power gear hydraulic pump motor manufacturer
Impeller blades revolve inside the casing, rotating the surround fluids. the blades also lubricate and cool the system. Pump bearings are often made to anti-friction, to help the impeller rotate inside the casing. The pump shaft is made of steel, and its size corresponds to the size of the impeller.
A hydraulic hand pump transforms human power into hydraulic energy by combining pressure and flow. The foundation for hydraulic fluid delivery is the simple notion that a handle gives an internal piston leverage under manual pressure. The piston then pushes the hydraulic fluid into the cylinder port. Water and hydraulic fluid are the two most common fluids, and however other pressure media can also be used.
The hydraulic pressure generated can be used to test, calibrate, and adjust various measuring instruments and tools. Hydraulic hand pumps are widely used to load and test mechanical parts when a user requires precise adjustments. They are also used in lifting and lowering heavy things in material handling equipment, which similarly necessitates precise control over the movement of the objects.
The working medium, requisite pressure range, drive type, etc., are only a few of the functional and hydraulic system requirements that are considered when manufacturing hydraulic pumps. In addition, there are numerous design philosophies and hydraulic pump combinations to choose from. Due to this, only a few pumps can completely fulfill all needs. The most common types of hydraulic pumps have already been described.
The use of hydraulic pumps is still common in industrial settings. Elevators, conveyors, mixers, forklifts, pallet jacks, injection molding machines, presses (shear, stamping, bending, etc.), foundries, steel mills, and slitters are examples of equipment used in material handling. With an application"s need, a hydraulic pump is more likely to be used.
Additionally, hydraulic pumps are used in every conceivable mobile or industrial hydraulic machine. They are used on many different pieces of gear, such as excavators, cranes, loaders, tractors, vacuum trucks, forestry equipment, graders, dump trucks, and mining equipment. Mobile applications use hydraulic pumps more commonly than industrial applications since industrial devices typically don"t use electric actuators.
Hydraulic motors (sometimes incorrectly spelled as “hydrolic” motors) convert hydraulic pressure into force that is able to generate great power. They are a type of actuator that converts the pressure of the moving hydraulic fluid into torque and rotational energy.
Hydraulic motors are an important component overall in the field of hydraulics, a specialized form of power transmission that harnesses the energy transmitted by moving liquids under pressure and converts it into mechanical energy. Power transmission is a general term denoting the field of translating energy into usable, everyday forms. The three main branches of power transmission are electrical power, mechanical power, and fluid power. Fluid power can further be divided into the field of hydraulics and the field of pneumatics (translating the energy in compressed gas into mechanical energy).
Arguably, hydraulic power traces back to the beginnings of human civilization. For thousands of years, humans have harnessed the power of moving water for energy. (The most basic “hydraulic” application is harnessing moving water to turn wheels.) For a brief survey of hydraulic history, please refer to our article on Hydraulic Cylinders.
In terms of hydraulic motor development, the middle of the Industrial Revolution proved to be a notable turning point. During that year, English industrialist William Armstrong started developing more efficient applications of hydraulic power after observing inefficiencies in water wheel usage on a fishing trip. One of his first inventions was a rotary, water-powered engine. Unfortunately, this invention failed to attract much attention, but it provided an early model for a rotary actuator based on hydraulic power.
The use of hydraulic systems in general offer several advantages within the overall field of power transmission. Some of those advantages include efficiency, simplicity, versatility, relative safety, etc. These and other advantages are further elaborated on in our article on Hydraulic Pumps.
Hydraulic motors are able to produce much more power than other motors of the same size and for this reason are used for larger loads than electric motors.
When space constrictions are an issue, small hydraulic motors are used. Small hydraulic motors have small stroke lengths; they may be less than an inch.
A major disadvantage of using hydraulic motors is inefficient usage of the actual energy source. Power systems with hydraulic motors can consume large amounts of hydraulic fluid. For example, it is not uncommon for hydraulically-driven machines on construction sites to require 100 or more gallons of hydraulic oil to operate.
