workover rig companies in oklahoma free sample

You will perform advanced hydraulic fracturing operations and assist in various aspects of the job including pre-job preparation, mobilization, rig up, on site…

Assists in various aspects of Acidizing and Cementing operations, including pre‐job preparation, mobilization, rig up, on site operations, rig down, on‐site…

Develops an understanding of all major rig components and the necessary servicing. Prior experience in oil field, heavy industry or construction is beneficial.

Previous experience as an Frac operator, coiled tubing, rig, oilfield, oil & gas, Oil and gas, energy, energy services, driving tractor trailers, well services,…

Previous experience as an Frac Equipment operator coiled tubing, rig, oilfield, oil & gas, Oil and gas, energy, energy services, driving tractor trailers, well…

Flowback Operator will rig up for Drill out operations. SR/ Lead operators will be evaluated, and rates will be determined based on flowback experience.

Previous experience as an Frac operator, coiled tubing, rig, oilfield, oil & gas, Oil and gas, energy, energy services, driving tractor trailers, well services,…

Develops an understanding of all major rig components and the necessary servicing. Prior experience in oil field, heavy industry or construction is beneficial.

Previous experience as an Frac operator, coiled tubing, rig, oilfield, oil & gas, Oil and gas, energy, energy services, driving tractor trailers, well services,…

Previous experience as an Frac Equipment operator coiled tubing, rig, oilfield, oil & gas, Oil and gas, energy, energy services, driving tractor trailers, well…

Previous experience as an Frac operator, coiled tubing, rig, oilfield, oil & gas, Oil and gas, energy, energy services, driving tractor trailers, well services,…

The Crew Worker, under the direction of the Rig Operator, performs activities and operates hand and power tools to perform maintenance and repairs to oil or gas…

Housing provided on rig or short distance from the rig, 12 hr shifts. Will be housed on drilling rig, or within a short distance to the rig, traveling.

Previous experience as a carpenter, general laborer, roofer, landscaper, heavy equipment operator, construction, pipefitting, oil and gas, energy services,…

You will perform advanced hydraulic fracturing operations and assist in various aspects of the job including pre-job preparation, mobilization, rig up, on site…

0-6+ months experience on a large oil and gas drilling rig. Bringing tools and equipment to rig floor. Observing equipment operations and events to recognize…

You will perform advanced hydraulic fracturing operations and assist in various aspects of the job including pre-job preparation, mobilization, rig up, on site…

Manages tools on the workover rig floor and assists in daily maintenance. May be responsible for working the floor or operating the rig when necessary.

Must have years of experience working multiple positions on an oil and gas drilling rig. General maintenance of drilling rig. Must be at least 18 years of age.

PREFERRED skill sets include: Torque Turn (CAM), CRT, Tong Operator, Crew Pusher, or previous oil & gas rig experience. High school diploma or GED preferred.

Maintains a safe working environment and reasonably clean and tidy rig floor area by picking up and storing all tools in their respective storage areas after…

You will be responsible for supporting field service operations for our MPD equipment and providing technical support to our clients on field locations across…

You will perform advanced hydraulic fracturing operations and assist in various aspects of the job including pre-job preparation, mobilization, rig up, on site…

Daily communication with the rig crew and supervising geologist from the oil company is expected. Field work allows you to learn the processes involved in…

Inspect main engines every tour for proper working order by checking the following: oil level, coolant, gauges, possible oil leaks, noise and vibrations and…

Coordinate all equipment and crew during rig-up/rig-down of each well. Must be able to rig-up, operate, and troubleshoot multi-well ESD systems, and assist with…

National Oilwell Varco (NOV) is a leading provider of technology, equipment, and services to the global oil and gas industry that supports customers’ full-field…

Must possess the ability to rig up, run, and rig down various components on a drilling rig. Rig up, run, and rig down various components on a drilling rig.

6 months of experience working on a well servicing rig preferred. Basic understanding and ability to operate rig equipment – slips, tongs and elevators.

Top Drilling Company is a free list download the contains the drilling operators that have drilling rigs located in the US. Included in the list are company names, telephone, Linkedin URL and websites. The top drilling company list includes drilling companies that operate in Texas, Oklahoma, New Mexico, Louisiana and Western Canada. Check out our rig locator page.

