workover rig floorhand duties in stock

Maintains tubing, rod tongs and hand tools on the rig. A minimum of one (1) year rig floor operation experience. Keeps pipe deck and main deck areas orderly.

Maintains tubing, rod tongs and hand tools on the rig. A minimum of one (1) year rig floor operation experience. Keeps pipe deck and main deck areas orderly.

May be required to work floors or operate the rig when needed. Assists in picking up or laying down tubing, manually lifting the tubing from the rack onto the…

Performs housekeeping around rig, keeping rig floor clean and clear of tools after each trip. Assists in drilling rig erection (rig up) and dismantling (rig…

Available to work to tight deadlines. Works as crew member during the actual installation/work. Other duties as directed including but not limited to driving…

This can include a variety of tasks and responsibilities. Being a Floorhand can involve taxing physical labor but is the starting point to progressing into other less strenuous work aboard an oil rig.

All in all, there is definitely no shortage of work for a Floorhand! This is why Floorhands are considered to be an integral part of the drilling rig crew.

If you don’t have much experience and find yourself being overlooked for Floorhand positions, you can always start off as a Leasehand. These are the individuals who perform general labor and maintenance on an oil rig.

Keep in mind that this is an entry-level position so the starting pay isn’t going to look extravagant. However, by working as a Floorhand, you have the opportunity to gain valuable skills and work your way up in the oil and gas industry.

After being a Floorhand, you can move up to the position of Motorhand. Motorhands are responsible for the maintenance of engines and other machinery on the rig and can expect to make around $33 per hour.

Service rigs, however, do not employ Motorhands. Instead, those job responsibilities are left to the Derrickhand who (on both service rigs and drilling rigs), works on the platform. These positions earn an average of $30-$38 per hour.

Most Floorhands will eventually aspire to become a Driller or Rig Operator. This is a supervisory role that oversees maintenance and safety practices and is second-in-command to the Rig Manager. Drillers earn approximately $34-$44 per hour.

Lastly, you can eventually make it to the senior-most position on an oil rig:. This role requires years of experience but it is certainly not outside of your reach. Rig Managers can earn a salary of over $90,000 per year.

The Floor hand is responsible for performing service rig functions to ensure continuous production in line with established standards. They work on oil and gas drilling rigs under the supervision of a driller, perform routine inspections on equipment, and conduct maintenance checks.

Also, they help in removing or installing wellhead and associated equipment and report safety hazards, accidents, or maintenance issues to the rig operator or supervisor. Additionally, they service gas and oil wells and transports rigs, and other vehicles. The floor hand also performs other tasks as assigned.

POSITION OVERVIEW : Leads a one to five person rig crew while safely operating well servicing or drilling rig components. This is a safety sensitive position.

NOTE: * This is a safety sensitive position. Essential mental alertness requirements, which include the following, are required to be met as part of the essential job functions, and must be met by Basic Energy Services applicants and current employees. To be considered and eligible for hire, each and every applicant and employee must: Work in a constant state of alertness and safe manner Have, display & maintain the ability to perform tasks involving high levels of cognitive function and judgment Not be mentally or physically impaired from any cause, that can adversely affect an employee s ability to safely and completely perform the duties of the position Have, display & maintain the ability to work in an unfatigued state Have, display & maintain the ability to accurately gauge lengths of time and distance Have, display & maintain the ability to quickly store and recall instructions in one s short term memory Have, display & maintain the ability to concentrate Have, display & maintain the ability to cope with sudden changes in surrounding and/or emergency situations and/or alarms Have, display & maintain, demonstrated caring, committed and concerned attitude about safety

ND Energy Services is looking to hire experienced Workover Rig Floorhands with a strong work ethic and willingness to learn and grow with the company.

Due to the technical and security risks inherent on the Internet, and because the document you access may differ from the original depending on your browser software, the information set out in this web site should not be used for the purpose of making decisions with respect to AKITA Drilling Ltd. securities. The information posted was accurate at the time of posting, but may be superseded by subsequent disclosures. If you are contemplating trading in AKITA Drilling Ltd. securities, you should contact Investor Relations to obtain printed copies of the documents you wish to review or access them through the SEDAR website at www.sedar.com.

