positive displacement hydraulic pump brands

AGI Industries represents Positive Displacement pumps from industry leading companies like IMO, Colfax, Watson Marlow / Bredel, FMC Fluid Technologies, Roper Pumps, Hydroplex, Ingersoll-Rand ARO, Allweiler, Warren, Houttuin, WiWa, Masosine, and SC Hydraulic Engineering. These brands offer a wide range of PD pump options including rotary gear, peristaltic (hose and tube) piston, plunger, double diaphragm, two and three screw, progressive cavity, and sinusoidal rotor design to serve the onshore and offshore Oil and Gas Industry, the Chemical Process and Hydrocarbon Process Industries, Power Generation, Water and Wastewater, Pulp, Paper and Wood Products industries and most, other markets where reliable operation in low, medium and high pressure pumping of thin to viscous fluid is required.

Product degradation is a costly consequence of improper pump selection, which can lead to product losses, missed deliveries and decreased margins. Anderson Process offers an expansive line of Positive Displacement Pumps specifically engineered to provide consistent product transfer for challenging media.

With decades of experience in fluid dynamics, Anderson Process’s team of pump experts and engineers know that, in the long run, faster pumping isn’t always the right choice for all applications. For example, the transfer of high-viscosity fluids commonly found in the food or pulp and paper industries, or variable-viscosity fluids commonly found in chemical processing, requires a highly efficient pump that is capable of consistent flow rates. And fluids with suspended or fragile solids, such as those found in paints and pigments, need a pump that will minimize shear. Anderson Process’s offerings of Positive Displacement Pumps combine mechanical efficiency with steady flow rates to deliver fluid transfer capabilities that are both cost-effective and consistent.

Anderson Process is proud to partner with longtime pump manufacturers who are leading the industry in positive displacement pump technology. Our brands include Wilden®, Blackmer, Tuthill Pumps, Liquiflo, CAT Pumps, Ampco, and Graco. These brands are known within the process equipment industry for their quality craftsmanship, durability and superior reliability. Our comprehensive selection of diaphragm pumps and rotary pumps are designed to withstand the most demanding applications. Our sanitary pumps are engineered for easy cleaning and minimize contamination risks.

Whether you ultimately need a vane pump or a gear pump, or a piston pump or a lobe pump, Anderson Process’s pump experts will ensure your positive displacement pump is ideally specified and configured for the needs of your application, something warehouse pump suppliers can’t do. As an authorized service center for many of our brands, we can provide the hands-on service required to keep your equipment — and your process — running as efficiently as possible for as long as possible.

Distributor of positive displacement pumps. Other products include high and low viscosity, gear, general purpose water, reverse osmosis, boiler feed, condensate, sump, submersible, air operated, drum, machine tool coolant, multi-stage booster, vacuum, centrifugal, air operated diaphragm, magnetic drive, seamless, metering, piston, progressing cavity, self-priming, solid handling, turbine, and vertical pumps. Repair, testing, and inspection services are available. Value-added pump services include design and application consulting, engineering, research and recommendations, project and individual pump quotations, pick-up and delivery, and rebuilding. Industries served include industrial, HVAC, commercial, biomedical, and chemical sectors. 24-hour shipping available.

DXP represents several world class lobe pump suppliers and applies lobe pumps in multiple markets including food & beverage, pharmaceutical, biotechnology, chemical, municipal and other industrial markets.  Typically lobe pumps are used in sanitary or ultraclean applications but they can also be applied when transporting various forms of sludge, bio-solids or greases.  Unlike other rotary positive displacement pumps, lobe pump use timing gears to prevent the two rotors from contacting one another, allowing them to be more tolerant of solids and also to be more shear sensitive.

Gear pumps are one of the most common types of positive displacement pumps. They provide a constant volume of fluid that passes between the teeth of two meshing gears and the casing. The rotating gears and separation of teeth create a suction that pulls fluid in through the inlet. The gears then trap the liquid and move it around the casing to the discharge or outlet. Each revolution creates consistency in the flow of fluid.