Helmerich & Payne, Inc. (H&P) is a top drilling company in US that began in 1920, when Walter “Walt” Helmerich II—a thrill-seeking aviator from Chicago, and William “Bill” Payne—a hard-working microbiologist from Shawnee, Oklahoma, met on a Star 29 cable rig in South Bend, Texas. From this unlikely pairing was born a partnership, a deep friendship and the oil and gas drilling company that still bears their names.

Fast forward 100 years, Helmerich & Payne continues to lead the drilling industry through a commitment to innovation and unmatched reliability. And by expanding our drilling operations to meet the increasing demands of a complex and globalized industry, we’ve established ourselves as an industry trailblazer and trusted partner.

Patterson-UTI (NASDAQ: PTEN) is a top drilling company in US that pushes the boundaries of innovation so you can embrace new possibilities. With expertise and scale in major operational areas, we provide a diverse network of drilling and pressure pumping services, directional drilling, rental equipment and technology to forge your path to success. Our oilfield solutions deliver results that lead your business into the next generation of oil and gas.

We have a fleet of fit for purpose land-based drilling rigs and significant pressure pumping horsepower, as well as a leading position in directional drilling and wellbore placement services that are positioned in the most active plays throughout the U.S. With headquarters in Houston, Texas and regional offices throughout our operating areas, let’s team up to advance your business.

Nabors is a top drilling company in US and Canada that owns and operates one of the world’s largest land-based drilling rig fleets and is a provider of offshore platform rigs in the United States and numerous international markets. Nabors also provides directional drilling services, performance tools, and innovative technologies for its own rig fleet and those of third parties. Leveraging our advanced drilling automation capabilities, Nabors’ highly skilled workforce continues to set new standards for operational excellence and transform our industry.

Precision is a top drilling company in US has a reputation for operating safely, lowering customer risks and costs, developing people, generating financial growth and attracting investment. Precision Drilling Corporation is an integrated oilfield drilling and energy service company providing services to the oil and gas industry. The Company provides oilfield rentals, well services, catering services, and drilling services through its several business units.

ENSIGN IS A GLOBAL ENTERPRISE, PROVIDING A UNIQUE EDGE IN OILFIELD SERVICES. We’ve grown to be one of the world’s largest and technologically advanced oilfield service providers. Premium services include contract drilling, directional drilling, underbalanced and managed pressure drilling, rental equipment, well servicing and production services. Established in 1987, our operations now extend from Canada and the United States to Latin America, the Middle East and Australia.

As the largest privately-held domestic land drilling contractor in the United States, Cactus provides competent, motivated personnel utilizing premium equipment to meet and exceed the drilling requirements of our customers. We are committed to delivering consistent and dependable results for each of our clients, while protecting the environment and ensuring the safety of everyone affected by our operations. It is the vision and objective of our employees to provide maximum value for our customers… and to be the “Contractor of Choice”.

Since 1977 SCANDRILL, INC. has provided land contract drilling services to independent and major oil and gas exploration companies. Headquartered in Houston with Operations offices in Tyler, Odessa and Yukon, the company’s 30 NORSEMAN Series™ rigs are drilling in the ARK-LA-TEX, Oklahoma and Permian Basin, which includes the Midland and Delaware Basins of West Texas and New Mexico.

Savanna Group of Companies is a top drilling company in US & Canada is a wholly owned subsidiary of Total Energy Services Inc. Savanna offers a complimentary suite of oilfield services. Savanna Drilling, Savanna Well Servicing and our rentals divisions work in unison to provide well-balanced, well-centred programs. From spud to release and beyond, Savanna’s group of divisions work together to ensure customers receive the best possible equipment, people, and value to deliver results and maximize value.

Independence Contract Drilling is a premium land drilling services provider. From our corporate headquarters in Houston, Texas, we develop and assemble our ShaleDriller® series rig design based on E&P operator feedback and field requirements. ShaleDrillers are designed for safe and efficient drilling operations on large, multi-well drilling locations. They are designed to move fast and are capable of walking in multiple directions. The ShaleDriller series rigs are AC programmable, energy efficient BiFuel, and custom designed to be best in class for the development of our clients’ most demanding and financially impactful exploration and development programs. We excel in shale plays and other areas where completions require long horizontal sections, drilling quickly and accurately to minimize nonproductive time for our clients. We also excel where multi-well pads offer the option to walk between well bores and provide the opportunity to plan 3-hour release-to-spud times.

