pony hydraulic pump supplier
** There are upgrade options available for faster speed of use when operating. There is a 23HP and a 28HP option. We can also upgrade bigger tank reservoirs and pumps. The base model pony motor advertised typically works well for everyone who has bought one. In over twelve years, one customer complained that the 13HP doesn"t operate his Landoll fast enough. We cannot know your exact setup, so if you are unsure, let us know the size of your rams, send pics, etc., so we can try to get you the best fit for your particular use case. If what you order does not work fast enough for you, we are not responsible and will not cover any cost to upgrade the pony motor.**
We can do the last four pictures with the pony motor installed inside the box on almost any trailer. If you want your pony motor inside one of these boxes, it would cost an additional $1,500 for the custom box.
The Cable Pony winch has been designed for the overhead line (ADSS) and underground cable handling applications coupled with the constant pulling tension.
The power source is from a Honda GTX 390 engine, which powers a tandem hydraulic pump. This pump drives the hydraulic high torque, fixed displacement motor mounted onto the bullwheel drive gearbox. Drum overrun is controlled by the drum drive hydraulic motor and pressure relief valve. The sealed hydraulic oil tank is fitted with an inlet filler/breather, return and suction filters as well as an oil level sight glass.
The rope take-up drum is removable and can be used on both the payout stand and the Cable Pony. When the winch is in the working mode the rear props are extended out of the chassis to provide greater stability
Foster"s line of Electric Hydraulic Power Units are designed and built to last. We use Baldor and other Quality Electric Motors along with American Made Gear Pumps and Pressure Compensated Pumps on Custom Designed Power Units.
Our Gas Hydraulic Power Packs are powered by Honda"s GC and GX line of dependable engines. Along with Kubota"s line of higher horse power engines we offer a very wide spectrum of Pressure and Flow Rates.
Foster has you covered. Thermostat Controlled Heat Exchangers, Reservoir Heaters, Pressure Compensated Pumps and a vast array of Hydraulic Control Valves lets Foster Taylor our Diesel Hydraulic Power Units to your needs.
John Deere, Kubota and Kohler Diesel Engine, optional Marine Grade Powder Coating and Certified Welding make Foster Diesel Hydraulic Power Units a Standard in the Industry!
I have 3 lowboys (lowbeds up here in Canada) with Honda power packs. We use ours every day, heavy hauling is our business, so they get used a lot. What I have found works the best is a 13 hp Honda with a two stage hydraulic pump directly coupled. I use Barnes (I think) pumps, 16 gpm on high, 4 gpm on low, 3000 psi continuous, 3600 rpm. These pumps are used on some log splitters & will work with as little as 8hp. You can use a larger pump than this with the 13 hp, a 21 gpm high/ 6 gpm low, it won"t lift anymore but will be a little faster, but I find the smaller pump is fast enough & doesn"t even make the Honda hardly work. The pumps are about $200, the aluminum adapter that mounts the pump to the motor $50, & a lovejoy coupler maybe $40. The only other thing you will need is a reservoir & return oil filter assuming the valving is already on the trailer. If cost is a factor, you might check out the Honda copycats. The last Honda I bought up here in Canada, for a 13 hp electric start high output alternator was $1300, probably five years ago. I bought a Chinese copycat, 13 hp elec start for $400, have used it for two years, no problems, so I now keep a spare motor/pump combo on the shelf. I have bought all of these items at Princess Auto, a farm/ industrial supply up here in the great white north. We can lift a 70 ton machine with the gooseneck stretched out for a tandem jeep with this pump/motor combo so it will work for you. The main thing is, go for a two stage pump, it is so much faster when raising the empty trailer & still has power to spare lifting the load.
According to the application such as construction machinery and various industrial vehicles and its hydraulic control system, Kawasaki offers the most suitable axial piston pump from the wide range of variations.
Kawasaki offers high efficinecy and low noise axial piston pumps suitable for variable-speed control system. The built-in large capacity suction valve enable easy configuration of the closed circuit for various systems.
Kawasaki"s bent axis type axial piston pumps have features such as high efficniency and long life. They can operate for long periods of time under severe conditions: high-pressure continuous drive, use of fire resistant fluid, etc.
Kawasaki screw pumps have been manufactured since 1936 and they are now being supplied to meet the growing demand in all industrial fields. Kawasaki screw pumps are employed for a great diversity of purposes including conveyance of heavy oils, lube oil service, pressure delivery as well as for hydraulic applications.