There are two main types of rotary gear pumps, internal and external. Both types use similar principles for pumping fluids. Two gears are inside a casing in a way that the teeth lock together. As a motor turns one of the gears the locking teeth turn the other. The difference in the two designs is that an external gear pump uses side-by-side gears (typically the same size), so when the motor turns one gear, the other rotates in the opposite direction. The internal gear pump design uses two different size gears. A motor turns the small gear, which is inside the larger gear, rotating it in the same direction.

DAE Pumps offers economical rotary gear pumps of both types in a variety of sizes. No other gear pumps can match the performance and durability of our pumps. Because of the close tolerance between the gears and casing, most gear pumps are highly susceptible to wear, but DAE Pumps gear pumps outperform all others. Our pumps process a wide range of viscosities and are ideal for handling fluids at high pressures and low flow rates. DAE Pumps rotary gear pumps are widely used in chemical installations to pump high viscosity fluids. They are one of the most common types of pumps for moving corrosive liquids and hydraulic fluid power applications.

DAE pumps gear pumps provide consistency in moving a variety of slurry materials and are suitable for several industries like paints, food processing, chemicals, oil & gas, and others. Our rotary gear pumps are available in duplex steel, cast steel, and cast iron, among other materials. Contact DAE Pumps to customize a pump to your specific needs.

Every positive displacement pump causes a fluid to move by trapping a fixed amount of fluid and then forcing that trapped volume into the discharge pipe or displacing the fluid. There are two main types of positive displacement pumps – reciprocating and rotary.

With reciprocating positive displacement pumps, a certain volume of liquid is collected in enclosed volume and is discharged using pressure. There are different types of reciprocating pumps including piston pumps, plunger pumps and diaphragm pumps. All are more suitable for low volumes of flow at high pressures.

A rotary pump is a positive displacement type pump with a chamber that contains elements that are actuated by the relative rotation of the drive shaft to the casing. These elements may be gears, cams, screws, lobes, vanes, plungers or similar elements. The casing has no separate inlet or outlet valves.

A rotary PD pump is often used for high viscosity fluids. In fact, a rotary pump is one of the main types of PD pumps used across many industries, due to the versatility of designs. Uses for a rotary PD pump include:Food processing

One of the main advantages of a positive displacement pump is its ability to produce a consistent flow rate even when there are changes in pressure. Centrifugal pumps, on the other hand, are designed to react to changes in pressure.

As previously mentioned, a PD pump is also good for highly viscous fluids, because the flow rate of a positive displacement pump increases as viscosity increases. In addition, because PD pumps do not have any high-speed components, they will not apply a great deal of shear to fluids, so they are ideal for shear sensitive mediums. They are also specified for applications that require suction lift capabilities.

Many different types of positive displacement pumps are available at various price points. Choosing the best PD pump helps optimize performance, while poor selection leads to wasted energy and increased lifetime pump cost.

Our team can develop durable, cost-effective rotary pump solutions for your unique requirements in Colorado, Wyoming and the Rocky Mountain states. Contact Centennial Equipment today and let our team help you find the best positive displacement pump solution for your needs.

ProcessFlo offers a variety of positive displacement pumps, including air operated diaphragm (AODD), rotary lobe, progressive cavity, internal and external gear, diaphragm, metering, sliding vane, and peristaltic pumps for hygienic and industrial applications.

Also known as gear pumps, these have few moving parts so they"re less prone to wear than other hydraulic pumps. Combine with an electric motor to generate flow in a hydraulic system. To mount to a NEMA C-face motor, use a Pump-to-Motor Mount (sold separately).

Positive displacement pumps create suction lift to push fluid mechanically through the system at a constant speed, regardless of inlet pressure. Positive displacement pumps are popular in water treatment, oil and gas, chemical and food and beverage industries due to their ability to operate effectively under high viscosity, high pressure, and differential flow operations.

Flo-Line is a proud partner of industry leading positive displacement pump manufacturers such as Pulsafeeder, Netzsch, Circor, Yamada, Abel, and more. Depending on the solid content or toxicity of the fluid, our extensive range of pumps offers a solution for every process need. Contact us for more information or request a quote on the positive displacement pump you need.

Along with centrifugal pumps, positive displacement pumps are one of the main types of pumping and fluid transfer solutions available for commercial applications. These pumps are typically used in cases where a constant flow rate is required.