AKITA Drilling Ltd. is a top drilling company in US & Canada was formed in January of 1993 through a Plan of Arrangement with our predecessor, ATCO Drilling Ltd. At its inception, AKITA operated 26 drilling rigs in Canada. In addition to Canadian operations, AKITA also conducted drilling operations in the United States.

In 2000, AKITA re-established significant operations in Canada’s northern territories. As technology evolved, we were among the earliest adopters of pad rigs, including their use in the development of heavy oil and shale gas resources. This quickly became a market strength for AKITA, and today pad rigs make up approximately half of our deep capacity fleet. In 2018, AKITA Drilling Ltd. and Xtreme Drilling Corp. combined the two companies through a Plan of Arrangement to create a leading intermediate North American land drilling contractor. The combined company, operating under the AKITA Drilling name, has a fleet of 40 high-spec drilling rigs with operations in major resource basins in the US and Canada.

The land drilling market worldwide is structured primarily as a rental market, not a sales market, where land drilling companies lease their rigs to E&P companies for an agreed period of time – weeks, months, or years – at a day-rate. The rigs are then used to drill wells and execute the E&P’s drilling programs.

Drilling opportunities are analysed and explored in order, leaving a series of dry holes, until a discovery is made. It is rare for an E&P company to actually own the rigs which they operate, but there are some exceptions such as Chesapeake, who will purchase their own fleet of rigs.

Under these rental contracts, a turnkey cost is paid by an E&P business to a middleman. This includes an insurance premium, which is returned if nothing goes wrong, but may be lost if there are difficulties. Higher specification equipment commands a larger premium.

Investors require a minimum level of return for their investment dollars in drilling operations, and typically equate cost with risk. These turnkey drilling contracts may limit risk by guaranteeing a minimum number of wells that can be drilled with the rig. The contract will also outline how the rig can be used – including the pieces of equipment, when to change pieces, temperature and pressure tolerances and the weight of mud.

The International Association of Drilling Contractors (IADC) lists 547 members in the category of Land Drilling Contractors. According to Statista, the key US land drilling contractors are: Nabors Industries Ltd, Helmerich & Payne Inc, Patterson-UTI Energy Inc, Precision Drilling Corporation and Pioneer Energy Services Corp.

Nabors operates the world’s largest land drilling rig fleet, with around 500 rigs operating in over 25 countries – in almost every significant O&G basin on the planet. It also has the largest number of high-specification rigs (including new AC rigs and refurbished SCR rigs) and custom rigs, built to withstand challenging conditions such as extreme cold, desert and many complex shale plays.

Headquartered in Tulsa, Oklahoma, H&P is a global business with land operations across the US, as well as offshore operations in the Gulf of Mexico. It is engaged primarily in the drilling of O&G wells for E&P companies, and recognised for its innovative FlexRig technology.

Patterson-UTI operates land based drilling rigs, primarily in O&G producing regions of the continental US, and western Canada. The company also provides pressure pumping services to US E&P companies and specialist technology, notably pipe handling components, to drilling contractors globally.

Precision is an oilfield services company and Canada’s largest drilling rig contractor, with over 240 rigs in operation worldwide. The Company has two segments. The Contract Drilling Services segment operates its rigs in Canada, the United States and internationally. The Completion and Production Services segment provides completion and workover services and ancillary services to O&G E&P companies in Canada and the US.

Pioneer operates a modern fleet of more than 24 top performing drilling rigs throughout onshore O&G producing regions of the US and Colombia. The company also offers production services include well servicing, wireline, and coiled tubing services – supported by 100 well-servicing rigs, and more than 100 cased-hole, open-hole and offshore wireline units.

Together these five companies dominate the US rental market. Other smaller but prominent contractors include: Parker Drilling, Unit Corp, Independence Contract Drilling, Seventy Seven Energy, Schramm and Ensign Drilling. Beyond these players, the market is highly fractured, with many “mom & pop” style drillers.

In Texas, generally considered to be the centre of US land drilling, RigData reports that there are currently 678 active rigs – split between Helmerich & Payne (160), Patterson-UTI (85), Nabors (64), Precision Drilling (39) and 77 other drillers (330).

