workover rig job description manufacturer

Workover rigs, also called pulling unit rigs, are specialized oil rigs set up for inserting or pulling pipe tubing in and out of wells. Workover crews are called when an oil well has been drilled, is undergoing repair or is being retired, as indicated by Schlumberger.

These crews are relatively small compared to other rig crews and consist of tool pushers, operators or relief operators, derrick men and floormen or roughnecks. The average workover rig salary overall was ​$65,039​ as reported by Simply Hired in 2022. Available workover rig jobs and descriptions can be found on the Rigzone website.

The acting supervisor on a workover rig is called the tool pusher. The main task of a pusher is to hire, fire and supervise contracting work crews. When contractors have an issue on site, the first person they report concerns to is the tool pusher. Pushers need to have an intimate knowledge of how each and every part of a rig works, both individually and as an overall part of the drilling operation as a whole.

If equipment fails or needs to be reordered, the tool pusher talks with suppliers to get the right parts out on site with a minimum of downtime for the rig. The pusher is responsible for the overall safety of a rig. If the tool pusher has any safety concerns, he has the power to halt production until the concern is resolved.

The operator/relief operator is next in order of responsibility to the tool pusher on a workover rig. The main task of an operator is to control the crane and derrick that hauls pipe in and out of the bored well. In smaller crews, the operator is also the one who drives the rig truck. When laying pipe into a well, the operator directs the truck or derrick to the optimum spot next to the bore opening.

The operator then instructs the derrick hands and roughnecks where to place the bore pipe for easy access by the crane or by hand-loading methods. During a well breakdown or repair, the operator directs the crew hands in storage of extracted pipelines. Because the operators work most closely with derrick hands and roughnecks, they are typically responsible for selection and maintenance of their immediate workover rig crew.

In the pulling unit rig crew hierarchy, the derrick hands come after the operator/relief operators. The main responsibility of a derrick hand is everything that is above ground on the rig. During laying operations, derrick hands assist the operators/relief operators in inserting boring into the well. During repair or breakdown, they assist the operator in pulling pipe out of the well and storing it properly.

In between laying, derrick hands have other responsibilities as well, depending on the size of the crews. In smaller crews, Derrick hands also see to the maintenance of the rig-based electric and diesel generators necessary to power rig equipment.

At the bottom of the pulling unit rig crew in terms of seniority is the floorhand or roughneck. The main task of a roughneck is to perform any kind of tasks asked by either the derrick hand or the operator. These tasks can range from assisting with laying new pipe or removal of old tubing, general construction, to moving new equipment, such as generators. Most crew members on a work-about start their career as a floorhand or roughneck before working their way up to more senior positions.

The Workover Rig Operator is in charge of operating the assigned workover rig. Additionally they are required to have knowledge of down hole tools, rod and tubing handling equipment, pump equipment and pipe wrangler equipment. They are also responsible for direct supervision of the immediate rig crew.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed in this job description are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The physical demands of this job are outlined in the Functional Job Analysis for this position and are representative of those that must be met by an employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

POSITION OVERVIEW : Leads a one to five person rig crew while safely operating well servicing or drilling rig components. This is a safety sensitive position.

NOTE: * This is a safety sensitive position. Essential mental alertness requirements, which include the following, are required to be met as part of the essential job functions, and must be met by Basic Energy Services applicants and current employees. To be considered and eligible for hire, each and every applicant and employee must: Work in a constant state of alertness and safe manner Have, display & maintain the ability to perform tasks involving high levels of cognitive function and judgment Not be mentally or physically impaired from any cause, that can adversely affect an employee s ability to safely and completely perform the duties of the position Have, display & maintain the ability to work in an unfatigued state Have, display & maintain the ability to accurately gauge lengths of time and distance Have, display & maintain the ability to quickly store and recall instructions in one s short term memory Have, display & maintain the ability to concentrate Have, display & maintain the ability to cope with sudden changes in surrounding and/or emergency situations and/or alarms Have, display & maintain, demonstrated caring, committed and concerned attitude about safety

Must have the ability to work on an oil and gas site under direct supervision. Responsible for successfully supporting operations based around work over rig operations.

II. Essential Duties and Responsibilities include the following. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned, this position is diverse and job duties may vary on a daily basis

•This position’s schedule is rotational but can vary greatly, to include any day of the week and at any times. This includes holidays, weekends, and various timeframes daily. Certain operations cannot be completed during a single daylight period and must be continued without interruption, over several consecutive days. Such operations are referred to as 24-hour operations and require multiple crews to operate the rig consistently over 24-hour periods. This position can be required to work all shifts for these operations.

Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

A Workover Rig Operator is responsible for all activities in regards to operating a workover rig, supervising a crew, and ensuring customer satisfaction with all services.

The requirements listed in this job description are representative of the knowledge, skill, and/or ability required and must be met by an individual to successfully perform the essential functions of this job.

