power gear hydraulic pump motor brands

Norman Equipment has been a leading supplier of hydraulic equipment including hydraulic piston pumps and motors for over 70 years. Full-line authorized stocking distributor of quality hydraulic components and systems from top manufacturers renowned for performance and reliability.

We recommend using the piston pumps in high-pressure applications. In some cases, it is more economical to run a piston pump compensated that puts out a very low output flow until needed. This lowers electric cost and pump wear that may reduce system down time.

Norman currently stocks the Parker Denison PV (PVP) units and is part of the Parker Denison Distribution Network if another unit is needed that is not in stock at Norman Equipment. Denison is one of the most recognized names in hydraulic units in the world. For many years, their products were recognized by their distinctive blue color. Today, the Denison brand is part of the Parker-Hannifin family and all pumps are painted black.

Impeller blades revolve inside the casing, rotating the surround fluids. the blades also lubricate and cool the system. Pump bearings are often made to anti-friction, to help the impeller rotate inside the casing. The pump shaft is made of steel, and its size corresponds to the size of the impeller.

A hydraulic hand pump transforms human power into hydraulic energy by combining pressure and flow. The foundation for hydraulic fluid delivery is the simple notion that a handle gives an internal piston leverage under manual pressure. The piston then pushes the hydraulic fluid into the cylinder port. Water and hydraulic fluid are the two most common fluids, and however other pressure media can also be used.

The hydraulic pressure generated can be used to test, calibrate, and adjust various measuring instruments and tools. Hydraulic hand pumps are widely used to load and test mechanical parts when a user requires precise adjustments. They are also used in lifting and lowering heavy things in material handling equipment, which similarly necessitates precise control over the movement of the objects.

The working medium, requisite pressure range, drive type, etc., are only a few of the functional and hydraulic system requirements that are considered when manufacturing hydraulic pumps. In addition, there are numerous design philosophies and hydraulic pump combinations to choose from. Due to this, only a few pumps can completely fulfill all needs. The most common types of hydraulic pumps have already been described.

The use of hydraulic pumps is still common in industrial settings. Elevators, conveyors, mixers, forklifts, pallet jacks, injection molding machines, presses (shear, stamping, bending, etc.), foundries, steel mills, and slitters are examples of equipment used in material handling. With an application"s need, a hydraulic pump is more likely to be used.

Additionally, hydraulic pumps are used in every conceivable mobile or industrial hydraulic machine. They are used on many different pieces of gear, such as excavators, cranes, loaders, tractors, vacuum trucks, forestry equipment, graders, dump trucks, and mining equipment. Mobile applications use hydraulic pumps more commonly than industrial applications since industrial devices typically don"t use electric actuators.

Since 1935, Muncie® Power Products has been a leading source of mobile power components to the truck equipment industry. In addition to Power Take-Offs and hydraulic motors, Muncie offers directional, pressure and flow control valves as well as system design capabilities. Call us today or visit our website for more information.

Hartmann Controls offers some of the most dependable hydraulic motors for industrial and mobile applications. Exceeding the capabilities of most other hydraulic motors, our products offer simplicity and precision for exact operations. Our superior motors can go for decades. Check out our catalog today! Our products are used by the world’s largest manufacturers and companies. Contact our company!

Planet Products Corp. is a contract manufacturer and manufacturer of various hydraulic products. Hydraulic products include motors, valves, and pumps. Planet serves mainly the defense, aerospace, machine tool, and industrial sectors and is ISO9001/AS9100 certified.

Precision Fluid Power sells new & rebuilt hydraulic motors. We also specialize in the repair of hydraulic components such as hydraulic motors, pumps, valves & cylinders. All units received for repair will be completely stripped down, cleaned and inspected, & any bad parts will be replaced. With over 150 years of experience we serve all industries, large or small. Please contact our company today!

AMETEK Dynamic Fluid Solutions makes your choice easy when it comes to motor selection. With a wide variety in products, many different motors, drive, and full system families are available in DC and AC motor configurations, “Your choice is our commitment.”

For 40 years, Bucher Hydraulics, Inc. has specialized in hydraulic systems, including products such as hydraulic motors and hydraulic power units. Applications include concrete pumps, forage wagons, harvesters, lifting devices, recycling machines, door openers, log splitters and many others.

Danfoss has 45 years of experience offering hydraulic motor solutions. We supply hydraulic power systems for moderate to heavy load demands. Our orbital motors have speeds extending from 2,500 rpm to 600 rpm. We also have hydraulic motors that vary in size from mini to medium to large.