Most new onshore rigs, both drilling and work over rigs, are built by OEMs in China. In the US, the larger vertically integrated land drillers have in-house manufacturing operations, so they will outsource some equipment construction, but assemble the new rigs at their own facilities. The leading provider of US newbuild rigs is National Oilwell Varco.

The secondary market, where existing rigs are sold, is largely auction dominated with mostly older rigs changing hands. As a rule, the big land drillers do not sell their newbuild rigs, as each has their own flagship designs.

Schlumberger"s emissions digital manager talks about integrating emissions with operations data to reduce emissions, stay in compliance and improve performance.

Here"s how cdl is used on rig hand resumes:Learned more of forklift operation as well as extensive CDL Driving experience.Skills UsedOperation of various equipment and tools.

Here"s how h2s is used on rig hand resumes:Worked & certified around H2S Accomplishments I was acknowledged multiple times in big safety meetings for showing my awareness of safety.

Heavy equipment, also known as heavy machinery, refers to heavy-duty trucks that are specifically built to complete building works, most often earthwork activities or other major construction projects. Heavy machinery works by multiplying the amount of input force added to force exerted, allowing jobs that would otherwise take hundreds of workers and weeks of labor to be completed in a fraction of the time.

Here"s how heavy equipment is used on rig hand resumes:Remove and replace well heads, able to work safely around heavy equipment and flammables, operate machine shop tools safely.

Job safety analysis is the process of analysing the occupational safety at a workplace. It measures factors like safety wellbeing and health of employees. It also aims to solve conflicts that may further lead to the assault of an individual either by a colleague or the employer.

Here"s how job safety analysis is used on rig hand resumes:Experience with safety meetings and Job Safety Analysis as per company standard and policies.

Weather conditions refer to atmospheric conditions in terms of temperature, wind, precipitation, clouds, and humidity. It describes the degree to which the atmosphere is hot or cold, wet or dry, calm or stormy, clear or cloudy.

Meetings that are held among the officials of a company or an organization to discuss ways to provide a safer and risk-free environment for the staff and customers of the company are called safety meetings. These meetings are commonly conducted in companies that deal in risky business involving the use of dangerous machinery and harmful chemicals.

Here"s how safety meetings is used on rig hand resumes:Help co-workers repair rig, Participate in daily safety meetings to help avoid incidents, Help rig stay clean and keep drilling

Zippia allows you to choose from different easy-to-use Rig Hand templates, and provides you with expert advice. Using the templates, you can rest assured that the structure and format of your Rig Hand resume is top notch. Choose a template with the colors, fonts & text sizes that are appropriate for your industry.

Cardiopulmonary resuscitation or CPR is a medical procedure that involves chest compression to help a patient breathe. This artificial ventilation helps in keeping the brain function in place and regulates blood throughout the body. CPR is a lifesaving procedure that is used in emergencies.

Here"s how flow lines is used on rig hand resumes:Monitored issues with the well such as closed valves along the flow lines in order to prevent pressure buildup.

General maintenance is the regular check-up and repairs of machinery, buildings, and other mechanical equipment. General maintenance is performed by repair workers who are skilled to handle the day-to-day defects produced in the machinery. General maintenance aims to make sure the items remain in the best operational conditions. Usually, a set of planned activities are performed regularly by an expert to monitor the maintenance.

Here"s how general maintenance is used on rig hand resumes:Perform general maintenance of draw works, load and off-load pipe and assists in rig movement.

Here"s how swab is used on rig hand resumes:Help on Swab Rig/Fix Leaks/Hook up Wells/Roustabout/Read Meters/Keep Records of Wells/Walk Pipelines/Soap & Flow Wells/Maintain the Running of Four Compressors

At Cactus, we believe the recruitment and development of good people is vital to the success of our company. With employment opportunities in Oklahoma, Texas, Louisiana and New Mexico, we"re continuously seeking top-quality individuals to join our team. We offer competitive compensation, quality benefits, a commitment to providing a safe and desirable workplace, and a culture devoted to developing talent and cultivating the leaders that will sustain our company"s future.

