pedal powered hydraulic pump in stock

Star FP series pumps have built-in reservoirs. Foot operated FP series pumps have pedal type pressure release valves that free the operator"s hands while the pump pressure is being released.

Maximum pressure of the foot pump is 5000 PSI. The adjustable overload will be set at the maximum pressure at the factory unless a lower pressure is specified by the customer. The overload can be adjusted by the customer in the field, if required.Maximum pressure 5000 PSI

This double-acting electric oil pump is a hydraulic component that supplies pressurized liquid to a hydraulic transmission. Its function is to convert the mechanical energy of a power machine (such as an electric motor and an internal combustion engine) into the pressure energy of a liquid.

This hydraulic pump unit uses 750W power pure copper motor with aluminum shell, saving power and effort, freeing your hands. 1400 revolutions per minute, fast speed and high work efficiency.

This electric hydraulic cylinder can store 7L of oil, 15 - 46 hydraulic oil. Large capacity extends working hours. Observe the hydraulic cylinder at any time through a visible window to inlet the oil in time.

A precise pressure gauge is accurate. This 10000 psi hydraulic pump is higher than most products at the market. High pressure is for driving piston and low pressure is for piston reset.

Turn on the power. Then, control the input and output of the hydraulic oil by operating the pedal solenoid valve, electric hydraulic valve. Foot switch for hands-free remote control.

If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly.

Look instead at bicycles and you soon understand the massive, explosive power harboured in our legs. The average fit person can generate 100 to 200 watts for 30 minutes without great exertion using their legs to pedal their bike. At his limit, Chris Hoy might be generating 400 watts consistently during a 60-minute period or peak at 1500 watts during a sprint. Putting this into context, a decent DeWalt or Makita battery hand drill (which seems to us to be pretty cutting edge compact portable power) will kick out around 350 watts. So, you can get a feel for what energy is available to run the AC hydraulic catamarans and what uplift Emirates Team New Zealand might expect from leg power. We have not studied how long the lads are pedalling for, but four people pedalling intensely for 30 seconds might well be kicking out upwards of 4kW or over five horsepower in old money.

Pedal power was used in a massive range of machines before electric motors — think of spinning wheels, lathes, threshers and no end of other machinery. For many, that was the only available power for the cottage industry and the big plus was that using feet to generate power left hands to do the production job. Other than water pumps, these were purely mechanical devices rather than hydraulic drives.

What other pedal powered hydraulics can we see in the modern world, away from the America’s Cup foiling machines? Well, entrenched are pedal powered hydraulic chairs for hairdressers and pedal lift hospital beds and day surgery trolleys. Here, depressing the pedal will pump up and lifting the foot pedal will allow the single acting cylinder to lower. You might incorporate a pressure-compensated flow control valve so that the unit does not come crashing down with a heavy customer or patient. Sarum has made a slick pedal-operated pump for years for a large UK medical manufacturer.

And that is pretty well the limit of enquiries to Sarum over 30 years for pedal-powered hydraulics. Why? We don’t really know. Maybe if “stuff” happens up at hand level, people don’t like a foot pump on the ground. Where there isn’t electricity, there seems to be quite an interest in pedal-powered washing machines and water pumps for domestic use and all manner of pedal machinery for third world agriculture. Those cocoa beans used to make expensive, artisan chocolate may have been ground on a pedal-powered grinder. Making your pedal-powered machine into a hydraulic machine adds complexity but can add a whole new dimension (and power) for doing jobs. High-pressure pumps, massive forces and storing hydraulic energy to give very high loads during part of a cycle are potential big wins.

– Foot-powered hydraulic waste compactors for domestic use. Could compacting waste at source dramatically cut the volume of landfill and the number of truckloads for recycling? Sprawling landfill sites are a challenge all around the world

– Foot hydraulic hard disk crushers. We don’t know how many hundred million hard disc drives there are kicking around in the world, but we would be happier to destroy our own locally. That is the sure way to be certain that the data has been destroyed.

Contact the experts to discuss your hand or foot hydraulics application. Telephone Sarum Hydraulics on 0044 1722 328388 or e-mail us on pumpsales@sarum-hydraulics.co.uk

There is remarkably little on the web on America’s Cup hydraulics, probably because of “secrets.” This article is good. http://www.sailingworld.com/tech-behind-americas-cup

Our Big Rig is designed for off-grid applications and features a work surface, ergonomic seat for comfort, quick adjustments for different riders, a flywheel to smooth pedaling, a wide range of gearing, and an all-steel, hand-built frame. An average adult can use it to generate 100 watts of electricity, pump 5 gallons of water per minute, grind a variety of grains, as well as operate an air compressor, a hydraulic pump, most any hand-cranked machine, and a variety of small shop tools. It has been found to be particularly suitable for small scale agricultural applications such as cracking grains, churning butter, and pumping water.

The Pedal Genny was developed as a more portable, single function machine. It has an optional seat, but no work surface. It features a flywheel to smooth pedaling, full-size cranks, and an all-steel, hand-built frame. It has been used for generating electricity, milling grain and pumping water, but can be configured to power most any mechanical device requiring less than 1 horsepower.

All models offer two control pedals for adding and releasing pressure to the tool. A pedal lock function can be used in the retract position. The XA foot pump provides fine metering controls to apply the mandatory stroke and force.

