref#11674Ta)  72’ x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission PRICE:  $127,500

Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years  Price:  $92,500

1980, 475 hp, single drum (new), reworked, 96" x 205,000# hydraulically raised mast, 6 lines,  crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use   PRICE: $115,000

SKYTOP BREWSTER RR400(Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36" base beam for rig, ready to work  Price:  $110,000

Manufactured 1976, 50 Series Detroit engine, 4460 Allison auto transmission, 96" x 180,000# Skytop derrick, 100 ton McKissick blocks, 7000" of 9/16" sandline, BJ tubing tongs, Guiberson air slips, 2-3/8 and 2-7/8 elevators, rod wrench, rod elevators, weight indicator, lubricator pump, misc tools  Price:  $320,000

500 hp, manufactured 2007, Pemco 104" x 225,000# derrick, double triple, 100 ton McKissick blocks, BJ style tubing tongs, rod tongs, rod basket, 8"3" bales, 16,993 miles on truck, 4016 hours, all handling tools

Built 1966, Double drum 1058 drawworks, 8500’ sandline, blocks, 96’ x 150,000# derrick, mounted on 4 axle carrier, Detroit 6V92T replaced August 2019, PTO, power steering and alternator/generator needs modifications to work with new Turbo diesel engine

Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field  Price:  $295,000

Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily  Price rig only:  $157,500

Double drum drawworks with hydromatic brake, 10" brakes, 96" x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650" of 7/8" tubing line, 8000" of 9/16" swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84" links, 2-3/8" and 2-7/8" tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections  Price:  $140,000

Manufactured 1974, double drum drawworks,  double triple 96" x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000" 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000"s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED:  $115,000

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head  Price:  $242,500

Built 1966, Double drum 1058 drawworks, sandline has 5/8” line, 75 ton blocks on tubing drum, 10 x 13 single pole, 6V471 Detroit engine, standard transmission, 3 axle carrier, good tires, misc parts and accessories including chains, seals, old style oiler, sitting since 2016, running when parked, includes spare parts.   Price:  $47,500

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling  Price:  $52,500

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

Cable Tool Drilling and Completion Rig, 60" double poles rated to 150,000#, 5000" drill capacity, 10,000" pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300" drill line on drum, 3500" on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine  Price:  $72,500

400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good.  Includes elevators, oil saver pump, no BJ tongs, currently working.  Price:  $87,500 - Pennsylvania

Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools  Price:  $112,500 - Oklahoma

The 844 TD-HD Workover Rig by Franks has a 3/4″ Tubing Line, Air Clutches and is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.  The 844 TD-HD Workover Rig is in excellent working condition, has a current OK Tag and clean Title.

Performance proven main drum draw works assemblies are modular construction for versatile rig assembly. Designed to allow maximum parts interchangeability and easy add-on features to customize this for your specific operation.

Sovonex™ crown blocks are strictly manufactured to the latest edition of API 4F and API 8C and authorized to carry the API monogram. We use them on all of our land drilling rigs, mobile rigs, and self-propelled workover rigs due to their reliability.

Kor-Pak has broad experience in the Oil/Petroleum industry. Our specific field of expertise lies on our ability to furnish our clients with innovative and robust braking systems for drawworks and service rigs, friction materials for drilling applications, power units, controls, hydraulics, seals, gears, drums, custom machined/fabricated parts, and custom engineered parts.  Kor-Pak possesses a thriving OEM and aftermarket segment and can design custom products, as well as recondition/retrofit your existing equipment.  Click HERE for the Kor-Pak Oil/Gas Brochure.

Our sophisticated line of  braking systems have been used successfully in offshore and on-shore applications, including cranes, vessels, and mobile draw works/service rig applications. Our heavy-duty oil rig caliper disc brakes are ideal for these demanding applications. For drilling and service rig applications, our disc brakes can come spring set and hydraulic or air released. Hydraulic or air applied brakes are also available.   For more information please contact a Kor-Pak representative.  Our

The new “A-Block” by Scan-Pac is the only premium non-asbestos woven material that reduces downtime and repair costs. It has been developed specifically for the oil field for use on draw-works and well servicing rigs. Extensive field evaluations confirm that this product provides outstanding performance in this demanding application area. The “A-Block” exhibits smooth, long-lasting trouble-free service with excellent seat-in. Further enhancements have been introduced which significantly reduce abrasion on rims and flanges. The resulting “A-Block” provides the oil field with an upgrade product with premium performance.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Since 1999, Rig Tool Products has been serving the Drilling and Well Servicing community to meet the demand for products that exceed industry standards. Our many years of experience in manufacturing have given us the knowledge to meet these demands, allowing us to produce quality parts at affordable prices.

Rig Tool Products offers many consumable parts for name brand handling tools in today’s marketplace. Our specializations include tong dies, slip inserts, tubing spiders, manual slips, power tong parts, elevators, manual tong parts, rubber products, brake blocks, brake rims and brake bands. Through precise engineering, our goods have the ability to interchange with OEM tools such as Varco, Baash Ross, Woolley, Guiberson, Cavins, Foster, BJ, Oil Country and many more.

With multiple manufacturing facilities, we have allowed ourselves the opportunity to expand our product lines as well as increase our inventory, giving us the ability to meet your needs when you need it most. As Rig Tool Products continues to expand our global presence, our company and employees remain dedicated to the standard of service and parts we’ve come to be known for!

Watson/Hopper, Inc. was incorporated in the State of New Mexico in May 1993. Watson Hopper is 100% owned by Watson Truck & Supply, Inc. which has been in business since 1943. Watson Hopper is engaged in the manufacturing and sale of replacement parts for Hopper rigs, as well as the manufacturing of new well service units, which are called Watson/Hoppers. In November 2003, Watson/Hopper also acquired the blueprints, drawings and trade name “Corsair” from the Crane Carrier Company of Tulsa, Oklahoma. Watson/Hopper markets and manufactures replacement parts and new equipment for the Corsair line of rigs. The company has been in the same family since 1943.

Oilfield Supply, LLC provides all the parts and handling tools needed on well service rigs. This includes blocks, tongs, slips, elevators, weight indicators and anything else you can imagine. We strive to be able to provide a one stop shop for all your needs.

Our continuing operations include: Full Service, Franchised International Truck Dealer, Authorized Dealer for Allison and Cummins, Oilfield Supply Store with nationally recognized brands represented for blocks, tubing tongs, rod tongs, slips, elevators and just about anything else you need in the oilfield. We have a fantastic facility for refurbishment, repair and fabrication of virtually any type of heavy equipment which we call our Unit Shop.

Watson Hopper which is a wholly owned subsidiary of Watson Truck & Supply offers the Watson Hopper, Watson Corsair product line of workover rigs as well as the Raven pump. Our facility in Hobbs is API 4(f) certified. Our welding programs are overseen by two certified weld inspectors (CWI) and our engineering department is headed by a Professional Engineer (PE).