The Yard Hand is responsible for keeping the yard location and shop clean, picked up and clear of safety hazards. It is necessary that every hand be mentally alert and physically fit during the workday. The Yard Hand will assist in sorting and staking incoming and outgoing materials and inventory. Responsibilities include assisting welders, mechanics, and/or electricians. General assembly of drilling equipment is required along with minor sandblasting and painting. Driving a Fork Lift (after receiving Fork Lift Training Classes) will be included in the general duties. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 50 times in a 12 hour period. The ability to lift items weighing 50lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 25lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 50 lbs. The work performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

There are two floor hand positions: Floor Hand and Lead Tong Hand. Each must daily inspect the tongs, breakout line, snub lines, and tong dies for damage, excessive wear, fraying oil soaks, etc. and keep them safe and in good repair. During normal drilling operations duties include washing, cleaning, mechanical repairs, digging ditches, drill pipe connections, drill pipe trips and other manual handling and/or maintenance activities as required by operational needs. While tripping (adding additional pipe to the stand), the Lead Tong Hand must pull and install the busing assembly. This activity will include lifting the tongs and lateral movement of the tongs to attach them to the drill pipe. The tongs are on counterweights and the exertion required to lift them would vary, but is estimated to be similar to lifting weights between 10-30 pounds. The lifting range up or down is 1-2 feet, in the area of the waist. This activity is repeated and could be performed as many as 175 times in a 12-hour Shift. Another activity conducted between tong usages is “pulling the slips.” This activity is performed by 2 or 3 men (depending on crew size) and could be conducted as many as 175 times per a 12-hour shift. The slips weigh between 100 and 175 pounds and the weight would be distributed between the 2 or 3 employees. The slips are located at floor level and would be lifted a distance of 18-24 inches. Racking pipe is another function performed by one of the Floor Hands during a drill pipe trip and involves manually pushing a suspended length of pipe to the area where it is racked. The reverse activity involves restraining the suspended pipe and guiding it across the rig floor. This activity is performed in the standing position and could be performed as many as 100 times per a 12-hour shift. Tripping the pipe string is an operation which involves removing all of the pipe from the well bore and racking it in the derrick. The pipe may be removed for various reasons, but usually is done to replace a drill bit on the end of the drill string. After the operation is complete, the pipe is “tripped” back into the well bore. The tripping operations vary depending on the depth of the well and other factors. Employees may be involved in the tripping operation for the full 12 hours of their work shift. The Floor Hand is responsible for catching and cleaning samples of formation cuttings while drilling. If drilling in gas, he must keep the flare bucket burning. At times it is necessary for the Floor Hand to climb up in the derrick and assist the derrick hand such as bridling up or bridling down. He must also be able to go up and grease the traveling blocks and bridle line sheaves. All hands working together must keep the rig clean, picked up and free of safety hazards. It is necessary that every hand be mentally alert and physically fit during his tour. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 175 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectoralis, and Hand Grip.

The motorman’s primary responsibility is to take care of all the motors on the rig. He must have a mechanical mind and the ability to trouble shoot and identify and repair minor problems that arise. He is responsible for checking the oil, oil pressure, temperature, fuel pressure and radiator water level and to record his findings in the daily engine report during his tour. He must be mentally alert and physically fit during his tour. Other responsibilities include racking pipe on the racking board when coming out of the hole and fill pipe when going in the hole. He is responsible for operation of the closing unit when shutting the well. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 150 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 80% of the time. The ability to kneel up to 15% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

The Derrick Hand is the crew member whose work station is in the derrick while drill pipe is being hoisted or lowered in the hole. He attaches the elevators to the stands of drill pipe while the pipe is being lowered into the hole and detaches the elevators and racks the pipe while the pipe is being hoisted out of the hole. Both operations involve the use of the arms and upper body to hold or pull the pipe. This operation could be repeated as many as 80 to 100 times during a 12-hour shift. He is responsible for greasing and inspecting the crown and all sheaves in the derrick. He must be mentally alert and physically fit while on duty. Other responsibilities of the Derrick Hand include mixing chemicals. The chemicals are packaged in paper bags and plastic buckets. The packages vary in weight from 20 to 80 pounds. Lifting and carrying is required to get the materials from the storage area to mixing areas. Manual handling of the packages or bags could require lifting from floor level to levels between 36 and 42 inches high. Unusual circumstances might require the lifting of numerous bags during a 12-hour shift. He is also responsible for watching the mud pits for an increase or decrease of mud volume, mud weight, and changes in funnel viscosity and gas cut mud. He must also watch and listen to the mud pumps to know when there is a problem. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 175 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to 42" 10 to 20 times a day for a 12 hour period. The ability to carry items weighing 100lbs 10 to 20 times a day for a 12 hour period. The ability to stand up to 99% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

