old hydraulic pump manufacturer
Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.
The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.
When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.
First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.
Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.
Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.
All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.
Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.
To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.
When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.
Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.
Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.
Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.
Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.
External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.
Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.
Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.
Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.
Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.
Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.
Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.
Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.
Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.
Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.
Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.
To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.
To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).
Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.
The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.
Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.
Since 1935, Muncie® Power Products has been a leading source of mobile power components to the truck equipment industry. In addition to Power Take-Offs and hydraulic motors, Muncie offers directional, pressure and flow control valves as well as system design capabilities. Call us today or visit our website for more information.
FluiDyne is an ISO certified manufacturer of hydraulic pumps, motors & valves. Our promise is to serve and respect the rebuilders and resellers of North America and the global market with high quality new and remanufactured pumps, motors, valves, filters and filter elements.
Having innovative solutions for mission-critical applications makes Hydraulics Technology the preferred. For over 25 years, our impressive list of hydraulic pumps has met the needs of various applications. In assuring the highest quality products to our customers and meeting their expectations, Hydraulics Technology maintains ISO Certification. HTI is ISO 9001:2008 Certified.
Industrial Flow Solutions is a trusted manufacturer of hydraulic pumps and centrifugal pumps. We pride ourselves on our high-quality products and personalized customer service. Various industries we serve include industrial, food & beverage, and medical. All of our products are tested to ensure quality and durability.
AeroControlex began manufacturing pumps in Cleveland, Ohio in 1945. Over the years, AeroControlex has established itself as an industry leader in the production of hydraulic, fuel, lube and scavenge, centrifugal and coolant pumps. Our worldwide customer base demands the highest quality, cost effective products for the most demanding commercial and military applications.
All World Machinery Supply offers high-quality, affordable pumps, motors, and power units from reputable brands like Daikin, Nachi, Eaton, Tokimec, NOP, Grundfos, Yuken, and Fuji . Our team of representatives and engineers can find or cross any pump/mortor to what you are looking for. We can even help you design a custom application suited to your fit your needs.
American Eagle Accessories Group is a manufacturer of truck equipment accessories. These products include: hydraulic-driven air compressors, drawer systems (tool storage), bolt bins (fastener and fitting storage), lube skids, lube trailers, fuel trailers, and utility construction trailers. All of our products are designed and manufactured in the U.S.A.
Founded in 1991, AZ Hydraulic Engineering manufactures high quality air-operated hydraulic pumps serving a broad clientele. We offer hydraulic piston pumps, power units, tank pumps and more with 25 different pressure ranges up to 50,000PSI and a proven track record for reliability and easy, low cost maintenance. AZ Hydraulics is the source for quality hydraulic pumps and friendly customer service.
Barbee Engineered Testing Systems is a manufacturer of hydraulic power units, hydraulic valve testers, air-driven hydraulic piston pumps, high pressure pumps, hydraulic power systems, high pressure systems and more. Our hydraulic pumps are available with up to 30,000 PSI. Check out our website.
Berendsen Fluid Power is one of the largest distributors of pneumatic and hydraulic products in North America. We distribute from quality manufacturers products such as hydraulic pumps, hydraulic motors, hydraulic gear pumps, mixer pumps and more. Visit our website for more information.
Bosch Rexroth is a global leader in manufacturing industrial hydraulics, including proportional and servo valves. Directional control, high response, flow control, pressure relief, pressure reducing, and servo valves name some of our products. Our rugged valves are a perfect fit your electrohydraulic control applications. A variety of models are available for your viewing on our website.
Brand Hydraulics is a leading designer and manufacturer of high-quality hydraulic valves including hydraulic directional control valves, hydraulic flow control valves, hydraulic relief valves, hydraulic selector valves, shuttle valves, pilot check valves, flow dividers and more. Brand also has a line of quality hand-operated hydraulic pumps. Premium hydraulics since 1956.
For 40 years, Bucher Hydraulics, Inc. has specialized in hydraulic systems, including products such as hydraulic motors and hydraulic power units. Applications include concrete pumps, forage wagons, harvesters, lifting devices, recycling machines, door openers, log splitters and many others.
A Cascon hydraulic pump is used in a wide range of OEM equipment market applications. Whether you"re in the aircraft & aerospace, chemical, gas turbine or industrial or mobile markets, our hydraulic pumps and specialty pumps will meet your requirements and provide solutions that an off-the-shelf pump cannot. Contact Cascon, Inc. today for more information!
CAT PUMPS specializes in high pressure pumps, reciprocating pumps, positive displacement pumps, plunger-piston pumps and we also manufacture hydraulic pumps and hydraulic power units. We are an industry-leader in customer service and quality triplex pump design and products.
CLYDEUNION Pumps is one of the world"s leading pump companies - a centre of excellence in Pump Technology, Hydraulic Design and Engineering. We are structured to provide a specific focus on each of our customer"s key markets as well as providing full global aftermarket support. CLYDEUNION Pumps incorporates an accumulation of over 300 years of engineering expertise.
We have over 55 years of experience in manufacturing hydraulic components. CROSS Manufacturing, Inc. distributes hydraulic filters, hydraulic cylinders, hydraulic gear pumps and hydraulic systems worldwide. Our hydraulic systems are used for automotive, agricultural, mining and construction purposes.