Established in 1966, Delta Power designs and manufactures industrial hydraulic cartridge valves and manifold systems using these valves. We also produce hydraulic motors and hydraulic power units. Contact us for cutting-edge hydraulic system designs and products.

For more than four decades, Dynex/Rivett has been manufacturing hydraulic power systems and components. Our products include hydraulic motors, hydraulic power units and variable speed motors. We serve the worldwide market with our top-quality motors and hydraulic systems.

Eaton Hydraulics designs, manufactures and markets a comprehensive line of reliable, efficient hydraulic systems and components including hydraulic motors, hydraulic power units and other hydraulic systems. We serve various markets and applications with our quality systems and accessories.

Flint Hydraulics, Inc. is dedicated to the worldwide distribution of original and replacement hydraulic pumps, hydraulic motors, and hydraulic pump replacement parts for heavy mobile and industrial equipment. We maintain a database of more than 30,000 hydraulic pumps, motors and parts by OEM part number for name brands of heavy mobile equipment such as Caterpillar, J.I. Case, John Deere, Clark-Michigan, Terex, Grove, Komatsu-Dresser, Bobcat and many more. Located in the heart of America’s distribution center, Flint Hydraulics, Inc. has grown into one of the largest suppliers of original and replacement hydraulic products in the world. Off-the-shelf availability, coupled with the distribution center advantages Memphis has to offer, give us the unique ability to provide hydraulic components across the globe, using the most efficient and economical means available. We stock substantial quantities of pumps, motors, parts and assemblies and can ship at a moment’s notice anywhere in the world. Most items are available for same or next day shipment.

Our production facility is uniquely designed for assembly and testing of various types and designs of hydraulic pumps & motors to meet the just-in-time inventory requirements of our clients. Our professionally trained staff is the most knowledgeable and schooled customer service team in the entire industry. Equipped with the latest distribution software and our own custom-tailored cross-referencing databases, our staff is able to provide instant information regarding the particular hydraulic component your client needs.

Fluidyne Fluid Power is a leading industrial power distributor and manufacturing facility specializing in hydraulic motors, components and custom-designed fluid power systems. We have an extensive product line able to provide exactly what you need. They combine fluid power expertise with a vast selection of world-class components to provide you with unsurpassed system efficiency.

Haldex is a global provider of vehicle solutions, including hydraulic pump motors, hydraulic power units, gear pumps and fan drive pumps as well as AC/DC motors. Reduce emissions and innovative diesel engines with Haldex excellent solutions and customer service. We base our decisions and actions on the customer’s best interests. Contact us today!

An employee-owned company, Hydraquip is a distributor of fluid power products, including hydraulic motors from Hydro-Gear, Hydrokraft, Rineer Hydraulics, Rotary Power, Sauer Danfoss, Ultra, Vickers and Von Ruden. Since 1951, we have been serving the fluid power industry.

Need an old cylinder swapped or remanufactured? Need telescopic cylinders, replacement cylinders or hydraulic cylinders for large industrial equipment? At Hydraulic Repair & Design, we can supply all industries with new, custom or repaired cylinders, experienced design & friendly customer service!

Hydreco® Inc. offers a wide range of hydraulic gear motors as well as hydraulic pumps and valves. We offer drive axles, gearboxes, hydraulic pumps, gear pumps and piston pumps. Contact us today for more information on our quality products.

Over 50 years, Hydro Leduc has developed more than 100 patents because of our passion for innovation in the hydraulics field. We find solutions to our customers’ most complex and demanding applications for piston pumps, hydraulic motors, hydro-pneumatic accumulators and custom hydraulic components. A complete list of available motors and features can be found on our website. Contact a representative today for any further inquiries!

Since1967, Hydrotech has provided industries with innovative solutions for their fluid power needs. Our listing of hydraulic motors are manufactured by Bosch Rexroth, Rineer Hydraulics and White Drive Hydraulics. For more information call our experienced team of technicians and sales support!

Founded 40 years ago, Innerspace designs, develops and manufactures top-quality, efficient propulsion systems for marine vehicles. Our product capabilities include hydraulic products such as hydraulic motors and customized hydraulic systems. Check out our website for more information.

For over 50 years, MacTaggert Scott has been in the hydraulic motor business. Our radial piston hydraulic motors are used in various markets such as marine, offshore and defense. If you are looking for a hydraulic motor that runs quietly and efficiently, MacTaggert Scott is your answer. Call us today!

Our DVT Series of hydraulic motors started our hydraulic drive efficiency in the 1970s. We’ve developed more products and grown since then. Now we invite you to explore our MHA Series of heavy-duty, high-torque, low-speed, rotating shaft or rotating case hydraulic wheel motors. Check our website.