Since they are often confused in everyday language, it is important to distinguish between hydraulic motors and hydraulic power packs or hydraulic power units. Technically speaking, an enclosed mechanical system that uses liquid to produce hydraulic power is known as a hydraulic power pack or a hydraulic power unit. These packs, or units, generally include a reservoir, a pump, a piping/tubing system, valves, and actuators (including both cylinders and motors). It is not uncommon, however, to hear a hydraulic motor described as consisting of these components – a reservoir, a pump, etc. However, it is more accurate to describe a hydraulic motor as a part of an overall hydraulic power system that works in sync with these other components. Hydraulic motors are a type of actuating component within an overall hydraulic power system – a component responsible for actually translating hydraulic energy into mechanical energy.
Liquids represent a “median” state between gases and solids on the matter spectrum. Despite this, liquids represent solids far more than gases in an important aspect: they are virtually incompressible. One consequence of this is that force applied to one point in a confined liquid can be transmitted quite efficiently to another point in that same liquid. This reality forms the basis of the mechanical energy that hydraulic systems are able to produce. For a fuller explanation of how hydraulic power works, please refer to our article on Hydraulic Pumps.
It has previously been noted that “Pascal’s Law” applies to confined liquids. Thus, for liquids to act in a hydraulic fashion, it must function with some type of enclosed system. As noticed in the introduction, these “systems” are known as hydraulic power packs and share three main parts—a reservoir, a pump and an actuator—that work together to convert hydraulic energy into mechanical energy.
Hydraulic motors are an integral part of machines that rely on hydraulic power for operation because they actuate and “complete” the process of converting hydraulic energy into mechanical energy. Since hydraulic motors are fairly simple machines that are composed of rotating machinery, they specifically translate hydraulic energy into rotational mechanical energy. The main enclosure and interior components of the motor are made from metal such as steel or iron so they can withstand high pressures and operating speeds. In a sense, motors can be thought of as hydraulic pumps working “backward” or in reverse.
Overall, a hydraulic power unit pumps fluid (usually a type of oil) via a small pneumatic engine from a reservoir and sends it to the motor while regulating fluid temperature. Oil is pumped from the reservoir through an inlet valve to an outlet valve through a series of gears, turning vanes or cylinders, depending on what specific type of hydraulic motor it is. Pressurized fluid creates mechanical energy and motion by physically pushing the motor, causing the rotating components to turn very quickly, and transferring energy to the machinery that the motor is linked to. Typically, not every rotational component is directly connected to producing mechanical energy; for example, in a typical gear motor, only one of the two gears is connected to and responsible for turning the motor shaft. This type of operation directly contrasts with electric engines, in which electromagnetic forces produced by flowing electric current are the response for rotating the motor shaft.
Hydraulic motors, rotary or mechanical actuators which is operated by the conversion of hydraulic pressure or fluid energy to torque and angular displacement.
Driveshaft, a part of the hydraulic motor that delivers or transfers the torque created inside the motor to the outside environment where it is used for lifting loads and other applications.
Vane hydraulic motors have a hydraulic balance that prevents the rotor from sideloading the shaft, with the pressure difference develops the torque as the oil from the pump is forced through the motor.
There are three basic kinds of hydraulics motors: gear, vane and piston type. Each is identified by the design of the rotating component inside. Collectively, the various types of hydraulic motors are optimal for a wide range of specific applications, conditions or usages.
Another common type of hydraulic motor. Radial piston hydraulic motors have pistons mounted around a center shaft that is eccentrically balanced. Fluid causes the pistons to move outward, causing rotation. Axial piston hydraulic motors derive their name from the fact they use axial instead of radial motion, despite their similar design to radial piston motors.
Built into wheel hubs to supply the power needed to rotate the wheels and move the vehicle. A hydraulic wheel motor can operate a single wheel or multiple wheels, depending on the power of the motor and the size of the machine.
Other motors focus on the rotational speed and torque. High speed hydraulic motors convert hydraulic pressure into force at elevated rotations per minute thereby generating large amounts of power. High torque hydraulic motors run at low speeds while operating with increased torque, thus earning the name low speed-high torque (LSHT) motors.
Advances are still being made to hydraulic motors and their various applications. One example is the development of hybrid hydraulic automobiles, which are being developed as an alternative to gas/electric hybrid cars. Hybrid hydraulic vehicles are particularly efficient at reclaiming energy when braking or slowing down.