The Driller (crew foreman) is directly responsible for the rig crew during normal operations. He must be able to perform any job on the rig required of his hands, in order to instruct his crew on the “how to” procedure or to fill in as a Floor Hand as necessary. Refer to Job & Task Descriptions forms on Floor Hand, Motor Hand, and Derrick Hand for position requirements. He must know the safe operating limits of the rig and keep within those bounds. He is responsible for the operation of drilling and hoisting equipment. Actual rig operations involve the use of both hands and feet to operate controls. The Driller must be able to see gauges and dials at distances between 1 to 10 feet. He must be able to see the Derrick Hand at a distance of 60 to 90 feet away. He must be physically fit and mentally alert at all times to the operations taking place and crew participation. Activities will be as follows: The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

Mechanics and Techs are responsible for repairing and rebuilding equipment used on conventional and advanced drilling rigs. Employees will be trained on the job to service TOP DRIVES, MUD PUMPS, DRAWWORKS, IRON ROUGHNECKS, HYDRAULIC UNITS along with CONTROLS and INSTRUMENTATION for electronic drilling rigs. Mechanics and Techs must be mechanically inclined, work safely, able to work long hours, self-motivated, and proficient with various tools. It is necessary that every hand be mentally alert and physically fit during the workday. Also, employees must have a clean driving record and available to be “on-call”. Activities include: The ability to work and communicate with a team of people, the ability to push/pull/lift items weighing 80lbs repeatedly; the ability to climb up 20 to 50 steps, and the ability to exert a maximum level of physical activity. The majority of work will be performed outside with prolonged exposure to the environment, both hot and cold. Service calls could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet.

For the latest global offshore drilling market report, oil drilling market forecast, and top offshore drilling companies profiles, please see Global Offshore Drilling Market Report 2018-2022, or request your

Schlumberger is currently topping the list of the world’s top offshore drilling companies. It is the biggest offshore drilling contractor (in terms of revenue) not just in the US but across the world has a history of science and technology innovation, backed by strategic mergers and acquisitions. From conventional to application-specific systems for geothermal wells, rigs, jack-ups, unconventional plays and more, Schlumberger’s drilling services are designed to trim down the installation time and enhance safety.

Schlumberger supplies the industry’s most comprehensive range of products and services, from exploration through production and integrated pore-to-pipeline solutions for hydrocarbon recovery that optimize reservoir performance.

As part of Newsweek’s ‘Green Rankings’, Schlumberger was ranked 118th out of 500 large eco-conscious companies. In its own speciality, the company is the 3rd ranked offshore driller out of 31 entries.

Halliburton serves the upstream oil and gas sector throughout the lifecycle of the reservoir, from locating reserves and managing geological data, to drilling evaluation, well construction, completion and production optimization through the life of the field. Offshore drilling services offered by Halliburton include horizontal and directional drilling, measurement-while-drilling, logging-while-drilling, multilateral systems, underbalanced applications and rig site information systems.

Fluor Corporation is a MNC engineering and construction firm, the largest such entity in the ‘Fortune 500’ rankings, with a listing of 149. The company specializes in engineering, procurement, and construction management services for drilling and production resources at offshore fields and other energy assets. Fluor was involved in the development of some major offshore areas such as the Enfield oil field in Australia, Nasr/Al-Nasr field development in Abu Dhabi, UAE, the Ku-Maloob-Zaap field in Mexico, and the Bohai Bay field in China.

Baker Hughes specializes in drilling, production, and completion services for oil, gas and other energy industries. Offshore drilling systems offered by Baker Hughes include directional drilling services, measurement-while-drilling, coiled tubing and re-entry, logging-while-drilling, casing/liner drilling systems, drilling optimization, and remote drilling. Who Dat field in the Gulf of Mexico and the Skuld offshore field in the Norwegian Sea are some of the major offshore oil fields wherein the company offers its deep-water drilling services.