The Kawasaki Precision Gear Pumps are produced with the enhanced manufacturing accuracy to improve performance of the external-contact type gear pumps, which have small pulsations and good volumertic characteristics. Those pumps were originally developed for pumping and metering of polymer to the spinnerette in the production of chemical fibers, and have prevailed in many other applications.
Massey Harris Decal Set, Challenger, Colt, Mustang, Pacemaker and Pony, Diesel - For Massey Harris tractor models Challenger, Colt, Mustang, Pacemaker, Pony, 20, 22, 30, 33, 44, 50, 55, 81, 82, 101, 102, 201, 202, 203, 333, 444, 555, 744, 745 (All Diesel), Set of two, (Item #: 102627) $10.50
Massey Harris Decal Set, Challenger, Colt, Mustang, Pacemaker and Pony, LP, Vinyl - For Massey Harris tractor models Challenger (LP), Colt (LP), Mustang (LP), Pacemaker (LP), Pony (LP), 20 (LP), 22 (LP), 30 (LP), 33 (LP), 44 (LP), 50 (LP), 55 (LP), 81 (LP), 82 (LP), 101 (LP), 102 (LP), 201 (LP), 202 (LP), 203 (LP), 333 (LP), 444 (LP), 555 (LP), 744 (LP), 745 (LP), Set of two, Vinyl decal, (Item #: 102626) $10.50
Massey Harris Decal Set, Challenger, Colt, Mustang, Pacemaker and Pony, Mylar - For Massey Harris tractor models Challenger, Colt, Mustang, Pacemaker, Pony, 20, 22, 30, 33, 44, 50, 55, 81, 82, 101, 102, 201, 202, 203, 333, 444, 555, 744, 745, Set of two, Mylar decals, (Item #: 102657) $20.00
Massey Harris Decal Set, Challenger, Colt, Mustang, Pacemaker and Pony, Vinyl - For Massey Harris tractor models Challenger, Colt, Mustang, Pacemaker, Pony, 20, 22, 30, 33, 44, 50, 55, 81, 82, 101, 102, 201, 202, 203, 333, 444, 555, 744, 745, Set of two, Vinyl decal, (Item #: 102628) $10.00Drive Train
Wiring Harness - Cotton braided includes headlight wires and diagram. Like original. For Pony 1947-51 with cut-out relay using Autolite GBM-4804 generator. (Item #: 113770, Ref: MHS063) $270.00Engine Bearings
Rod Bearing - For Pony with Continental N62 Engine. WITH ANGLE SPLIT RODS. Rod Bearing available in Standard, .010, or .020. 4 REQUIRED FOR ENGINE. Price is for Each.Specify in comments section of order form size required. (R) (Item #: CB-524P) $78.29
Cylinder Head, Remanufactured, N62A500 - For Massey Harris tractor model Pony, Replaces Massey Harris Casting number N62A500, Casting No. N62A500, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 204732) $216.01
Piston Ring Set, Standard - For N62 4-cylinder engine in Massey Harris Pony (Standard bore is 2-3/8 inch). Contains: (8)3/32 inch compression rings and (4) 3/16 inch oil rings. This is for a STANDARD bore set. (Item #: 128932, Ref: 2C5671) $102.51Exhaust System
Carburetor Float - Carburetor float for carburetors TSV13, TSV16, TSV24 on MH Pony. Replaces 1500139M91, 850312M1, 850312M2 (Item #: 108488, Ref: R2381) $28.38
Light Switch - For tractors with generator cutout, models Pacer, Pony, 101 JR, 101 SR, 102 JR, 102 SR, 20, 22, 22K, 30, 30K, 44, 32, 81, 82. Replaces 850449M1, 15199A, 827078M91. (Item #: 105312, Ref: 851674M1) $18.60
Light Switch, 3-Position - For tractor models MH101JR, MH101SR, 102JR, 22, 30, 30K, 44-6, 81, 82, Pony all with cut out on generator. Replaces 851674M1, 850449M1, 15199A, 837078M91. (Item #: 105312, Ref: 70208197) $18.60Oil System
Fender - Left Hand - For Massey Harris tractor models Pacer, Pony, Replaces Massey Harris OEM number 850764M12, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126482) $146.80
Fender - Right Hand - For Massey Harris tractor models Pacer, Pony, Replaces Massey Harris OEM number 850763M12, Fits Right Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126483) $146.80Steering
Wheel Bolt - This wheel bolt kit fits the following tractor models: Mustang, Pacer, Pony, 101JR, 101SR, 102JR, 102SR, 20, 22, 30, 33, 333, 44, 44-6, 444, 44 Special, 81, and 82. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: 518611M91, 519278M91, and MP1584. (Item #: 108605, Ref: WB916) $2.10
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $14.00