workover rig elevators factory

The automatic operation equipment for minor workover is mainly composed of a wellhead operation device, hydraulic elevator, pipe and rod transmission and arrangement device and electro-hydraulic control system.

The device adopts the structural form of dispersing the functional modules and integrated installation on the workover rig: with the hydraulic tong, manipulator and anti splash snap device set on the derrick of the workover rig, which can expand and rotate, and the safety slip is installed above the BOP.

The device only needs to install safety slips, which realizes rapid installation and migration and shortens the auxiliary working time. The device has the function of moving back and forth, left and right, which is convenient to align the wellhead. The height of the hydraulic tong is adjustable and can adapt to the wellhead with different heights. Hoisting equipment and special transport vehicles are not required for the installation and removal of the device.

The main electric control box can be installed on the operation vehicle or integrated into the modular wellhead operation device. The make-up torque of various oil pipes is set on the touch screen to realize automatic make-up and break-down. Equipped with video monitoring, process prompt, safety alarm, etc. The control system has a perfect action interlocking function to ensure the safety and reliability of the workover operation process. All of the electric cabinets, sensors, connectors meet the requirement of Explosion-proof on field.

Single Joint Elevator also called Auxiliary Elevator. Lake Petro provides Single Joint Elevator with SJ type, SP type and SJX type. All of these elevators are designed and manufactured according to 8A/8C spec.

SLX auxiliary elevators are hoisting tools for handling single pipes or working together with the professional tools CRT to move the tubulars from gate to well centre.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The global elevator and escalator market size is estimated at around USD 79.9 billion in 2021. This huge figure is expected to increase at a compound annual growth rate (CAGR) of 6.4% up till 2028. With such promising current market size and market growth rates, it can be a good idea for businesses to enter the industry. One way to capitalise on this market is by buying wholesale elevator links for drilling rig and reselling them to installation and repair service businesses, malls and landlords. You can also use them directly as part of your own business.

When buying or selling wholesale elevator links for drilling rig, it is important to understand the different types of elevators there are. Hydraulic elevator components are different from traction elevator components. Hydraulic elevator components include a tank, motor pump, valve, and actuator. Meanwhile, a standard traction elevator will have a motor, drive sheave, brake and machine bed plate.

Understanding the type of elevator links for drilling rig your customers use or are looking for can help you to recommend the correct elevator links for drilling rig for them. Sometimes, even if all the elevator door parts and other elevator links for drilling rig are perfectly fine, it may be good for your customers to have elevator spare parts in case of emergency.

Rack-and-pinion elevators are an ideal choice for construction and industrial applications. Century Elevators provides rack-and-pinion elevators and hoists that are self-contained and install directly to an existing or emerging structure, making them ideal for commercial and industrial sites of all types including new construction, restorations, building additions, renovations and maintenance. We specialize in vertical access equipment designed for outdoor use in harsh environmental conditions - including hazardous-area elevators and hoists suitable for NEC and IEC explosive-dust environments.

The team at Century Elevators includes dedicated safety personnel, designers and installers allowing for a turnkey design and installation experience. Equipment can be provided with custom capacities, dimensions, material selections and configurations.

Watson/Hopper, Inc. was incorporated in the State of New Mexico in May 1993. Watson Hopper is 100% owned by Watson Truck & Supply, Inc. which has been in business since 1943. Watson Hopper is engaged in the manufacturing and sale of replacement parts for Hopper rigs, as well as the manufacturing of new well service units, which are called Watson/Hoppers. In November 2003, Watson/Hopper also acquired the blueprints, drawings and trade name “Corsair” from the Crane Carrier Company of Tulsa, Oklahoma. Watson/Hopper markets and manufactures replacement parts and new equipment for the Corsair line of rigs. The company has been in the same family since 1943.

Oilfield Supply, LLC provides all the parts and handling tools needed on well service rigs. This includes blocks, tongs, slips, elevators, weight indicators and anything else you can imagine. We strive to be able to provide a one stop shop for all your needs.

Our continuing operations include: Full Service, Franchised International Truck Dealer, Authorized Dealer for Allison and Cummins, Oilfield Supply Store with nationally recognized brands represented for blocks, tubing tongs, rod tongs, slips, elevators and just about anything else you need in the oilfield. We have a fantastic facility for refurbishment, repair and fabrication of virtually any type of heavy equipment which we call our Unit Shop.