D&D Machine & Hydraulics Inc, located in Fort Myers, Florida, is a manufacturer of hydraulically driven, submersible pumping systems that serves the Agricultural, Construction, Industrial, Mining, Petroleum and Municipal markets worldwide. More than 45 years ago, D&D realized the unlimited potential of hydraulics. Since then, D&D has revolutionized the dewatering industry with a series of hydraulically driven pumps that provide the most technologically advanced and precisely engineered features available today. Specifically, D&D builds electric or diesel-driven Power Units and Axial Flow, Trash, Sludge, Slurry/Digester and Mixed Flow pump heads. The flow capacity of these pump heads range from 450gpm to 55,000gpm and heads of 250 feet are attainable. If a standard pump will not meet the performance needed for a special application, D&D’s wide range of specialty pumps can meet your individual requirement.
When the owners acquired D&D, it was a four-employee, custom machine shop that repaired pumps used by local farmers. Shortly thereafter, D&D began to manufacture hydraulic pumps for a local sales and rental company. In the 1980s, as the business grew, D&D began to sell to other customers throughout the country, eventually achieving global recognition.
Danfoss will drive your vehicle transmission to a new level of performance with our Danfoss piston pumps and motors. Designed for intelligent vehicle management systems, our range brings you closer to your goals for reduced fuel consumption and high operator comfort. We deliver components and systems for machine from 15 to 2500 horsepower.
We create hydraulic pumps that can be utilized for standard and specialized purposes. Our high pressure pumps can handle pressures from 3,000 to 15,000 psi with flows of 200 gpm. Our systems can also perform with various fluids including mineral-oils, low-lubricity fire-resistant fluids. We are dedicated to developing the most reliable hydraulic pumps!
Eaton Hydraulics designs, manufactures and markets a comprehensive line of reliable, efficient hydraulic systems and components including hydraulic motors, hydraulic power units and other hydraulic systems. We serve various markets and applications with our quality systems and accessories.
We offer and repair hydraulic pumps and hydraulic motors. As one of the biggest suppliers of hydraulic power units (original or replacement) and a worldwide distributor, we can ship anywhere in the world immediately. Our inventory of motors is immense and our sales staff has years of experience.
Welcome to the Florida Hydraulic Industrial web site. Browse our categories for hydraulic pumps, hydraulic cylinders, hydraulic and industrial hose, including a wide variety of pressure washer hose, all common hydraulic hose fittings.
Flowserve® is the world leading manufacturer of quality hydraulic pumps — air piston pumps, hydraulic water pumps, vane pumps, entire hydraulic systems, plus valve repair. Our products are used by many industries — chemical; hydrocarbon processing; oil and gas; power; water resources.
Fluid Power International provides expertise in hydraulic pump repair & replacement. We specialize in repairing & replacing metric pumps & motors for Japanese and German heavy machinery as well as hydraulic components for excavators. We will tear down and inspect your part with no obligation.
Established in 1978, Gator Pump manufactures high volume pumps for irrigation, flood control, liquid waste pumping and many other applications. Steel fabricated hydraulic pumps are offered in several different sizes and configurations including vertical pumps, floating pumps and trailer pumps as well as custom pumps operated on electric, diesel or hydraulics to suit clients" needs. Call us today!
We provide a number of different styles of air driven high pressure hydraulic pumps ranging from 100 PSI to 60,000 PSI. Here at High Pressure Technologies, LLC we take customer satisfaction very seriously which is why we can customize our products to match your requirements. It is our goal to exceed your expectations. Please visit our website or give us a call today to learn more information!
We started developing hydraulic drive submersible pumps in 1977. We can provide you with a hydraulic pump, hydraulic gear pump and hydraulic power unit to match. If a standard system doesn"t meet your needs, we can custom design one for you. We make our models in a variety of materials.
Since our beginning in 1947, Hydraulic Supply Company (HSC) has been dedicated to fulfilling customers’ needs. We are a full service distributor of fluid power products and services. We carry a selection of over 20,000 hydraulic, pneumatic and industrial products in stock from the most recognized brands in the industry. Our goal is to provide customers with a large selection of hydraulic, pneumatic and industrial products with the best professional services, right when you need them.
Made-to-order & made-to-last custom hydraulic pumps faster than you can expect from other companies. The widest selection of hydraulic gear pumps & piston pumps, plus stock replacement pumps ready for immediate shipment. Brands: Webster, Danfoss, Barnes, Haldex, Cessna, Eaton, Vickers, etc. Hydraulic.Net’s specialization is in short run special application gear pumps with little tooling expense.
Hydraulics International, Inc. (HII), headquartered in Chatsworth, California, U.S.A., is a leading manufacturer and supplier of integrated products, services and support to military forces, aviation and commercial industries, government agencies and prime contractors worldwide. Focused on defense and commercial technology, HII develops manufactures and supports a broad range of products and systems for over a hundred industries as well as mission critical and military sustainment requirements worldwide. HII is also recognized as a leading manufacturer and supplier of air, electric, hydraulic, & manual driven high-pressure products to Automotive, Airline & Aerospace, Cannabis, CNG, Defense, Fire-Health & Safety, Fluid Power, Fuel Cell Hydrogen, General Manufacturing, Laboratory, University & Research, Mining, Oil & Gas, Paintball, Plastics, Power & Energy, Recreational Sports Diving, Electronics and other industries. We produce 85% of our products internally, thus eliminating our dependency upon outside sources for quality, reliability, and expediency. Because of our self-sufficiency, we are able to maintain key competitive advantages that include faster response to engineering and design problems, and reliability of components critical to functionality.
Here at Hydreco we manufacture hydraulic solutions for a number of markets including: agricultural, municipal, construction, mining and transportation. Our company has an extensive history of engineering success. If you are unsure what hydraulic products are best for your task then just let one of our representatives know your application and we can handle the rest!
Over 50 years, Hydro Leduc has developed more than 100 patents because of our passion for innovation in the hydraulics field. We find solutions to our customers’ most complex and demanding applications for piston pumps, hydraulic motors, hydro-pneumatic accumulators and custom hydraulic components.
HYTORC developed the jet series pumps which are portable, heavy duty, light weight, high flow to withstand harsh environments. These air or electric driven Hydraulic Pumps are engineered for continuous, non-stop use in harsh environments. If used on Torque Tools, Jacks, Cutters, Presses or Bending equipment, their reliability is unmatched by any other Hydraulic Power Pack.
We are a distributor of hydraulic and pneumatic products such as hydraulic pumps, filters, motors, valves and more. Our manufacturers make hydraulic gear pumps, piston pumps and hydraulic pumps with aluminum or cast iron casings. We have been in business for 30 years and service all of our products.
Founded in 1971, Interface Devices is a world-class designer and manufacturer of air driven fluid pumps, hydraulic valves and custom engineered fluid power products. IDI proudly designs and manufactures all our products at our Milford, CT facility. As we continue to grow and develop it is our principle aim to provide quality in our designs and manufacturing while responding to customer needs.
Jones Hydraulic Service is a company dedicated to solving the needs of our customers. Jones Hydraulic Service is a leading supplier / vendor too many large and small corporations, and many independent contractors. Our customer service is a top priority. Whether customers are looking to Purchase, Rent or Repair hydraulic tooling or keep their workers safe with High Visibility Apparel or Mosquito Repellent we get the job done. Jones Hydraulic Service is proud to be serving the energy, marine, petrochemical, railroad, construction, foundation repair, pipeline and shipyard industries since 1977. Jones Hydraulic represents some of the world’s leading Hydraulic Tool & Equipment manufacturers that include SPX Power Team, SafeWay Hydraulics, Pell Hydrashear, TORC LLC, Eagle Pro, and more. Offering Hydraulic Tool & Equipment Sales, Service and Repair for 40 years.
Jones Hydraulic listened to its customers needs for industrial supplies and now stocks LED Work Lights, Safety Mats, Hand Held Power Tools, LED Flood Head Lamp, Spill Clean Up Supplies, Water Dams and more. Jones Hydraulic represents the leading industrial supply companies including PowerSmith, Genesis, Spill Tackle, Quick Dams Nite Ize and more.
Jones Hydraulic helps their customer create a safe and healthy work environment by providing safety products that include Personal Protective Equipment, Hi-Vis Clothing, First Aid Supplies, Mosquito and Insect Repellents, Eye Protection and Outdoor Protective Equipment. Jones Hydraulic represents some of the leading safety product manufacturers such as SAS Safety, GSS Safety, Sawyer, Southern Glove and more.
We recently opened a Safety Equipment & Hydraulic Tool Showroom. We welcome you to stop by and see some of the latest product offerings. Our Showroom is located at 5955 Armour Drive, Houston, TX 77020. We are proud of our 40 year history and look forward to serving our customers for many more years to come.
At Linde Hydraulics, we pride ourselves on our designing/manufacturing of high pressure pumps and the Linde Hydraulic Valve. Our hydraulic pumps have been a mainstay since 1970. Our pumps are used in agriculture and defense. A complete hydraulic system can be offered, along with motors that deliver reliable performance.
Our Maximator® air-driven hydraulic pumps deliver from 60 to 60,000 PSI and cycle automatically. The Maximator® pumps are used in our hydraulic power units. We can provide you with standard or customized high pressure pump power systems. Repair and refurnishing services also available.
Since 1941, Metro Hydraulic Jack Co. has been your single source for all your hydraulic needs. We represent a wide variety of material lift and equipment manufacturers and we sell only the best. Our products are designed to help improve the safety of your work environment and increase your productivity. We are proud to provide a wide selection of high-quality hydraulic lifting products to our customers. As a third-generation family-owned business, all of us at Metro Hydraulic Jack Co. pride ourselves on delivering the same high-quality hydraulic products and top-notch customer service as we have always been. Our knowledgeable sales staff are experts at specifying the right equipment to meet our customers’ requirements and needs. Our extensive list of hydraulic lifting products includes aerial lifts , dock lifts , pallet lifts, platform lifts , rotary lifts, scissor lifts, small hydraulic lifts, and hydraulic lift systems. Additionally, we supply cylinders, pumps, valves, hydraulic and air jacks, pullers, punches, lubrication equipment, and more. The manufacturers we represent, including Autoquip, ECOA, Lift Products, Inc., and Lift-rite, are the best in the industry and we are proud to offer their products.
Our engineering services include custom hydraulic and lube system design to meet our customers’ specifications, as well as other specialized services. We are a supplier to numerous industries, including automotive, construction, industrial, material handling, mobile, and railroad. You can find an impressive list of our customers on our website. Call or email us today to learn how we can service your hydraulic needs.
Our Hydraulics Division, headquartered in Greenwood Indiana, is a world-class manufacturer of pumps, valves, flow controls, hydraulic power units and other products. We are known not only for our product excellence but for our competitive pricing and the ready availability of our products when customers need them.
Sales, service and rental for all major brands of hydraulic pumps and other air, electric and hydraulic equipment. Hydraulic pump offerings include hand pumps, air pumps, electric pumps, gas pumps and intensifiers. Highly skilled at matching tool to application for hydraulic pumps and more.
Oilgear heavy-duty axial piston hydraulic pumps are built. Engineered with Oilgear’s advanced “hard-on-hard” rotating group and hydrodynamic bearing support on the cylinder barrel, our pumps provide longer operational life and optimal resistance to contamination. Available in a variety of frame sizes and control options, Oilgear offers just the right pump to fit your demanding needs.
Founded nearly 25 years ago, Panagon Systems has remained a trusted company producing hydraulic parts on demand for a number of shops, manufacturers and industries. The company, located in Macomb, Michigan, is the largest aftermarket hydraulic piston pump and parts manufacturer in North America, providing a vast variety of current and obsolete components. Panagon has the ability to produce a product from raw materials to a finished pump, assembled, tested, painted and shipped from our facility. Due to the phasing out of old products, customers usually find that the parts they need are no longer available, or that the delivery time is too long or the cost is too high. Panagon Systems attempts to fill the void OEM’s create by manufacturing the phased out, expensive, unavailable pumps, motors and transmissions, from companies like Vickers, Denison and Rexroth.
We manufacture hydraulic pumps, motors and parts for a variety of industrial and mobile applications. Our replacements are equivalent to the Eaton/Vickers line of PVH, PVQ, PVB, PVM, PVE, PFB, MFB, MFE, TA19, TA1919, TDV10 and TDV20 series units and Rexroth A10V series units.
In addition to supplying complete replacement piston pumps, Panagon also offers all replacement parts for all series units such as Rotating Groups, Shafts, Compensators, Yokes, Valve Blocks, Housings, Bearings, Seal Kits, Cylinder Blocks, Shoe Plates, Swash Plates, Piston Kits, Wafer Plates, Control Pistons, Control Rods, Bias Pistons, Bias Rods, Spacer Kits, Saddle Bearings, and more.
Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs.
The Parker Pump & Motor Division specializes in gear pumps and motors used in a myriad of industries. With decades of experience, PMD provides the best products in the market, supplemented by best-in-class customer service, and the deepest knowledge in the industry.
Perfection Hydraulics manufactures, distributes, and services hydraulic cylinders, hydraulic pumps, hydraulic valves, hydraulic gear pumps, and other hydraulic components for heavy equipment. Our products provide you with the best value available for today’s dynamic industry. With our reputation for quality and reliability, you can rely on us for your heavy duty hydraulics needs.
Pierce Sales is a manufacturer and distributor of 12-volt hydraulic pumps, hydraulic hoses, hydraulic fittings, tie-rod cylinders and many more products. We offer professional installation services. We also have spare parts and provide repair services to get your equipment running as soon as possible.
Precision Fluid Power is a distributor of hydraulic pumps, including hydraulic vane pumps, hydraulic piston pumps and hydraulic gear pumps. We provide new hydraulic motors or we rebuild them, as well as hydraulic valves and hydraulic cylinders. We also offer hydraulic pump repair. Call us today.
Robeck Fluid Power is a leading manufacturer of hydraulic pumps and an assortment of lubrication equipment. Our products include aluminum structural framing, automation equipment, electronics, fluid conveyance equipment, hydraulic pumps, lubrication systems, and pneumatic products. We are a fully authorized distributor of Eaton, Charlynn, Hydro-line, Aeroquip, and Vickers products. Visit our website to learn more about our manufacturers or to speak with a sales representative.
Since 1978, we have been offering hydraulic pumps, motors, valves and cylinders with 100 years combined experience. We distribute hydraulic systems, and also do on-site machine shop repair services and rebuilding. Our quality hydraulic power units can be ordered around the clock for your convenience.
SC Hydraulic Engineering has been a leader in the design & manufacture of various air-powered hydraulic pumps, hydraulic piston pumps, hydraulic power units and systems plus hydraulic valves—relief, inline check, high pressure. We also have the ability to customize our products to fit your needs. In business since 1953, we work worldwide through distributors and manufacturers.
Since 1899, SIMPLEX products have been used by industries that need hydraulic and mechanical equipment and solutions. Our continuous duty hydraulic pumps are equipped for up to 5HP, as are our gas, air & electric hydraulic pumps for heavy-duty tooling applications. Our positioning and lifting products turn challenges into progress.
Established in 1979, Southwest Seal and Supply has grown to become one of the most predominant distributors of sealing, hydraulic hoses, fittings, couplings/connectors, gasketing and fluid control products in the Southwest. We offer a wide range of products including the best in selection, quality, and value-added services.
POWER TEAM is a world leader in hydraulic special service tools and equipment for motor vehicle and industrial markets, manufacturingprecision quality high-pressure hydraulic products, which include pumps,cylinders, valves, clamping components, related hydraulic accessoriesand special tools and equipment.
Stone Hydraulic Systems manufactures AC and DC hydraulic power units for a broad range of OEM applications such as auto hoists, dock levelers, hose crimpers, lift tables and compactors to name a few. Stone"s products provide a wide power range up to 5.5 horsepower.
SRS Crisafulli hydraulic-powered pumps handle industrial-strength pumping jobs: trash, mud, waste, raw sewage, sludge. Discharge sizes 2" to 24" and flows to 18,000 GPM. Standard Power Unit models in electric, diesel or gas, 32 to 180 horsepower, outputs from 18 to 119 GPM or custom built to your spec.
Sunfab was founded by Eric Sundin in the year of 1925. Sunfab develops, produces and sells components to operate hydraulic equipment within the area of mobile vehicles. After more than 90 years, the third generation of the Sundins are still running the company in the spirit of Eric Sundin, with a family atmosphere, flexibility and innovative solutions.
TK Trailer Parts is a dedicated manufacturer of high quality products. We are a turnkey supplier of hydraulic cylinders, hydraulic pumps, hydraulic valves, and much more. If you need assistance with find the right solution for you then feel free to reach out to one of our representatives.
Serving customers worldwide since 1911 with our innovative positive displacement pumping solutions, including custom designs. For even the toughest industrial, OEM & sanitary applications, we manufacture Vane Pumps, Internal & External Gear Pumps & more.
Willman Industries is a large, independent, jobbing foundry, located in Cedar Grove, Wisconsin. We produce all types of gray iron and ductile iron components, ranging from ounces to 40,000 lbs. Thin-walled exhaust manifolds, heavy-section hydraulic pumps, valves, housings, flywheels, clutch plates, machine tools, power generating equipment are typical of our product mix.
Zinko Hydraulic Jack is a leading manufacturer of high-quality hydraulic products. In addition to our namesake hydraulic jacks, we provide scissor jacks and aluminum jacks as well as hydraulic cylinders, lifts and other material handling equipment. At Zinko, your needs are met with a diverse inventory of quality hydraulic pumps including air pumps, hand pumps, electric hydraulic pumps and more.
Hydraulic pumps (sometimes erroneously referred to as "hydrolic" pumps) are devices within hydraulic systems that transport hydraulic liquids from one point to another to initiate the creation of hydraulic power. They are an important component overall in the field of hydraulics, a specialized form of power transmission that harnesses the energy transmitted by moving liquids under pressure and converts it into mechanical energy. Other types of pumps that are used to transmit hydraulic fluids may also be called hydraulic pumps. Because of the wide variety of contexts in which hydraulic systems are employed, hydraulic pumps are very important in various industrial, commercial and consumer utilities.
The term power transmission refers to the overall process of technologically converting energy into a useful form for practical applications. Three main branches compose the field of power transmission: electrical power, mechanical power, and fluid power. Fluid power encompasses the use of moving gases and well as moving liquids for power transmission. Hydraulics, then, can be considered as a sub-branch of fluid power which focuses on liquid usage as opposed to gas usage. The other field of fluid power is known as pneumatics and revolves around storing and releasing energy with compressed gas.
As described above, the incompressible nature of fluid within hydraulic systems enables an operator to create and apply mechanical power in a very efficient manner. Practically all of the force generated within a hydraulic system is applied to its intended target.
Because of the relationship between force, area, and pressure (F = P x A), it is relatively easy to modify the force of a hydraulic system simply by modifying the size of its components.
Hydraulic systems can transmit power on par with many electrical and mechanical systems while being generally simpler at the same time. For example, it is easy to directly create linear motion with a hydraulic system. On the contrary, electrical and mechanical power systems generally require an intermediate mechanical step to produce linear motion from rotational motion.
Hydraulic power systems are generally smaller than their electrical and mechanical counterparts while generating similar amounts of power, thus providing the advantage of conserving physical space.
The basic design of hydraulic systems (a reservoir/pump connected to actuators by some sort of piping system) allows them to be used in a wide variety of physical settings. Hydraulic systems can also be used in environments that are impractical for electrical systems (e.g. underwater).
Using hydraulic systems in place of electrical power transmission increases relative safety by eliminating electrical safety hazards (e.g. explosions, electric shock).
A major, specific advantage of hydraulic pumps is the amount of power they are able to generate. In some cases, a hydraulic pump can produce ten times the amount of power produced by an electrical counterpart. Some types of hydraulic pumps (e.g. piston pumps) are more expensive than the average hydraulic component. These types of disadvantages, however, may be offset by the pump’s power and efficiency. For example, piston pumps are prized for their durability and ability to transmit very viscous fluids, despite their relatively high cost.
The essence of hydraulics lies in a fundamental physical reality: liquids are incompressible. Because of this, liquids resemble solids more than compressible gases. The incompressible nature of liquid enables it to transmit force very efficiently in terms of force and speed. This fact is summarized by a version of "Pascal’s Law" or "Pascal’s Principle", which states that virtually all of the pressure applied to any part of a (confined) fluid will be transmitted to every other part of the fluid. Using alternative terms, this scientific principle states that pressure exerted on a (confined) fluid transmits equally in every direction.
Furthermore, force transmitted within a fluid has the potential to multiply during its transmission. From a slightly more abstract point of view, the incompressible nature of liquids means that pressurized liquids must maintain a constant pressure even as they move. Pressure, from a mathematical point of view, is force acting per a specific area unit (P = F/A). A rearranged version of this equation makes it clear that force equals the product of pressure times area (F = P x A). Thus, by modifying the size or area of certain components within a hydraulic system, the force acting within a hydraulic system can also be modified accordingly (to either greater or lesser). The need for pressure to stay constant is responsible for making force and area reflect each other (in terms of either growing or shrinking). This force-area relationship can be illustrated by a hydraulic system containing a piston that is five times bigger than a second piston. if a certain force (e.g. 50 pounds) is applied to the smaller piston, that force will be multiplied by five (e.g. to 250 pounds) as it is transmitted to the larger piston within the hydraulic system.
The chemical nature of liquids as well as the physical relationship between force, area, and pressure form the foundation of hydraulics. Overall, hydraulic applications enable human operators to create and apply massive mechanical forces without exerting much physical effort at all. Water and oil are both used for power transmission within hydraulic systems. The use of oil, however, is far more common, due in part to its very incompressible nature.
It has previously been noted that "Pascal’s Law" applies to confined liquids. Thus, for liquids to act in a hydraulic fashion, it must function with some type of enclosed system. An enclosed mechanical system that uses liquid hydraulically is known as a hydraulic power pack or a hydraulic power unit. Though specific operating systems are variable, all hydraulic power packs (or units) have the same basic components. These components generally include a reservoir, a pump, a piping/tubing system, valves, and actuators (including both cylinders and motors). Similarly, despite the versatility and adaptability of these mechanisms, these components all work together within similar operating processes, which lie behind all hydraulic power packs.
Hoses or tubes are needed to transport the viscous liquids transmitted from the pump. This piping apparatus then transports the solution to the hydraulic cylinder.
Actuators are hydraulic components which perform the main conversion of hydraulic energy into mechanical energy. Actuators are mainly represented by hydraulic cylinders and hydraulic motors. The main difference between hydraulic cylinders and hydraulic motors lies in the fact that hydraulic cylinders primarily produce linear mechanical motion while hydraulic motors primarily produce rotary mechanical motion.
Hydraulic systems possess various valves to regulate the flow of liquid within a hydraulic system. Directional control valves are used to modify the size and direction of hydraulic fluid flow, while pressure relief valves preempt excessive pressure by limiting the output of the actuators and redirecting fluid back to the reservoir if necessary.
Two main categories of hydraulic pumps to be considered are piston pumps and gear pumps. Within the piston grouping are axial and radial piston pumps. Axial pumps provide linear motion, while radial pumps can operate in a rotary manner. The gear pump category is also divided into two groupings, internal gear pumps and external gear pumps.
No matter piston or gear, each type of hydraulic pump can be either a single-action or double-action pump. Single-action pumps can push, pull or lift in only one direction, while double-action pumps are multidirectional.
The transfer of energy from hydraulic to mechanical is the end goal, with the pump mechanism serving as a generator. In other cases, however, the energy is expelled by means of high pressure streams that help to push, pull and lift heavy loads.
Hydraulic piston pumps and hydraulic clutch pumps, which operate in slightly different ways, are all utilized in heavy machinery for their versatility of motion and directionality.
And hydraulic water pumps are widely used to transfer water. The design of these pumps dictates that, although a small amount of external energy is needed to initiate the action, the weight of the water and its movement can create enough pressure to operate the pump continuously thereafter. Hydraulic ram pumps require virtually no maintenance, as they have only two moving parts. Water from an elevated water source enters one of two chambers through a relatively long, thick pipe, developing inertia as it moves down to the second chamber, which starts the pump.
The initial energy within a hydraulic system is produced in many ways. The simplest form is the hydraulic hand pump which requires a person to manually pressurize the hydraulic fluid. Hydraulic hand pumps are manually operated to pressurize a hydraulic system. Hydraulic hand pumps are often used to calibrate instruments.
Energy-saving pumps that are operated by a compressed air source and require no energy to maintain system pressure. In both the single and two-stage air hydraulic pumps, air pressure is simply converted to hydraulic pressure, and they stall when enough pressure is developed.
Non-positive displacement pumps that are used in hydraulics requiring a large volume of flow. Centrifugal pumps operate at fairly low pressures and are either diffuser or volute types.
Convert hydraulic energy to mechanical power. Hydraulic pumps are specially designed mechanisms used in industrial, commercial and residential settings to create useful energy from the pressurization of various viscous fluids. Hydraulic pumps are extremely simple yet effective mechanisms for moving liquids. "Hydralic" is actually a misspelling of "hydraulic;" hydraulic pumps rely on the power provided by hydraulic cylinders to power various machines and mechanisms.
Pumps in which the clamps and cylinders are quickly extended by high flow at low pressure in the first stage of operation. In the second stage, piston pumps build pressure to a preset level and then maintain that level.
The construction, automotive manufacturing, excavation, agriculture, defense contracting and manufacturing industries are just a few examples of operations that utilize the power of hydraulics in normal, daily processes. Since the use of hydraulics is so widespread, hydraulic pumps are naturally used in a broad array of industries and machines. In all of the contexts which use hydraulic machinery, pumps perform the same basic role of transmitting hydraulic fluid from one place to another to create hydraulic pressure and energy (in conjunction with the actuators).
Various products that use hydraulics include elevators, automotive lifts, automotive brakes, airplane flaps, cranes, shock absorbers, motorboat steering systems, garage jacks, log splitters, etc. Construction sites represent the most common application of hydraulics in large hydraulic machines and various forms of "off-highway" equipment such as diggers, dumpers, excavators, etc. In other environments such as factories and offshore work areas, hydraulic systems are used to power heavy machinery, move heavy equipment, cut and bend material, etc.
While hydraulic power transmission is extremely useful in a wide variety of professional applications, it is generally unwise to depend exclusively on one form of power transmission. On the contrary, combining different forms of power transmission (hydraulic, pneumatic, electrical and mechanical) is the most efficient strategy. Thus, hydraulic systems should be carefully integrated into an overall strategy of power transmission for your specific commercial application. You should invest in finding honest and skilled hydraulic manufacturers / suppliers who can assist you in developing and implementing an overall hydraulic strategy.
When selecting a hydraulic pump, its intended use should be considered when selecting a particular type. This is important since some pumps may carry out only one task, while others allow more flexibility.
The material composition of the pump should also be considered in an application-specific context. The pistons, gears and cylinders are often made of durable materials such as aluminum, steel or stainless steel which can endure the constant wear of repetitive pumping. The materials must hold up not only to the process itself, but to the hydraulic fluids as well. Oils, esters, butanol, polyalkylene glycols and corrosion inhibitors are often included in composite fluids (though simply water is also used in some instances). These fluids vary in terms of viscosity, operating temperature and flash point.
Along with material considerations, manufacturers should compare operating specifications of hydraulic pumps to ensure that intended use does not exceed pump capabilities. Continuous operating pressure, maximum operating pressure, operating speed, horsepower, power source, maximum fluid flow and pump weight are just a few of the many variables in hydraulic pump functionality. Standard measurements such as diameter, length and rod extension should also be compared. As hydraulic pumps are used in motors, cranes, lifts and other heavy machinery, it is integral that they meet operating standards.
It is important to remember that the overall power produced by any hydraulic drive system is affected by various inefficiencies that must be taken into account to get the maximum use out of the system. For example, the presence of air bubbles within a hydraulic drive is notorious for diverting the energy flow within the system (since energy gets wasted en route to the actuators on compressing the bubbles). Using a hydraulic drive system must involve identifying these types of inefficiencies and selecting the best components to mitigate their effects. A hydraulic pump can be considered as the "generator" side of a hydraulic system which begins the hydraulic process (as opposed to the "actuator" side which completes the hydraulic process). Despite their differences, all hydraulic pumps are somehow responsible for displacing fluid volume and bringing it from the reservoir to the actuator(s) via the tubing system. Pumps are generally enabled to do this by some type of internal combustion system.
Even though hydraulic systems are simpler when compared to electrical or mechanical systems, they are still sophisticated systems that should only be handled with care. A fundamental safety precaution when interacting with hydraulic systems is to avoid physical contact if possible. Active fluid pressure within a hydraulic system can pose a hazard even if a hydraulic machine is not actively operating.
Insufficient pumps can lead to mechanical failure in the workplace, which can have serious and costly repercussions. Although pump failure has been unpredictable in the past, new diagnostic technologies continue to improve on detection methods that previously relied upon vibration signals alone. Measuring discharge pressures allows manufacturers to more accurately predict pump wear. Discharge sensors can be easily integrated into existing systems, adding to the safety and versatility of the hydraulic pump.
A container that stores fluid under pressure and is utilized as a source of energy or to absorb hydraulic shock. Accumulator types include piston, bladder and diaphragm.
A circumstance that occurs in pumps when existing space is not filled by available fluid. Cavitation will deteriorate the hydraulic oil and cause erosion of the inlet metal.
Any device used to convert potential energy into kinetic energy within a hydraulic system. Motors and manual energy are both sources of power in hydraulic power units.
A slippery and viscous liquid that is not miscible with water. Oil is often used in conjunction with hydraulic systems because it cannot be compressed.
A device used for converting hydraulic power to mechanical energy. In hydraulic pumps, the piston is responsible for pushing down and pulling up the ram.
A hydraulic mechanism that uses the kinetic energy of a flowing liquid to force a small amount of the liquid to a reservoir contained at a higher level.
A device used to regulate the amount of hydraulic or air flow. In the closed position, there is zero flow, but when the valve is fully open, flow is unrestricted.
Impeller blades revolve inside the casing, rotating the surround fluids. the blades also lubricate and cool the system. Pump bearings are often made to anti-friction, to help the impeller rotate inside the casing. The pump shaft is made of steel, and its size corresponds to the size of the impeller.
A hydraulic hand pump transforms human power into hydraulic energy by combining pressure and flow. The foundation for hydraulic fluid delivery is the simple notion that a handle gives an internal piston leverage under manual pressure. The piston then pushes the hydraulic fluid into the cylinder port. Water and hydraulic fluid are the two most common fluids, and however other pressure media can also be used.
The hydraulic pressure generated can be used to test, calibrate, and adjust various measuring instruments and tools. Hydraulic hand pumps are widely used to load and test mechanical parts when a user requires precise adjustments. They are also used in lifting and lowering heavy things in material handling equipment, which similarly necessitates precise control over the movement of the objects.
The working medium, requisite pressure range, drive type, etc., are only a few of the functional and hydraulic system requirements that are considered when manufacturing hydraulic pumps. In addition, there are numerous design philosophies and hydraulic pump combinations to choose from. Due to this, only a few pumps can completely fulfill all needs. The most common types of hydraulic pumps have already been described.
The use of hydraulic pumps is still common in industrial settings. Elevators, conveyors, mixers, forklifts, pallet jacks, injection molding machines, presses (shear, stamping, bending, etc.), foundries, steel mills, and slitters are examples of equipment used in material handling. With an application"s need, a hydraulic pump is more likely to be used.
Additionally, hydraulic pumps are used in every conceivable mobile or industrial hydraulic machine. They are used on many different pieces of gear, such as excavators, cranes, loaders, tractors, vacuum trucks, forestry equipment, graders, dump trucks, and mining equipment. Mobile applications use hydraulic pumps more commonly than industrial applications since industrial devices typically don"t use electric actuators.
Since 1935, Muncie® Power Products has been a leading source of mobile power components to the truck equipment industry. In addition to Power Take-Offs and hydraulic motors, Muncie offers directional, pressure and flow control valves as well as system design capabilities. Call us today or visit our website for more information.
Hartmann Controls offers some of the most dependable hydraulic motors for industrial and mobile applications. Exceeding the capabilities of most other hydraulic motors, our products offer simplicity and precision for exact operations. Our superior motors can go for decades. Check out our catalog today! Our products are used by the world’s largest manufacturers and companies. Contact our company!
Planet Products Corp. is a contract manufacturer and manufacturer of various hydraulic products. Hydraulic products include motors, valves, and pumps. Planet serves mainly the defense, aerospace, machine tool, and industrial sectors and is ISO9001/AS9100 certified.
Precision Fluid Power sells new & rebuilt hydraulic motors. We also specialize in the repair of hydraulic components such as hydraulic motors, pumps, valves & cylinders. All units received for repair will be completely stripped down, cleaned and inspected, & any bad parts will be replaced. With over 150 years of experience we serve all industries, large or small. Please contact our company today!
For 40 years, Bucher Hydraulics, Inc. has specialized in hydraulic systems, including products such as hydraulic motors and hydraulic power units. Applications include concrete pumps, forage wagons, harvesters, lifting devices, recycling machines, door openers, log splitters and many others.
Danfoss has 45 years of experience offering hydraulic motor solutions. We supply hydraulic power systems for moderate to heavy load demands. Our orbital motors have speeds extending from 2,500 rpm to 600 rpm. We also have hydraulic motors that vary in size from mini to medium to large.
Established in 1966, Delta Power designs and manufactures industrial hydraulic cartridge valves and manifold systems using these valves. We also produce hydraulic motors and hydraulic power units. Contact us for cutting-edge hydraulic system designs and products.
For more than four decades, Dynex/Rivett has been manufacturing hydraulic power systems and components. Our products include hydraulic motors, hydraulic power units and variable speed motors. We serve the worldwide market with our top-quality motors and hydraulic systems.
Eaton Hydraulics designs, manufactures and markets a comprehensive line of reliable, efficient hydraulic systems and components including hydraulic motors, hydraulic power units and other hydraulic systems. We serve various markets and applications with our quality systems and accessories.
Flint Hydraulics, Inc. is dedicated to the worldwide distribution of original and replacement hydraulic pumps, hydraulic motors, and hydraulic pump replacement parts for heavy mobile and industrial equipment. We maintain a database of more than 30,000 hydraulic pumps, motors and parts by OEM part number for name brands of heavy mobile equipment such as Caterpillar, J.I. Case, John Deere, Clark-Michigan, Terex, Grove, Komatsu-Dresser, Bobcat and many more. Located in the heart of America’s distribution center, Flint Hydraulics, Inc. has grown into one of the largest suppliers of original and replacement hydraulic products in the world. Off-the-shelf availability, coupled with the distribution center advantages Memphis has to offer, give us the unique ability to provide hydraulic components across the globe, using the most efficient and economical means available. We stock substantial quantities of pumps, motors, parts and assemblies and can ship at a moment’s notice anywhere in the world. Most items are available for same or next day shipment.
Our production facility is uniquely designed for assembly and testing of various types and designs of hydraulic pumps & motors to meet the just-in-time inventory requirements of our clients. Our professionally trained staff is the most knowledgeable and schooled customer service team in the entire industry. Equipped with the latest distribution software and our own custom-tailored cross-referencing databases, our staff is able to provide instant information regarding the particular hydraulic component your client needs.
Fluidyne Fluid Power is a leading industrial power distributor and manufacturing facility specializing in hydraulic motors, components and custom-designed fluid power systems. We have an extensive product line able to provide exactly what you need. They combine fluid power expertise with a vast selection of world-class components to provide you with unsurpassed system efficiency.
Haldex is a global provider of vehicle solutions, including hydraulic pump motors, hydraulic power units, gear pumps and fan drive pumps as well as AC/DC motors. Reduce emissions and innovative diesel engines with Haldex excellent solutions and customer service. We base our decisions and actions on the customer’s best interests. Contact us today!
An employee-owned company, Hydraquip is a distributor of fluid power products, including hydraulic motors from Hydro-Gear, Hydrokraft, Rineer Hydraulics, Rotary Power, Sauer Danfoss, Ultra, Vickers and Von Ruden. Since 1951, we have been serving the fluid power industry.
Need an old cylinder swapped or remanufactured? Need telescopic cylinders, replacement cylinders or hydraulic cylinders for large industrial equipment? At Hydraulic Repair & Design, we can supply all industries with new, custom or repaired cylinders, experienced design & friendly customer service!
Hydreco® Inc. offers a wide range of hydraulic gear motors as well as hydraulic pumps and valves. We offer drive axles, gearboxes, hydraulic pumps, gear pumps and piston pumps. Contact us today for more information on our quality products.
Over 50 years, Hydro Leduc has developed more than 100 patents because of our passion for innovation in the hydraulics field. We find solutions to our customers’ most complex and demanding applications for piston pumps, hydraulic motors, hydro-pneumatic accumulators and custom hydraulic components. A complete list of available motors and features can be found on our website. Contact a representative today for any further inquiries!
Since1967, Hydrotech has provided industries with innovative solutions for their fluid power needs. Our listing of hydraulic motors are manufactured by Bosch Rexroth, Rineer Hydraulics and White Drive Hydraulics. For more information call our experienced team of technicians and sales support!
Founded 40 years ago, Innerspace designs, develops and manufactures top-quality, efficient propulsion systems for marine vehicles. Our product capabilities include hydraulic products such as hydraulic motors and customized hydr