A type of orbital hydraulic motor, have rollers that are hydro-dynamically supported to minimize friction, ensuring maximum durability and high output at high pressure.
A type of orbital hydraulic motor, are particularly suited for long working cycles at average pressure. Rotor motors are operated by lobes that are fixed and set directly on the stator.
Hydraulic systems and their use are abundant in a wide variety of fields including construction fields, agricultural fields, industrial fields, transportation fields (e.g. automotive, aerospace), various marine work environments, etc. Hydraulic motors are commonly used in machinery that requires strong pressurized actions such as aircraft for raising the wing flaps, heavy duty construction vehicles such as backhoes or crane industrial lifting or for powering automated manufacturing systems. Hydraulics motors are also used in trenchers, automobiles, construction equipment, drives for marine winches, waste management and recycling processes, wheel motors for military vehicles, self-driven cranes, excavators, forestry, agriculture, conveyor and auger systems, dredging and industrial processing.
While hydraulic power transmission is extremely useful in a wide variety of professional applications, it is generally not recommended to use only one form of power transmission. Although it is somewhat counter-intuitive, the maximum benefit of each form of power transmission (electrical, mechanical, pneumatic, and hydraulic) occurs when each form is integrated into an overall power transmission strategy. As a result, it is worthwhile to put in an effort to find honest and skilled hydraulic manufacturers / suppliers who can assist you in developing and implementing an overall hydraulic strategy.
You should also make sure to discuss the pros and cons of different motors with your manufacturer in order to select the best one for your specific application. For example, vane motors generally cost less than piston type motors. However, they generally do not achieve the same efficiency as piston type motors, nor do they typically last as long. Properly identifying and weighing different factors such as these will enable you to choose the right motor for the right application.
Despite the apparent simplicity of hydraulic systems, engineers and manufacturers must take into account certain variables in order to build an efficient and safe device. The fluid used in the motor or system must be a good lubricant, first and foremost. It should also be chemically stable and compatible with the metals inside the motor. The pump, fluid reservoir and relief valves should be of appropriate power, capacity or strength to allow the motor to perform at optimum levels.
Problems with hydraulic motors can often be traced to poor maintenance, the use of improper fluid within the motor, or improper usage of the motor itself. Some not uncommon causes of motor failure are:
It is important to keep in mind that hydraulic motors are designed to function within certain limits which should not be exceeded. Those limits mainly include torque, pressure, speed, temperature, and load. To give one example, operating a hydraulic motor at excessive temperatures thins hydraulic fluid, negatively affects internal lubrication, and decreases overall the efficiency of the motor. Staying within a motor’s operational limits will preempt unnecessary and needless malfunctions.
In terms of safety, the relative simplicity of hydraulic systems and components (when compared to electrical or mechanical counterparts) does not mean they should not be handled with care. A fundamental safety precaution when interacting with hydraulic systems is to avoid physical contact if possible. Active fluid pressure within a hydraulic system can pose a hazard even if a hydraulic machine is not actively operating.
A container that stores fluid under pressure. Accumulators, the common types of which are piston, bladder and diaphragm, are used as an energy source or to absorb hydraulic shock.
The amount of fluid that passes through a pump, motor or cylinder in a period of time or during a single actuation event, such as a revolution or stroke.
Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.
The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.
When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.
First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.
Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.
Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.
All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.
Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.
To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.
When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.
Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.
Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.
Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.
Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.
External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.
Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.
Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.
Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.
Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.
Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.
Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.
Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.
Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.
Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.
Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.
To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.
To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).
Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.
The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.
Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.
Some of these hydraulic pumps are examples of gear pumps. Gear pumps can be operated in a number of ways. Electric hydraulic pumps are often equipped with gears as a method of transmitting liquid from one area to another. Many other gear pump varieties are powered by gas motors. Hydraulic gear pumps are used in the automotive, agricultural, construction, defense contracting and manufacturing industries.
There are two main hydraulic gear pump varieties: external gear pumps and internal gear pumps. External gear pumps feature two spur gears, both of which gears" spurs are externally oriented. Internal gear pumps also have two spur gears, each gears" spurs are internally oriented, with one gear rotating around inside of the other gear.