The chambers within positive displacement pumps hold a fixed volume of liquid dependent on the requirements of your application, allowing them to transfer fluid at a constant pressure. We offer several variations of positive displacement pumps, including diaphragm pumps, progressive cavity pumps, rotary lobe pumps, gear pumps, and more.

A Liberty Process progressive cavity pump ideal for liquids with higher viscosities or thickness.  A progressive cavity pump will have about the same flow for any liquid viscosity. The mechanical efficiency and volumetric efficiency goes up when the viscosity increases, with lower power and more flow. If you have a pumping application where you need a constant flow, but the liquid viscosity is variable and will change, then the PC pump is an ideal choice.

A progressive cavity pump is good when the application requires a varied flow. A progressive cavity pump has a precise flow per revolution of the pump. It is therefore quite easy to regulate the pump flow by just simply regulating the pump speed. Modern pump speed controllers like variable frequency drives (VFD’s) are well suited to be used with progressive cavity pumps for varying pump speed and flow control.

Another good application for a progressive cavity pump is when the suction conditions of the pumping applications are not ideal. A progressive cavity pump requires much lower Net Positive Suction Head (NPSH) as compared to a centrifugal pump because the internal pump velocity is lower. A progressive cavity pump can pump when the suction pressure is as low as 28″ of mercury (Hg), a centrifugal pump cannot do this. A progressive cavity pump will easily fill and pump in difficult applications when a centrifugal pump will not.

Progressive cavity pumps are ideal for applications where the liquid is sheer sensitive again because of lower internal velocity. A good example would be pumping oil and water mixtures to separation devices. The separation device works much better when the oil droplets are larger. A progressive cavity pump will not change the oil droplets where a centrifugal pump will emulsify the oil and make the oil droplets very small and reduce the separation performance of the separator.

A progressive cavity pump is good to use when the liquid contains abrasive solids. Most other types of positive displacement pumps can’t pump solids very well or for very long due to their close tolerances and all metal designs. A gear pump or vane pump will simply wear out when solids are present in the liquid and the same would also happen to most centrifugal pumps and they could clog. A progressive cavity pump is designed to last longer than all other pumps on abrasive applications. The pump design with the rotor and stator is the heart of the pump design for abrasion resistance. The internal velocity of the liquid as it travels through the pump is much lower than other types of positive displacement pumps and centrifugal pumps and the rubber stator.

Viking Pump, a Unit of IDEX Corporation, leads the world in the design and manufacture of rotary Positive Displacement Pumps for use in some of the toughest applications. Since 1911, our innovative products have been key contributors to successful operations in virtually every industry—from military, to food and beverage, to chemicals, fuels, and plastics—reliably pumping materials that are thin, thick, hot, cold, liquid, solid, etc.

Positive displacement pumps are used in a variety of applications.  They function by trapping a specific amount of fluid inside a cavity and then pushing the fluid to the exit port of the pump. Typically, users elect to use positive displacement pumps when they want consistent flows and viscosities are too high to be handled by centrifugal pumps. Glauber Equipment is a premier supplier of positive displacement pumps.  A more detailed explanation of how displacement pumps can work for your specific application is outlined below.

With a positive displacement pump, liquid flows into the pumps as the cavity on the suction side expands and the liquid flows out of the discharge as the cavity collapses. The volume is a constant given each cycle of operation. The positive displacement pumps can be divided in two main classes, reciprocating and rotary.

A positive displacement pump moves liquids by pressurizing the fluid, allowing it to pass through the system and be drawn into an expanding chamber. Once the specified volume of liquid is in the chamber, it then contracts and forces the fluid out of the pump. Its design ensures a consistent discharge of fluid at the pressure required to move it through the system’s piping. Positive displacement pumps provide constant flow with changing pressure. Also, its efficiency increases with increasing viscosity and increasing pressure.

The liquid is drawn into the pump by creating negative pressure at the inlet port, making the pump self-priming and ensuring a continuous flow regardless of pressure. Typically, these pumps operate at lower speeds and produce more pressure than a centrifugal pump. They are a common component of hydraulic systems and other applications that require high pressure and low flow rates.