Watson Hopper which is a wholly owned subsidiary of Watson Truck & Supply offers the Watson Hopper, Watson Corsair product line of workover rigs as well as the Raven pump. Our facility in Hobbs is API 4(f) certified. Our welding programs are overseen by two certified weld inspectors (CWI) and our engineering department is headed by a Professional Engineer (PE).

Offshore Drilling Derrick elevators are custom engineered to be permanently installed to meet the needs of various types of platform derricks including drill ships, fixed platforms, jackups, and semisubmersibles. GEDA personnel elevators are designed to withstand the mechanical stresses of the derrick structure continuous natural heave, pitch, and roll movement.

GEDA Elevators are ISO 9001-2008 Certified, and meet ANSI A17.1, EN-81 code requirements, and can are certified to meet DNV, ABS, NORSOK, Inmetro, and USCG requirements.

Elevator slips #Elevator #slips Our business covers drilling rig, workover rig, solids control equipment, drilling rig supporting and drilling strings and other equipments related with petroleum. Strictly abide by ISO9001 quality system certification and API standard. Looking forward to cooperating with you!

We have a stock of elevator bails that have been refurbished, available with no lead times. Drilling rig elevator bails are a simple piece of equipment, but one that is always in demand. Why pay new prices, when we can provide you with refurbished rig equipment that can do the same job, at a much lower price point?

Elevator bails are manufactured from strong, straight rods, with both ends ending in a loop or eye. The bails are supplied in pairs, and are used to connect the elevator to the becket. This enables an elevator to be deployed, and lowered into the drilling hole. If a travelling block is used, and attached to the beckets, the drilling rig elevator bails help to create distance between the elevator and the travelling block. This gives rig workers more space to work with, and also lowers the potential risk of injuries.

We understand that in the Oil & Gas industry, lead times for even simple equipment such as these elevator bails can be long, when buying in new. We have an option for you. Our equipment is available right now, straight from stock. These bails are just as effective as new equipment. With no moving parts, these bails can last for decades of constant use. So why suffer long lead times and inflated prices, when we can sell you some reconditioned bails at a fraction of the cost of new, and deliver them straight away?

These elevator bails are in excellent condition, and are ready to ship straight from stock. No lead times, and competitive pricing make these bails a simple choice. Refurbished rig equipment offers price benefits over buying new. Lowering the cost of ownership. Furthermore, buying refurbished drilling equipment lowers the overall carbon footprint of the industry. Reusing equipment rather than manufacturing new.

IRE specialises in such equipment. We have a history spanning two decades in providing the Oil & Gas industry with quality, refurbished parts and equipment. Every member of our team has spent many years working in the industry, and fully understands the unique challenges that you face when procuring drilling equipment such as these elevator bails. We are happy to provide you with more information about these bails, or any of the other rig equipment we have available. Our team will be happy to help, and provide you with the benefit of their experience to ensure you make the right buying choices. You can contact us by calling +971 6 526 2556, or by emailing sales@irefzco.com. Alternatively, send us a message using our contactform.

Our Rig 8 is a Service King Manufacturing double drum back in unit The drawworks main drum is grooved for 1” wire rope and the sandline drum is fitted with 9/16” sand line. This unit is powered by Series 60 Detroit Diesel electronically controlled engine with an Allison CLT-750 six speed automatic transmission. The derrick is a SKM 96 ft double, hydraulically raised and scoped with a rating of 220,000 lbs. with 6 lines. This rig comes with a self-contained 14’ wide x 10’ long adjustable working floor. The floor has a working height of up to 14’. It comes complete with stairs and handrails. Complimenting the Rig are Oil Country tubing tongs, Oil Country type “C” air slips, elevators for 2 3/8” and 2 7/8” tubing and 6 joints of 2 3/8” tubing. The above equipment will be supplied with a 4 man crew and a Tool Pusher.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Company covers an area of more than 40,000 square meters, registered capital 50.8 million Yuan. And its main products include manual tongs series, slips series, elevators series, elevator links series, bushing series, casing spider series and pneumatic slips series etc. There are 12 products won the national utility model patent product, one invention patent products, five high-tech products, 2 in Nantong famous brand product.