The job operates in an outside environment. The role routinely works in all weather conditions, including but not limited to: extreme wind, rain, cold, heat, etc.

Key Energy Services-A dynamic and well respected company with a mission to be a leading global well intervention and production enhancement service company. We are the largest provider of onshore well service rigs in the United States and one of the leading onshore, rig-based well servicing contractors in the world.

Key Energy Services (Key) is an equal opportunity employer. Key does not discriminate against any applicant or employee based on race, color, religion, sex, sexual orientation, disability, national origin, age, genetic information, military status, status as a Vietnam-era or special disabled veteran, or any other basis protected by federal, state, or local laws.

- See more at: http://jobs.ourcareerpages.com/job/170454?source=ccp&jobFeedCode=KeyEnergyServices&returnURL=http://www.keyenergy.com/#sthash.7D4yxpl6.dpuf

Key Energy Services-A dynamic and well respected company with a mission to be a leading global well intervention and production enhancement service company. We are the largest provider of onshore well service rigs in theUnited Statesand one of the leading onshore, rig-based well servicing contractors in the world.

Key Energy Services (Key) is an equal opportunity employer. Key does not discriminate against any applicant or employee based on race, color, religion, sex, sexual orientation, disability, national origin, age, genetic information, military status, status as a Vietnam-era or special disabled veteran, or any other basis protected by federal, state, or local laws.

Coordinating the activities of Company"s and Contractors units involved in completion, work-over, wireline, and rigless operations and decide about day by day matters.

The Workover engineer utilizes analytical skills, practical experience and good judgement to evaluate, select, and recommend well control equipment, and to develop procedures and implementation plans, for completions, workovers and interventions.

Engineering skills from a petroleum or mechanical engineering and practical applications provides the basis for this position"s responsibilities and job requirements; although a person without a technical degree who possesses relevant, practical experience could meet such requirements.

The Workover engineer is also expected to work closely with workover rig contractors and third-party consulting firms on well control matters in a multitude of environments.

2+ years previous oilfield and/or workover rig experience preferred. Work on floors or derricks on the rig as needed. May offer relocation package DOE.

Operating a derrick equipped workover rig: 1 year (Required). Production maintenance (tubing/rod jobs) and plugging work. 10 days on 4 days off schedule.

The Crew Worker, under the direction of the Rig Operator, performs activities and operates hand and power tools to perform maintenance and repairs to oil or gas…

Looking for experienced Floorhands for Workover Rigs in North Dakota. Full benefits, competitive pay with desirable schedule of TWO WEEKS ON / TWO WEEKS OFF.

*Floor Hands - *minimum experience required 6 months. *Derrick Hands - *minimum experience required 1 year. Job Requirements: *Job requirements include but are…

Manages tools on the workover rig floor and assists in daily maintenance. Picks up/lays down pipe and latches tubing in elevators. This is a full-time position.

Manages tools on the workover rig floor and assists in daily maintenance. Must have a minimum of 1 year of experience as a workover rig floorhand to be…

The successful candidate will have an outstanding track record of success in workover rig experience in operating heavy equipment while ensuring communication…

Crew Member positions include Rig Trainee (no experience required), and Floor hand, Derrick hand, Relief Crew Chief, and Crew Chief, which are experience…

As a rig hand, you will need to safely complete tasks and operations as the onsite supervisor instructs. You will be responsible for all aspects of maintaining…

 Minimum 5 years production rig workover experience. Rig workover: 5 years (Preferred). The Gorilla Jack is designed as a supplement to workover rigs and is…

Spot in, rig up, and rig down well service unit (rig). Minimum of 1 year operating rig. Workover rig experience (minimum 6 months verified experience).

The Workover Rig Floorhand/Derrickhand assists the Operator in a multitude of functions including: tripping pipe, handling tongs, making connections, cleaning, operating machines and maintenance of equipment used on a workover rig.

Essential Job Functions and Responsibilities include the following. Other duties may be assigned.Perform services on oil and gas wells as part of a 3-5 person workover rig crew

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and / or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The physical demands of this job are outlined in the Functional Job Analysis for this position and are representative of those that a worker must meet to perform successfully the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Roustabouts are manual workers who are typically employed in the oil and gas drilling industries. They have varied duties to keep the oil and gas rigs run efficiently and safely. Other responsibilities include maintaining the cleanliness of drill sites, transporting and storing materials and supplies to work areas, and installing equipment. They also conduct repairs on broken pumps and other equipment and maintain tools for drilling and extraction. This role"s skills and qualifications include a high school diploma, familiarity with site safety procedures, and physical and mental stamina.

A floor hand is an employee who performs a variety of manual labor tasks in a rig site. Floor hand employees take charge of handling pipes, drilling, and casing equipment. Their responsibilities include rig component equipment repairs and maintenance, assigned activities on the rig floor, and rig up and down movements. They are considered as foundational employees working on the derrick floor. Often, they handle the tough physical jobs on the site.