Positive displacement pumps shouldn’t operate against closed valves on the discharge side of the pump. There is no shut off head on them like on centrifugal pumps. If so, operating against closed discharge valves continues to produce flow until the pressure in the discharge line is increased until the line bursts or the pump is severely damaged – or both.

Rotary positive displacement pumps move fluid through the use of a rotating element. The element develops a liquid seal with the pump casing, creating suction at the inlet port and displacing the fluid from the reservoir to the outlet.

In a reciprocating pump, the repeated backward and forward movement of a diaphragm, piston or plunger transports the fluid from the reservoir. The reciprocation or cycle of the driving element creates suction at the inlet port and compression at the outlet.

A linear pump moves the fluid in a straight line by using a mechanical element to capture the liquid and move it through a tube to the outlet port. The volume capacity of a linear pump is limited, but because this type of pump is set in a static location, calibrations are not necessary.

Glauber Equipment specializes in producing a wide range of positive displacement pumps designed to meet the specific applications of our clients. They meet the needs of many applications, including:

Positive Displacement pumps by John Brooks Company are commonly used for pumping high-viscosity fluids such as oil, paints, resins or foodstuffs. They are preferred in applications where accurate dosing or high-pressure output is required. The production of a pump is not affected by pressure and is selected where the supply is irregular. These pumps function to move fluid by repeatedly enclosing a fixed volume, with the aid of seals or valves and moving it mechanically through the system. The pumping action is cyclic and is driven by pistons, screws, gears, lobes, diaphragms or vanes. There are two main types: Reciprocating and Rotary.

A Positive Displacement pump (PD pump) is a mechanical device which displaces a known quantity of liquid for every revolution or cycle that the pump completes. The flow rate through a positive displacement pump is directly proportional to its speed and number of cycles over a given time.

A positive displacement pump works by using a screw, a blade, a vane, a lobe, a gear or diaphragm. It creates a chamber or cavity between the pumping elements and the cavity in which the fluid is temporarily stored is moved by the reciprocating or rotary motion along the pipe to its destination.

Progressive Cavity Pump has a rotor rotating within a housing called a stator. The rotor is always metallic and the stator is made up of a rubber type of material. It looks somewhat like a screw thread – the fluid is between the cavities and the rotary motion of the rotor forces the fluid through from one end to the other. It has a low to moderate capacity, low to high pressure, good solids handling capability, one seal, low shear, constant flow and a low pulsation.

Rotary Lobe Pumphas moderate to high capacity, low to moderate pressure, good solids handling capability, two/four seals, a constant flow and moderate pulsation.

Screw Pump –the screw pump has multi versions known as multi screw pumps featuring moderate to high capacity, high pressures, only lubricative liquids, no solids handling capability, one seal and a constant flow.

Diaphragm Pump – Air Operated Diaphragm Pump has low to moderate capacity, low to moderate pressure, very low efficiencies, no seal and high pulsation.

Positive Displacement pumps are generally used for fluids with a relatively high viscosity. They can be used where high accuracy is required e.g metering or dosing. They can also be used where high pressures are required i.e high pressure washing. Waste Water Treatment is another application e.g Netzsch Tornado Rotary Lobe Pump

The main advantages of a Positive Displacement Pump is that it can handle highly viscous fluids whereas a Centrifugal Pump would be inefficient and require high driver powers. PD pumps also have a good volumetric efficiency & driver power is kept to a minimum. The flow rate is easily adjustable via a speed control because the flow rate is directly proportional to its speed. Driver sizing is not as critical as with a Centrifugal pump because the pump will deliver the known quantity of fluids regardless of system back pressure (losses). A Positive Displacement Pump  can produce a very low shear action in the case of sensitive fluids.

The main disadvantages of a Positive Displacement Pump  vs a Centrifugal pump is that dry running can be catastrophic due to either close clearances of parts or in the case of progressive cavity pumps the interference fit between the rotor and stator. All PD pumps require the installation of a pressure relief valve to prevent failure of the pump or piping in case of accident or closure of the delivery valve or blockage in the piping. Main pd pumps will produce pulsations which can lead to undesirable effects i.e vibration, product damage & water hammer.  PD pumps have a limited flow range ~1000m³/hr vs 180,000m³/hr Centrifugal Pumps. The material of construction of PD pumps are more limited in range of available materials than that of Centrifugal Pumps and finally PD pumps have limited solids handling ability in terms of size and/or content.