A Workover Rig Floorhand is responsible for all activities conducted on the workover rig floor by performing but not limited to the following duties :

Description :Ran floors, picking up the pipe, picking up rods, pump change-outs, trip pipe, run tubing board, assist driller, hammer, setup pump, rigging up, rigging down.

Objective :Experienced Floor Hand with over one plus years of oil field experience. Very familiar with several different types of drilling rigs and workover rigs. Also skilled at welding and other trades. Seeking a career where my diverse experience and training in management, leadership, and teamwork can help support the company"s vision.

Objective :Highly motivated Associate Floorhand seeking a full-time position to utilize my current skills and knowledge with the opportunity to learn and grow within the company. Responsible and motivated to handle tasks with accuracy and efficiency. Aspires to become a leading role in a company setting. Excellent communication and time management skills. Acquires new tasks quickly and proficient in growing key relationships.

Job Description TheFloorhandposition is a rig crew member whose primary work station is on the rig floor, however the duties and responsibilities are prominent in every aspect of drilling the well, manual handling of tubular and tools, making up or breaking out during...

16 days ago...their operational goals in a safe and efficient manner. Withexperiencein both harsh-environment regions and complex drilling situations... ...Wellbore to get the job done. Job Description TheFloorhandposition is a rig crew member whose primary work station is on...

24 days ago...practices, please refer to the Nabors Code of Conduct. Title:FloorhandOverview: The job of the Floorhand is to safely and... ...Preferred Qualifications: • High school diploma or equivalent • 7 monthsexperienceas a Floorhand for another drilling company...

9 days ago...FloorhandCompany Description Headquartered in Reno, Nevada, Ormat is a leading geothermal company and the only vertically... ...Perform other duties as directed Qualifications EDUCATION,EXPERIENCE,AND SKILLS REQUIRED The ability to understand procedures and...

a month ago...American and International marketplaces. Our workforce, like our technology, is rapidly expanding and looking for a qualified CasingFloorhand.JOB RESPONSIBILITIES Assists the Crew Pusher and/or TRS Lead in carrying out all routine, non-routine and emergency...

9 days ago...LOCATIONS INCLUDE: COLORADO, WYOMING, NEW MEXICO   TheFloorhandperforms the duties of general manual labor on the rig and supports... ...command and follows through on instructions Education andExperiencePrior experience in oil field, heavy industry or...

a month ago...SafeGulf, and Well Control Must provide proof of authorization to work in the United States. Have previousexperienceworking as an DeepwaterFloorhandPossess or be willing to obtain an OGUK Medical & 10-panel drug screen. Have knowledge and the skillset...

3 days ago...JOB SUMMARY TheFloorhandsafely performs drilling, tripping, rig moving and maintenance operations as directed. ESSENTIAL FUNCTIONS... ...standards, ensures smooth operations and positive customerexperiences,builds a productive workplace, is reliable, and improves team...

more than 2 months ago...ND Energy Services is looking to hire experienced Workover RigFloorhandwith a strong work ethic and willingness to learn and grow... ...Driver"s License Class A or B CDL, preferred Education &ExperienceHigh School Diploma or equivalent Previous workover experience...

a month ago...FloorhandJob Summary: This job role will oversee the inspection, maintenance and repair of equipment implementing company procedures... ...given.    Requirements: - Previous offshore drill rigexperience-THUET, FOET or BOSIET - preferred -TWIC or TWIC renewal...

9 days ago...The Well ServiceFloorhandis responsible for all activities conducted on the rig work floor, operation of the mud pump, and fluid... ...Respects chain of command and follows thru on instructions Priorexperiencein oil field, heavy industry or construction is beneficial...

a month ago...Precision Drilling   Are you looking to begin your career as aFloorhand,a Roughneck on an oil and gas drilling rig? Do you enjoy a... ...we are always looking for experienced candidates. If you haveexperienceas a Motorhand, Derrickhand, Driller or Rig Manager, please...

more than 2 months ago...The Well ServiceFloorhand& Derrickhand is responsible for the Rig Derrick, its security, maintenance and safety. This job is... ...Respects chain of command and follows thru on instructions Priorexperiencein oil field, heavy industry, or construction is beneficial...

16 hours ago...strength: We appreciate and celebrate everything that makes us unique: age, national origin, citizenship status, perspectives,experiences,physical or mental disability, military status, race, ethnicity, religion, gender, sexual orientation, gender identity and/or...