Transocean Ltd. is the world’s largest provider of offshore contract drilling services across the globe. With 140 mobile offshore drilling units, four ultra-deepwater new build units, and five high-specification jack-ups, the company’s fleet is considered one of the most versatile and modern in the world owing to its significant emphasis on technically demanding sections of the offshore drilling business.

The company’s operations are geographically dispersed in terms of oil and gas exploration. As its drilling rigs are mobile assets that can be moved according to prevailing market conditions, the company operates comfortably in a single market scenario as well as internationally. More recently, Transocean has shown great resolve in dealing with the oil crash and the industry’s general lethargy and is poised to have a dominant 2018.

For more than 25 years, UK-based Ensco Plc has been bringing energy to the world as an international provider of offshore drilling services in the oil and petroleum industry. Ensco has a significant presence in the most strategic offshore basins across six continents. On Oct 6, 2017, Ensco acquired the Houston-based offshore driller Atwood Oceanics in an all-stock deal. The company has made timely acquisitions to grow into a dominating offshore drilling company, and the acquisition of Atwood has incremented the organization’s brand value.

In 2017, things were a bit uncertain for the Bermuda-based offshore drilling company Seadrill. The company used a Chapter 11 bankruptcy filing to get its balance sheet in order. Bankruptcy risk for Seadrill grew considering a crushing industry downturn and billions of dollars in debt that had to be serviced. However, the company has the most capable, newest fleets of drilling vessels in operation and a strong track record of efficient and safe procedures that make it an ideal partner for several oil producers.

Post declaration of bankruptcy, Seadrill sports a strong balance sheet. The investors are thinking smartly and keeping Seadrill on their radar, to engage once again after the company emerges from bankruptcy completely sometime in 2018.  If things go right for Seadrill, 2018 is poised to be an excellent year.

Noble Corporation, one of the leading offshore drilling companies for the oil and gas sector, has had an incredibly difficult time along with its competitors since the start of the oil crash, but has made many noticeable improvements in recent times. The company owns and operates one of the most versatile, modern, and technically advanced fleets in the offshore drilling industry.

Noble’s offshore fleet spells versatility. This affords the company the best vantage point, of all the other big drillers, to fight for and win contracts. This is strategy one for Noble in 2018.

The US based public limited company operates a fleet of 28 offshore drilling units, comprising of 14 drillships and six semisubmersibles along with 14 jack-ups. These machinery are focused squarely on ultra-deepwater and high-specification jack-up drilling jobs, applicable across both emerging and established regions worldwide.

Diamond Offshore Drilling incorporated on April 12, 1989 and traces its foundation to the earliest days of the offshore drilling sector. Today, the company operates in the waters of six continents, supplying comprehensive drilling services to the global energy industry. Configured to attain the optimum balance of performance and flexibility, Diamond Offshore’s fleet has amassed its reputation on more than four decades of real-world drilling experience. The company’s diverse fleet includes 14 jack-ups, 30 semisubmersibles, and one dynamically positioned drillship.

Rowan is one of the best-positioned companies in the offshore drilling industry in terms of both tackling weather weaknesses and taking advantage of the improved industry conditions. The company has the only UDW fleet in the industry composed of all seventh-generation rigs, which delivers extra performance and safety features as requested by customers. The company is financially powerful and has adequate cash to handle its commitments until 2023.

Rowan’s fleet comprises of 23 offshore drilling jackup rigs and 4 UDW drillships. An additional 5 jackup rigs are also listed as part of its JV with Saudi Aramco.

The majority of the company’s 2017 revenue was generated from the following partnerships: 29% : Saudi Aramco, 17% : Anadarko Petroleum, 14% : Cobalt International Energy, 7% : Repsol and ConocoPhillips.

For detailed information about the global offshore drilling market size, offshore oil and gas industry statistics, and top offshore drilling companies, take a look at Technavio’s FREE!

The company operates both in deep waters and shallow, using hi-tech drilling fleet including the ultra-deepwater DP drillships Saipem 12000 and Saipem 10000 and the fifth-generation semi-submersible drilling units Scarabeo 7 and Scarabeo 5.