Both kinds of gear pumps supply a regular amount of liquid for every rotation of the gears. Hydraulic gear pumps are favored because of their relatively simple design, their versatility and their effectiveness. Also, because they are available in multiple configurations, they can be applied in a wide variety of contexts in industry as well as in commercial and consumer products contexts.
Because of the wide variety of contexts in which hydraulic pumps are used, and because of the varying kinds of tasks that require the use of pumps within each of those contexts, the demand for hydraulic gear pumps, as well as many other hydraulic pump varieties, is likely to remain for the foreseeable future.
Hydraulic Pumps are one of the most important parts of a hydraulic system. International Fluid Power, Inc. offers of full line of pressure loaded fixed displacement hydraulic gear pumps to meet your needs. Pump displacement ranges from .16cc to 89cc. Standard SAE AA, A, or B mounts with keyed or splined shaft offerings. Straight gear, helical gear, or incline gear styles are available to help meet any noise reduction requirements you may encounter. Aluminum body with cast iron mount and cap are standard. Hi-Lo pumps are also included in our offering.
Brevini Fluid Power is a leading manufacturer of hydraulic components in Italy and Europe. Its headquarters is located in Reggio Emilia, Italy and has direct subsidiaries in Italy, France, England, The Netherlands, Germany, Romania, China, India, Singapore and the USA.
Dynamic Fluid Components, Inc. is an ISO 9001:2008 quality certified company offering a full range of hydraulic products and supported by a full service test and repair facility. Dynamic Fluid Components, Inc. product offerings include, fixed displacement hydraulic gear pumps, including a dual stage HI/LO pump, low speed high torques hydraulic motors, flow control valves, check valves, pressure gauges, pressure switches and hydraulic pressure test points and diagnostic testing kits.
Brevini Fluid Power is a leading manufacturer of hydraulic components in Italy and Europe. Its headquarters is located in Reggio Emilia, Italy and has direct subsidiaries in Italy, France, England, The Netherlands, Germany, Romania, China, India, Singapore and the USA.
For many years FluiDyne has provided our customers with professional and competitive services and products. Our Promise is to serve and respect the distributors and resellers of North America and the global market with high quality new and remanufactured pumps, motors, valves, filters and filter elements.
A hydraulic system may use one or more motors. Essentially, these motors work by converting hydraulic (fluid) pressure and flow into mechanical power (torque). Hydraulic motors strongly resemble hydraulic pumps in their basic design—in fact, some motors can even be used as pumps if necessary. Hydraulic motors are used in a very broad range of applications, including but not limited to cranes, winches, conveyors, excavators, roll mills, and many others.
As these devices can be found in widely varying applications, hydraulic motors are manufactured in a number of radically different types, each of which with its own unique features.
Gear motors – Hydraulic gear motors utilise an idler gear and a drive gear in a side-by-side configuration. The flow of fluid coming in through the inlet turns the interlocking gears conveying the fluid through the device and into the outlet opening. These inexpensive units are valued for their versatility and dependability.
Piston motors – Hydraulic piston motors are noted for their high power and torque outputs at high and low speeds. These motors are produced in two main varieties. The radial type has multiple pistons around a central shaft, in a design that resembles a star. The axial design is the more common and more compact of the two, with the pistons being housed within a circular cylinder block
Vane motors – These motors contain a series of thin vanes protruding from a rotor to create compartments that carry fluid from the input to the output. Hydraulic vane motors are widely known as quiet, easy-to-service devices.
Orbital motors – These motors generate very high torques by employing a gear-inside-a-gear (Gerotor) design. They also feature a spool or disc distributor valve that helps direct the fluid correctly.
You can count on a leading hydraulic motor supplier to provide the motors needed for any application. Just as we stock hydraulic pump parts, we offer the parts to build and repair hydraulic motors in the most cost-effective manner. Efficient tools are at your disposal to order quickly and spend little time ordering critical hydraulic components.
White House Products makes it fast and simple to search for hydraulic system parts. Enter a part number or keyword into the Quick Find search tool, or browse the entire catalogue by category, sub-category, and manufacturer. Even search according to OEM or machine type.