Our products have been sold to various domestic oilfields and exported to Europe, America, Middle East, Central Asia, North Africa and South-East Asia and other overseas regions. Equipped with excellent equipment, strong technique force and completed test facilities, the company constantly innovate and expand market. Now the company has become a first-level supply member of Chinese Petroleum & Natural Gas Consortium, as well as the member of China Petrochemical Material Resources Market. We have obtained the Production License issued by the nation. Strict quality control has allowed us to gain the ISO9001-2008 certificate of quality management system, ISO1400:2004 environment management system certification and GB/T28001-2011 occupational health and safety management system certification and have the right to use API Spec 7K, 8C monogram. Since 2004 and has become a network members Petrochina, CNOOC, Sinopec level, won the "private technology enterprises in Jiangsu province" title, and won the "enterprise credit AAA level" and Nantong "contract" AAA level enterprise title Exploring the way forward in practice and surpassing self in innovation, our ‘Zero Defect and Zero Distance’ service purpose is bringing us more and more business partners.

Type SP auxiliary elevators are designed and manufactured in accordance with API Spec 8C in our company. They have a complete range of sizes. They are widely used in drilling, servicing and cementing for oil and gas well. Type SP auxiliary elevators are the requisite hoisting tools for catching pipe with degree up and down.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The oil and gas industry has a history of collaboration between organizations, including operators, contractors, manufacturers and distributors, in efforts to continuously improve efficiency and safety. Incidents are often triggers that lead to this type of collaboration. This article highlights an example where an incident led to a drilling contractor, manufacturer and distributor to work together to design, produce and put in place a tool that will greatly reduce the chances of similar incidents reoccurring and, thus, improve safety on the job.

The incident occurred in April on a Sidewinder Drilling rig in Oklahoma during a routine operation. It was 9:30 p.m., and the crews were pulling out of the hole and laying down drill pipe at the end of the well. The drill pipe elevators were fitted with a piece of rope approximately 3 ft in length for the purpose of tripping the elevators open. There were scattered thunderstormsat the time with gusty winds and occasional rain and hail. The rig is equipped with a top drive with a link tilt system and a hydraulic catwalk machine.

After breaking one of the connections in the rotary table, the driller picked up on the joint, and the floormen pushed the pin end of the joint in the trough of the catwalk. The driller then started to lower the joint into the trough. After lowering the joint approximately 8 ft, the elevators tripped open, causing the joint to fall into the trough, bounce up over the V-door post and fall to the rig floor between the V-door post and stands of pipe racked back in the derrick. The floorman was standing near the setback area and was struck by the joint of drill pipe, resulting in a restricted work case injury.

It has been an accepted practice in the drilling industry to use ropes on elevators for the purpose of tripping them open while laying down drill pipe. The length and configuration of the rope varies widely from company to company and often from rig to rig.

As a result of the incident, Sidewinder began searching for an alternative to ropes as a means of tripping the elevators open for this task. During this search, the company found that a casing company employee had constructed some homemade straps out of old fall protection lanyards. He offered one of the straps to the crews on a Sidewinder rig. The company’s risk assessment matrix and MOC process were used and determined it was safe to proceed with testing it on the contractor’s elevators. The general concept appeared to be a good starting point for an alternative to ropes.

Sidewinder created a drawing of this concept with some modifications and contacted Billy Pugh Co and Dooley Tackaberry for assistance with designing and manufacturing a prototype for testing on the rigs. The first prototype, which was a strap with flexible loop style handle and swivel snap hook, was sent to the field for testing. Once feedback came in from the rig, Sidewinder and Dooley Tackaberry reviewed the findings.The information in the report was then sent to Billy Pugh for modifications, and a second prototype was assembled for testing. The new design included a strap with large plastic ring and swivel snap hook.

After the second prototype was sent to the field for additional testing, rig employees provided additional feedback, and more modifications were suggested. The third prototype consisted of a strap and a rigid metal ring and rigid snap hook.

With one more minor “adjustment,” again based on surveying employees in the field, a fourth and final design was developed. The final design change was simply to add a stronger metal ring for strength and durability of the device. This new safety product has ultimately become Part Number ELS-1A and is the standard elevator strap for use on all Sidewinder rigs.

Sidewinder’s operating procedures have been revised to include the use of the elevator strap for all drill pipe laydown operations. Ropes are no longer allowed on elevators.

In conclusion, the collaboration among Sidewinder, Dooley Tackaberry and Billy Pugh was a great example of bringing together the best resources for a common goal. By creating this new product – where employees in the field had the majority of the input in its creation – there will be multiple benefits.First, it creates a safer work environment. Second, it demonstrates to employees that their input is critical. Third, it shows that the company takes safety on the rigs very seriously. The goal is to reduce incidents to zero, and collaborations like this fit this goal and Sidewinder’s culture perfectly.