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Designed to meet the oil and gas industry"s need for an educated and prepared workforce, Lone Star College is now offering an Oil and Gas Drilling Floorhand Roustabout program. Classroom and lab training will provide entry-level knowledge and skills needed for workers in the drilling and exploration sector of the oil and gas industry. Upon successful completion of the Floorhand Roustabout program three nationally recognized certifications will be provided by the International Association of Drilling Contractors (IADC®).

Lone Star College is the first provider to offer the Floorhand Roustabout Fast-track career certificate that has been accredited by the International Association of Drilling Contractors (IADC), for the Knowledge, Skills and Abilities (KSA) competencies in relation to the Workforce Attraction & Development Initiative (WADI) Project. The WADI project was a world-wide effort to attract and provide the industry with greater number of screened, rig-ready new hire candidates. The collective courses in our Floorhand Roustabout Fast-track career certificate program have been approved to provide the training vital for entry level oil and gas personnel.

Are you looking to begin your career on a drilling rig? Do you enjoy a fast-paced, team-oriented environment? If so, look no further than Precision Drilling! We are looking for High Performance candidates with grit and drive to join the Precision Family in Texas. The entry level position at Precision is a Floorhand.  As a Floorhand, you’ll be on the front lines ensuring we deliver High Value solutions to our customers.

The Floorhand is responsible for safely and efficiently performing a variety of physically demanding tasks on and around the drilling rig, supporting equipment, structures, and rig systems. Responsibilities of the Floorhand include:

Performing repairs and preventative maintenance of the drilling equipment and other components of the rig while adhering to Precision maintenance standards;

Miscellaneous duties including but not limited to offloading/backloading trucks, nipple up/down, care of the blowout preventer (BOP) system, and monitoring the operation of the shakers, return tanks, mud pits and chemical sack area.

As a Floorhand at Precision you will receive an hourly wage of $26.95 per hour, a $35 per diem and on the first day of the month following or coinciding with 60 days of continuous service you will be eligible for our comprehensive benefits including medical, health, and dental plans.

The Yard Hand is responsible for keeping the yard location and shop clean, picked up and clear of safety hazards. It is necessary that every hand be mentally alert and physically fit during the workday. The Yard Hand will assist in sorting and staking incoming and outgoing materials and inventory. Responsibilities include assisting welders, mechanics, and/or electricians. General assembly of drilling equipment is required along with minor sandblasting and painting. Driving a Fork Lift (after receiving Fork Lift Training Classes) will be included in the general duties. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 50 times in a 12 hour period. The ability to lift items weighing 50lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 25lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 50 lbs. The work performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

There are two floor hand positions: Floor Hand and Lead Tong Hand. Each must daily inspect the tongs, breakout line, snub lines, and tong dies for damage, excessive wear, fraying oil soaks, etc. and keep them safe and in good repair. During normal drilling operations duties include washing, cleaning, mechanical repairs, digging ditches, drill pipe connections, drill pipe trips and other manual handling and/or maintenance activities as required by operational needs. While tripping (adding additional pipe to the stand), the Lead Tong Hand must pull and install the busing assembly. This activity will include lifting the tongs and lateral movement of the tongs to attach them to the drill pipe. The tongs are on counterweights and the exertion required to lift them would vary, but is estimated to be similar to lifting weights between 10-30 pounds. The lifting range up or down is 1-2 feet, in the area of the waist. This activity is repeated and could be performed as many as 175 times in a 12-hour Shift. Another activity conducted between tong usages is “pulling the slips.” This activity is performed by 2 or 3 men (depending on crew size) and could be conducted as many as 175 times per a 12-hour shift. The slips weigh between 100 and 175 pounds and the weight would be distributed between the 2 or 3 employees. The slips are located at floor level and would be lifted a distance of 18-24 inches. Racking pipe is another function performed by one of the Floor Hands during a drill pipe trip and involves manually pushing a suspended length of pipe to the area where it is racked. The reverse activity involves restraining the suspended pipe and guiding it across the rig floor. This activity is performed in the standing position and could be performed as many as 100 times per a 12-hour shift. Tripping the pipe string is an operation which involves removing all of the pipe from the well bore and racking it in the derrick. The pipe may be removed for various reasons, but usually is done to replace a drill bit on the end of the drill string. After the operation is complete, the pipe is “tripped” back into the well bore. The tripping operations vary depending on the depth of the well and other factors. Employees may be involved in the tripping operation for the full 12 hours of their work shift. The Floor Hand is responsible for catching and cleaning samples of formation cuttings while drilling. If drilling in gas, he must keep the flare bucket burning. At times it is necessary for the Floor Hand to climb up in the derrick and assist the derrick hand such as bridling up or bridling down. He must also be able to go up and grease the traveling blocks and bridle line sheaves. All hands working together must keep the rig clean, picked up and free of safety hazards. It is necessary that every hand be mentally alert and physically fit during his tour. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 175 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectoralis, and Hand Grip.