When you register on the website, you’ll be able to see prices for hydraulic moors and parts. Product pricing is visible as soon as you log in. Add items to the shopping basket, which stores the details of each item of interest until you purchase it using the secure shopping cart.
If you don’t see a desired hydraulic motor or product online, you can request a hydraulic system supplier catalogue. The catalogue is available in sections that can be viewed online or downloaded to your computer, so product listings can be referenced offline. Our technical support team is always on hand to take your enquiries and help find what you need.
The full inventory of hydraulic motors and other products is available in the United Kingdom (with next-day delivery) and to customers all over the world. Our service is quick, our support team is courteous, and our prices are competitive to match our high standards.
As the new member of the Hydro product range, the hydraulic diaphragm metering pump Hydro/ 2 API 675 (HA2a) meets the requirements of API 675. The pumps stand ...
The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To reduce heat loss, Rexroth external gear ...
... and accessibly priced, aluminium gear pumps and motors are among the components most widely utilized in the field of hydraulic applications. Gear pumps ...
Gear pump with reversible Rotation direction and internal drainage. Built in aluminium body, lighter than casting pumps, permits to work at high pressures with a low level of noise.
Gear pumps with heavy duty body, side and rear ports. Double support by taper roller bearings on the agricultural shaft with modified length. Specialty: agriculture long shaft.
Like all the pumps of the HP Series, it is suitable for any hydraulic application which require very high hydraulic output pressures and a moderate and controllable oil flow, to ensure ...
The HP-AP pump, like all HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series air-hydraulic ...
The HP-RC pump, like all the HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series ...
Three piece pumps with aluminum body and flanges, available in single or multiple pump configurations. Stackable with pumps of different families. Wide range of shafts and flanges. Configurations ...
The product range of Bucher Hydraulics includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, ...
... describes Marzocchi external single gear micropumps, ¡heir operating features and hew to select the right pump for the required application. Miaopumps are small hydraulic ...
This electric/hydraulic pump is a two-stage, continuous pressure (demand) pump that contains all the necessary controls and circuitry for powering any single- or double-acting
Gear pumps GP1K Group 1 is an Ideal solution for hydraulic power packs. Modern technologies and many years of experience of the HYDROSILA company allow us to create pumps ...
The pump series Eco-MAX developed by ITH is built for standard applications like service and assembly jobs. The pump series is available in two different designs:
The OMFB offers wide array of gear pumps available for utilization in applications that requires medium, high and very-high pressure of up to 320 bar maximum. These pumps also strictly ...
The pump with a maximum flow rate of 300 bar is specially designed to lessen a volume by means of a fixed crank-driven piston within a cylinder. It has 3 and 4 bolt ISO flange, swash plate and bent axis design piston ...
Hydraulic pump motor units assembled with electrical motor and hydraulic gear pumps. They are simple hydraulic pump system without hydraulic tanks. Hydraulic pump and motor system driven by electrical motors. Each hydraulic pumps and motors unit is designed and manufactured by
Hydraulic pump & motor systems with powerful 12V DC and 24 V DC motors complete with an hydraulic gear pump creating pressure up to 300 bar and flow up to 20 L/min. Each
These small DC electric hydraulic pump systems assembly with a fan-cooled electric DC motor and aluminum hydraulic gear pumps. Each hydraulic motor and pump system offers flow up to 32 L/min and pressure up to 210 bar. The fan-cooled part make hydraulic motor pump system DC motors work duty S2 and S3 possible.
Our wide range of AC motors voltage come with AC110V,AC220v,240v,AC380V,AC415V, single-phase and three-phase; electric power from 0.37kw up to 3Kw. 50Hz or 60Hz. And customized AC hydraulic pumps and motors system are available.
Each AC hydraulic pump motor is available with a hydraulic gear pump, which can be fitted to offer hydraulic fluid pressures to 250 bar and hydraulic fluid flows to 55 L/min.
Hydraulic pumps are mechanical devices that convert mechanical energy into hydraulic energy. They generate flow with enough power to overcome pressure induced by the load. Hydropack offer group 30 external gear pumps with different specifications.