ALFRA Electro-Hydraulic Pump SC-03 [DISCONTINUED] Product Part Number: 23006.110-60Hz Overview: ALFRA 23006.110-60Hz SC-03 Electro Hydraulic Pump. This machine carries a 1-year warranty. Features At A Glance: Pump is completed with hand switch,...

ALFRA Electro-Hydraulic Pump AHP-L Product Part Number: 23190.60.UL Overview: ALFRA 23190.60UL AHP-L Electro Hydraulic Pump. This machine carries a 1-year warranty. Features At A Glance: Powerful, hydraulic drive unit to maximum punching...

ALFRA Electro-Hydraulic Pump AHP-M [REPLACEMENT FOR PN 23007.110-60Hz] Product Part Number: 23189.110.60UL Overview: ALFRA 23189.110.60UL AHP-M Electro Hydraulic Pump. This machine carries a 1-year warranty. Features At A Glance: Powerful,...

ALFRA Electro-Hydraulic Pump AHP M [REPLACEMENT FOR PN 03852.110-60HZ] Product Part Number: 03855.110V-60Hz Overview: ALFRA 03855.110V-60Hz AHP M Electro Hydraulic Pump. This machine carries a 1-year warranty. Features At A Glance: ...

ALFRA Electro-Hydraulic Pump AHP S [REPLACEMENT FOR PN 03853.110-60HZ] Product Part Number: 03854.110V-60Hz Overview: ALFRA 03854.110V-60Hz AHP S Electro Hydraulic Pump. This machine carries a 1-year warranty. Overview: Electro-Hydraulic Pump...

ALFRA AHP 03-1 Electro-Hydraulic Pump Product Part Number: 03853.230-60HZ Overview: ALFRA 03853.230-60HZ AHP 03-1 Electro Hydraulic Pump. This machine carries a 1-year warranty. Package Includes: ALFRA 03853.230-60HZ AHP 03-1 Electro-Hydraulic...

ALFRA AHP 03-1 Electro-Hydraulic Pump [DISCONTINUED - REPLACED BY PN 03854.110-60HZ] Product Part Number: 03853.110-60HZ Overview: ALFRA 003853.110-60HZ AHP 03-1 Electro Hydraulic Pump. This machine carries a 1-year warranty. Package Includes: ...

ALFRA SC-05 III B Electro-Hydraulic Pump [DISCONTINUED - REPLACED BY PN 03855.110-60HZ] Product Part Number: 03852.110-60HZ Overview: ALFRA 03852.110-60HZ SC-05 III B Electro Hydraulic Pump. This machine carries a 1-year warranty. Package...

ALFRA LHP-700 Air Hydraulic Pump Product Part Number: 02140 Overview: ALFRA 02140 LHP-700 Air Hydraulic Pump. This machine carries a 1-year warranty. Features At A Glance: Heavy Duty Tank Tank venting ?lter Reduced noise level Oil level...

ALFRA AEP-1 Foot Pump with Hose Product Part Number: 02121 Overview: ALFRA 02121 Compact Electric Foot Pump with Hose. Made in Germany. This machine carries a 1-year warranty. Features At A Glance: Will work with all circular, square,...

ALFRA AEP-1 Foot Pump Set Product Part Number: 02120 Overview: ALFRA 02120 Compact Electric Foot Pump. This machine carries a 1-year warranty. Features At A Glance: Will work with all circular, square, rectangular and special shape hole punches...

ALFRA EP-1 Hand Pump with 36" Hydraulic Hose Product Part Number: 02111 Overview: ALFRA EP-1 Individual Hand Pump with 36" Hydraulic Hose. Country of Origin: Germany. This machine carries a 1-year warranty. Package Includes: ALFRA EP-1 Hand Pump (1)...

ALFRA 02028 Electro-hydraulic Pump Product Part Number: 02028 Overview: ALFRA 02028 Compact Electric Pump 110V. This machine carries a 1-year warranty. Package Includes: ALFRA 02027 Electro-hydraulic pump 110V(1) Hydraulic hose 71" (1.8 m) (1)...

ALFRA 02027 Electro-hydraulic Pump Product Part Number: 02027 Overview: ALFRA 02027 Compact Electric Pump. This machine carries a 1-year warranty. Package Includes: ALFRA 02027 Electro-hydraulic pump(1) Hydraulic hose 71" (1.8 m) (1) User manual...

ALFRA DSP-120 Electro-hydraulic Pump Product Part Number: 02025.110 Overview: ALFRA 02025.110 Compact Electric Pump. This machine carries a 1-year warranty. Features At A Glance: Two-stage operation with holding function for single-acting...

ALFRA AEP-1 Hydraulic Punch With Foot Pump Product Part Number: 02020 Overview: ALFRA 02020 AEP-1 Hydraulic Punch With Foot Pump 2 stage, without hydraulic hose. Country of Origin: Germany. This machine carries a 1-year warranty. Package Includes: ...

ALFRA Foot Switch with 2 pedals Product Part Number: 03866 Overview: ALFRA 03866 Foot switch with 2 pedals and Start-Stop function for Electro-hydraulic pump AHP 03-1. Country of Origin: Germany. This machine carries a 1-year warranty. Package Includes:...