A Positive Displacement Pump will usually self-prime due to the very small clearances which exist within the pump. This will help it pull a vacuum and thus expel the air through the pump until the liquid reaches the pump. Care should be taken on the suction line i.e installation of a “goose neck” which will ensure there is some liquid in the pump during the priming cycle which will prevent dry running & consequently failure.

An Air Operated Diaphragm pump (AODD pump) is able to self-prime without any liquid being present but this capability to lift is limited if the line is empty of fluid.

Certain Positive Displacement Pumps can run dry  i.e Air Operated Diaphragm pumps have no parts requiring lubrication or no close clearances between parts. Peristaltic pumps can run dry as the hose is lubricated in a bath of its own fluid. Other types of PD pumps should not be run dry.

Every pump has a NPSH (Net pressure suction head) required to ensure reliable and trouble-free operation without damage caused by cavitation therefore therefore the  system should be designed to ensure there is a sufficient margin between NPSHA (Net pressure suction head available) and NPSHR (Net pressure suction head required).

Unlike a centrifugal pump which produces pressure, a positive displacement pump does not produce pressure – it is the system itself that develops pressure from the pressure drop which then creates a back pressure which largely depends on the flow rate through the system i.e higher flow rates will result in higher losses and as a result a higher back pressure. The back pressure is also dependent on the pressure in the vessel at the point of discharge i.e a hydrogen blanket present or steam. The pressure is controlled largely by the pumping rate, therefore, pressure is controlled by varying the speed of the pump. In cases where the variable speed drive is not deployed the system pressure will be controlled to a degree by the setting of the pressure relief valve.

Positive Displacement Metering pumps are usually used where a high degree of accuracy is required e.g in dosing applications where pH control is required e.g Waste Water Treatment Plants or where filling lines require accuracy of volumes of fluid dispersed into containers.

Flexachem are the leading distributors for Netzsch Positive Displacements Pumps in Ireland – Progressive Cavity Pump, Rotary Lobe Pump (Industrial applications) & Screw Pump. We also supply Inoxpa Sanitary Rotary Lobe Pump and Flotronic Air Operated Diaphragm Pumps for the Food & Beverage & Pharma sectors.

We provide localised technical support & on-site service engineering to support the operational needs of our clients. We also hold a heavily stocked inventory to help take the pressure off you in the event of unexpected emergencies. Why not contact one of our Pump Specialists if you have a particular application in mind.

Since 1929, Northern Pump has manufactured HIGH PRESSURE heavy duty positive displacement rotary gear pumps. With Northern’s inception as Northern Fire Apparatus Company through modern day, as part of McNally Industries, the intention is to manufacture a gear pump that can outperform others in high pressure and severe applications.

Northern® Heavy Duty gear pumps are available in all shapes and sizes. Our modular design allows us to customize a gear pump for your specific application.

Skilled mechanics at the Northern factory are standing by to recondition your pump back to it’s original condition. After a careful disassembly process, the entire pump is inspected to determine parts that need replacement or reconditioning.

Northern Pump has manufactured precision gear pumps for over ninety years. Yet, we still encounter new applications daily. Chances are, we already have experience with your application.

Midstream Company Utilizes the Northern® 4800Crude Oil Pipeline Injection Pump Grantsburg, WI – Northern Pump, entered into a purchase agreement with a […]

Northern Melts Away Sulfur Pump Delivery Concerns Grantsburg, WI – Northern Pump, successfully delivered two custom pumps for an international customer in […]

Northern 4800 Crude Oil Injection Pump Offshore Application Northern Pump, successfully completed a field overhaul project for a key crude oil pipeline […]

Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.

The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.

When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.

First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.

Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.

Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.

All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.

Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.

To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.

When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.

Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.

Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.

Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.

Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.

External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.

Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.

Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.

Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.

Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.

Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.

Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.

Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.

Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.

Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.

Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.

To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.

To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).

Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.

The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.

Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.