The motorman’s primary responsibility is to take care of all the motors on the rig. He must have a mechanical mind and the ability to trouble shoot and identify and repair minor problems that arise. He is responsible for checking the oil, oil pressure, temperature, fuel pressure and radiator water level and to record his findings in the daily engine report during his tour. He must be mentally alert and physically fit during his tour. Other responsibilities include racking pipe on the racking board when coming out of the hole and fill pipe when going in the hole. He is responsible for operation of the closing unit when shutting the well. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 150 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 80% of the time. The ability to kneel up to 15% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

The Derrick Hand is the crew member whose work station is in the derrick while drill pipe is being hoisted or lowered in the hole. He attaches the elevators to the stands of drill pipe while the pipe is being lowered into the hole and detaches the elevators and racks the pipe while the pipe is being hoisted out of the hole. Both operations involve the use of the arms and upper body to hold or pull the pipe. This operation could be repeated as many as 80 to 100 times during a 12-hour shift. He is responsible for greasing and inspecting the crown and all sheaves in the derrick. He must be mentally alert and physically fit while on duty. Other responsibilities of the Derrick Hand include mixing chemicals. The chemicals are packaged in paper bags and plastic buckets. The packages vary in weight from 20 to 80 pounds. Lifting and carrying is required to get the materials from the storage area to mixing areas. Manual handling of the packages or bags could require lifting from floor level to levels between 36 and 42 inches high. Unusual circumstances might require the lifting of numerous bags during a 12-hour shift. He is also responsible for watching the mud pits for an increase or decrease of mud volume, mud weight, and changes in funnel viscosity and gas cut mud. He must also watch and listen to the mud pumps to know when there is a problem. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 175 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to 42" 10 to 20 times a day for a 12 hour period. The ability to carry items weighing 100lbs 10 to 20 times a day for a 12 hour period. The ability to stand up to 99% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

The Driller (crew foreman) is directly responsible for the rig crew during normal operations. He must be able to perform any job on the rig required of his hands, in order to instruct his crew on the “how to” procedure or to fill in as a Floor Hand as necessary. Refer to Job & Task Descriptions forms on Floor Hand, Motor Hand, and Derrick Hand for position requirements. He must know the safe operating limits of the rig and keep within those bounds. He is responsible for the operation of drilling and hoisting equipment. Actual rig operations involve the use of both hands and feet to operate controls. The Driller must be able to see gauges and dials at distances between 1 to 10 feet. He must be able to see the Derrick Hand at a distance of 60 to 90 feet away. He must be physically fit and mentally alert at all times to the operations taking place and crew participation. Activities will be as follows: The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

Mechanics and Techs are responsible for repairing and rebuilding equipment used on conventional and advanced drilling rigs. Employees will be trained on the job to service TOP DRIVES, MUD PUMPS, DRAWWORKS, IRON ROUGHNECKS, HYDRAULIC UNITS along with CONTROLS and INSTRUMENTATION for electronic drilling rigs. Mechanics and Techs must be mechanically inclined, work safely, able to work long hours, self-motivated, and proficient with various tools. It is necessary that every hand be mentally alert and physically fit during the workday. Also, employees must have a clean driving record and available to be “on-call”. Activities include: The ability to work and communicate with a team of people, the ability to push/pull/lift items weighing 80lbs repeatedly; the ability to climb up 20 to 50 steps, and the ability to exert a maximum level of physical activity. The majority of work will be performed outside with prolonged exposure to the environment, both hot and cold. Service calls could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet.