parker hydraulic pump rotation direction supplier

Gear pumps have an input shaft that drives an inner gear or “drive” gear. When the shaft turns the drive gear, the drive gear turns the “driven” gear. As these two gears rotate, oil is pulled into the suction port, split and carried around the perimeter of the gears, and finally, combined and pushed out the discharge port.

When determining the rotation of a gear pump, one must decide on the viewing orientation. As an industry standard a pump’s rotation is determined when viewed looking at the input shaft. If your viewing orientation is at the rear of the pump, the technical rotation of the pump is opposite the visual rotation.

The suction and discharge ports are determined by the rotation of the input shaft. As with rotation, the position of each port is dependent upon the viewing orientation. Here to, the industry standard, when looking at the input shaft, is for the drive gear to be oriented above the driven gear, also known as “belly down”. In this orientation, a clockwise pump will have suction on the left and discharge on the right and vice versa. If the pump is oriented with the “belly up”, the suction and discharge ports will appear opposite.

We carry major manufacturers like Allen-Bradley, Allison Transmission, Autocar Truck, Bendix, Braden Carco Gearmatic, Caterpillar, Clark, Clark Michigan, Cummins Engine, Dana-Off Highway, Dana Spicer Heavy Axle, David Brown, Deutz Diesel, Detroit Diesel, Eaton, Eaton-Fuller, Eaton-Vickers, Fiat Allis, FWD, Gates, Hitachi, Horton, Hyundai Construction Equipment, Ingersoll-Rand Pneumatic Tool, John Deere Construction & Forestry, Koehring Cranes & Excavators, Komatsu America, Komatsu America-Wabco, Kubota Engine, Meritor, Meritor Wabco, Parker, Perkins, Rexroth GMBH, Robert Bosch, Red Dot, SKF Bearings, Timken, ZF Parts and hundreds of others.

We cover a broad range of categories including Hydraulics, Engines, Transmissions, Gears, Hose and Fittings, Pumps, Valves, Cylinders, Shock Absorbers, Brakes, Axles, Bearings, Filters, Electric Motors, Gauges, Forklift Parts and many more. We serve repair facilities, maintenance departments, owner-operators, manufacturers, distributors and resellers. Basically, anyone who needs parts. Our website is searchable by part number, manufacturer, description and other key words.

For hydraulic pump installation or when replacing a hydraulic pump or motor, it is essential that all critical parameters are taken into account. Be sure you know the required system, pressure, RPM range, direction of rotation, shaft size and type, port size and type, and mounting information. If you have nay questions regarding replacing pumps, don’t hesitate to call our component group at 1-800-728-5168.

In many cases, OEM’s have used pumps from several different manufacturers for the same model of equipment and are, for all practical purposes, identical.

Using the above information, our trained personnel will select the proper replacement pump. Some pumps, however, have been out of production for a number of years and certain modifications may have to be made

This page is the page of Parker Hydraulic Gear Pump, 8cm³ sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 1.5 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.

It is the central task of external gear pumps to convert mechanical energy (torque and speed) into hydraulic energy (flow and pressure). To reduce heat losses, Rexroth’s external gear units offer very high efficiencies. They are realized by pressure-dependent gap sealing and highly precise production technology.

Rexroth external gear pumps are built in four frame sizes: Platform B, F, N and G. Within each platform different displacements can be realized by different gear widths. The pumps are available in the versions Standard, High-Performance, SILENCE und SILENCE PLUS. Further configuration variants are given by different flanges, shafts, valve arrangements and multiple pump combinations.

The drive shaft protrudes from the front cover where it is usually sealed by the shaft seal ring. The bearing forces are absorbed by slide bearings. These are designed for high pressures and have excellent dry-running qualities, especially at low rotational speeds. The gear wheels have 12 teeth. This keeps both flow pulsation and noise emission to a minimum.

In order to reduce piping complexity, a flow control valve or pressure-relief valve can be integrated in the cover of the gear pump. Such solutions are used, for instance, for the hydraulic oil supply of power steering systems. The pump delivers a constant flow irrespective of the rotational speed. The residual flow is either returned internally to the suction port or distributed externally to other consumers.

PGH-type hydraulic pumps are gap-compensated internal gear pumps with fixed displacement. The hydrodynamically mounted pinion shaft drives the internal gear. The pinion shaft and internal gear tooth clearances opening in the suction range suck in the hydraulic fluid and transport it to the pressure range. The suction and pressure range are separated by the radial compensation elements and the tooth engagement between the internal gear and pinion shaft.

HEASH TECH’s supply is equal to your demand. Rexroth original and new external gear pump AZPB, AZPF, AZPN, AZPG, AZPS, AZPT, AZPU, AZPJ, Rexroth 0510 gear pump, 0518 gear pump, 0511 gear motor and Rexroth Internal gear pumps PGF, PGH-2X, PGH-3X, PGH-4X, PGM-4X.

The displacement of a pump is defined by the volume of fluid that the gears, vanes or pistons will pump in one rotation. If a pump has a capacity of 30 cm3, it should treat 30 ml of fluid in one rotation.

... designed for open circuits in mobile hydraulics and operate according to the swash plate principle. They are available with the option of a thru-shaft for operating additional hydraulic pumps ...

PGP 500 pumps offer superior performance, high efficiency and low noise operation at high operating pressures. They are produced in four frame sizes (PGP 502, PGP 505,PGP 511, PGP 517) with displacements ...

... Parker’s hydraulic truck pump series F1 featuring high self-priming speed and high efficiency and is one of the leading truck pumps in the market. The F1 pump provide ...

... Piston Pumps provide fixed-displacement power in a unique miniature design. Engineered for open-circuit systems, they bring flexibility to your operation. Compact ...

... machinery or in hydrostatic transmissions. Fixed displacement motors can also be used in open circuit applications, and are therefore suitable for a variety of hydraulic circuits.

... and very compact for easier and inexpensive installations. Bent Axis pumps-motors will mount directly to virtually any Bezares PTO in our extensive line.

... line of fixed displacement bent axis piston pumps were developed with spherical head pistons. This provides extremely high performance and high pressure ratings on a long life span unit. ...

With their unique design, PA-PAC pumps offer a robust and durable solution to the high pressure needs of truck applications. Combining the automatic dual direction of rotation, high operating pressure (up to 500 bar peak), ...

... bidirectional pumps require no user intervention to change the direction of rotation (simple switching of the inlet fitting). Available in displacements from 12 to 130 cc/rev, HYDRO LEDUC offers the most ...

Of the same design as the XPi pumps, the XAi fixed displacement pumps are with SAE flange and shaft and are available in displacements from 18 to 63 ...

... 1000bar. The HP-REMOTE pump, like all the HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. ...

... HP-LEVER pump of the HP Series is a single-acting air-hydraulic pump with manual operation with an ergonomic lever. It has an oil flow rate of 2.4 to 0.1 l / min and operating pressures ...

The UPM-2V air-hydraulic pump is a double-acting pump with double 4/3 lever distributor hand valve, 4 hydraulic outputs, pressure gauge and pressure reducing valves included. ...

... of light weight casing piston pumps with a fixed displacement for demanding mobile hydraulics. SAP 012-108 DIN covers the displacement range 12-108 ...