Weatherford International, domiciled in Switzerland and operationally based in Houston is one of the leading offshore drilling companies and suppliers of a wide range of equipment and services for the oil and gas drilling industry, operating in nearly 100 countries. Their drilling business is on its way to becoming a standalone independent drilling contractor. Today, the company operates with a fleet of 115 rigs and 6000+ people. By and large, it is a new breed service company that provides the industry more efficient operations, extended products and services and greater geographic diversity.

Weatherford is listed in the ‘Euronext Vigeo World 120 index’, an exclusive categorization comprising of 120 of the most advanced companies in the European, North American and APAC regions.

Weatherford was pursuing a groundbreaking OneStim JV with Schlumberger that would have elevated the company’s game considerably. However, as of Jan-2018, this JV has been scrapped.

Currently, Weatherford’s shares are trading at an eight year low. However, these shares have massive gain potential, thus, the company is a favorite at the stock markets.

With many successful refurbishments and new building projects, the Aberdeen, Scotland-based Stena Drilling has been a pioneer in many areas of technological innovation and developments in the offshore drilling companies list.  The company operates globally with three midwater drilling rigs and four ultra deepwater drillships. Stena Drilling has been successful in obtaining commercial contracts for a majority of its fleet at attractive rates, thereby securing a prime source of cash flow.

In 2018, Stena Drilling secured a highly lucrative contract to work the giant Samo prospect, located off the coast of Gambia, Africa. This offshore project is expected to churn out 825 million barrels of oil annually.

With nearly five decades of experience in offshore drilling operations, China Oilfield Services Limited (COSL),one of the largest offshore drilling companies in China, is a versatile offshore oilfield service solution provider with sought-after integrated functions and bundled service chain in China and other countries worldwide. The company works in the four major business segments including drilling services, marine, transportation services, geophysical services and well services, covering the exploration, production and development phase of the oil and gas industry.

Nabors Industries, is the largest land drilling company in the US and one of the top international land drilling contractors, with a fleet of more than 200 land drilling rigs operating in significant oil, gas, and geothermal drilling markets worldwide. The company is also grabbing substantial market share in offshore drilling services through dozens of its offshore, barge and jack-up rigs as well as a wide range of complementary oilfield engineering, management, and logistics services, making it one of the leading offshore drilling companies in the world.

As a supplier of offshore platform workover and drilling rigs, Nabors is highly commended for its jack-up and platform rigs, both of which are nestled on the bleeding edge of innovation.

The offshore fleet of the Norwegian company Fred. Olsen Energy with subsidiaries consists of five mid-water semi-submersible drilling rigs and two ultra-deepwater units. Three of its semi-submersible drilling rigs are operating on the Norwegian Continental Shelf. The company’s shipyard, Harland & Wolff, in Northern Ireland, focuses on steel fabrication, ship repair, and engineering services, alongside services for activities associated with offshore wind farms.

KCA Deutagis among the largest offshore drilling companies in the UK. It is a world’s leading provider of drilling and engineering expertise and operates both onshore and offshore. A reliable brand name, KCA Deutag has won several new contracts in recent times. With 125 years of experience, the company is well poised to dominate the global offshore drilling industry. The group consists of four business segments: design and engineering, oilfield equipment manufacturing, land rig and offshore drilling. KCA Deutag operates roughly 90 drilling rigs in more than 20 countries.

Parker Drilling is one of the largest offshore drilling companies in the world, and it is an expert in advanced drilling solutions and is a key entity in the global energy industry. Operational across the world, Parker Drilling specializes in complex offshore-onshore drilling projects, rental tools and project management. The latter includes specialized options such as rig design and construction, alongside the management of its operations.

Other top offshore drilling companies in India, China, the USA, or other regions can be found in Technavio’s Global Offshore Drilling Market Report 2018-2022. Click HERE to get a market snapshot for FREE!

This is a real resume for a Tool Pusher in Farmington, New Mexico with experience working for such companies as M&m Well Service, Rocky Mountain Well Service, Black Hawk Energy Services. This is one of the hundreds of Tool Pusher resumes available on our site for free. Use these resumes as templates to get help creating the best Tool Pusher resume.

The U.S. Chemical Safety Board will consider launching a larger investigation into the deadly Oklahoma rig explosion that claimed five lives on Monday... Read More