Since 1921, the world’s most demanding hydraulic control applications have relied on Oilgear high-performance fluid power solutions. We’ve met the challenge. Every time.Founded in Milwaukee, Wisconsin, Oilgear was built to bring only the most advanced engineering to our customers. Decades later, Oilgear continues to set the standard in industries requiring precise, high-performance hydraulic systems. From the depths of the ocean to the surface of the moon, Oilgear products often operate in the harshest of environments. We’re known for our robust line of pumps, but we offer so much more. No matter what your operations need, we have cartridge valves, subsea pressure control solutions and electrical embedded controllers to tackle your issues head on.

It might not seem possible, but we’re more than those products too. Oilgear is a worldwide provider of complex fluid power control system. We have a strong presence in forging and extrusion press control systems. And high-specification HPUs and high-pressure hydraulic systems.

With products operating in the toughest environments on earth, quality is Oilgear’s top priority. You can see it in our full collection of hydraulic control products and systems. We know what it takes to perform to ISO and API standards. And with an extensive history of earning certifications from institutions like ABS, DNV and Lloyds.

As an international corporation, Oilgear provides fully integrated manufacturing, service and training facilities in Scotland, Canada, France, Germany, Italy, Korea, Mexico, Brazil, Spain, the United Kingdom, China and the United States of America. We also have engineering support in more than 50 countries. All to bring you the products you need. And the products you don’t know you need yet.

Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs.

The Parker Pump & Motor Division specializes in gear pumps and motors used in a myriad of industries. With decades of experience, PMD provides the best products in the market, supplemented by best-in-class customer service, and the deepest knowledge in the industry.

The Perfection Machining Company was founded in 1964 to design and manufacture replacement parts for the mining industry. Renamed Permco 4 years later, the family-owned business developed a wide array of replacement hydraulic parts and eventually expanded its manufacturing capabilities to include cast iron parts and the resulting complete units. Today, we maintain our focus on customer service and continue a decades-long tradition of developing fluid power systems that meet each of our customer’s specific needs. Permco’s product offering now includes gear and vane pumps/motors, flow dividers, intensifiers and a variety of accessories and components. Permco offers the highest quality product possible to our wide customer base of OEMs and distributors. Because we understand that our success depends on the success of our customers, we are committed to reducing customers’ costs and increasing the simplicity of doing business with us.

We are committed to ensuring that our customers are more profitable by choosing Permco rather than anyone else. As a leading manufacturer of precision-engineered fluid power products, we design and build the best-value solutions that uniquely fit our customers’ needs. We operate the company by striving for profitable growth, increasing shareholder value, and providing opportunities for our employees to develop and grow. Permco understands the central role business plays in society and will always strive to be an example of Integrity, Service to our customers, employees, shareholders, and local communities

Poclain Hydraulics manufactures hydraulic motors, hydrostatic transmissions and high-torque cam-lobe motors, which are used in agriculture, construction equipment, industry, marine and material handling applications. Our innovative company culture motivates us to pursue progress and excellence in everything we do. Contact Poclain today to learn more!

Established in 1979, Southwest Seal and Supply has grown to become one of the most predominant distributors of sealing, hydraulic hoses, fittings, couplings/connectors, gasketing and fluid control products in the Southwest. We offer a wide range of products including the best in selection, quality, and value-added services.

Founded in 1945, Spencer Fluid Power remains a value added distributor of hydraulic components and systems. Spencer Fluid Power continues to sell and support hydraulic components to a wide array of customer types. Small to large OEM"s, timber, mining, construction and oil & gas are just a sample of the numerous industries Spencer supports today.

Sunfab was founded by Eric Sundin in the year of 1925. Sunfab develops, produces and sells components to operate hydraulic equipment within the area of mobile vehicles. After more than 90 years, the third generation of the Sundins are still running the company in the spirit of Eric Sundin, with a family atmosphere, flexibility and innovative solutions.

Wojanis Supply Company is a total fluid power facility encompassing sales, service, design and manufacturing capabilities for a full line of hydraulic motors, pumps, valves and integrated systems for a range of applications. Additionally, we are an authorized representative for many of the top component manufacturers allowing us to fulfill your every demand.

Hydraulic motors (sometimes incorrectly spelled as “hydrolic” motors) convert hydraulic pressure into force that is able to generate great power. They are a type of actuator that converts the pressure of the moving hydraulic fluid into torque and rotational energy.

Hydraulic motors are an important component overall in the field of hydraulics, a specialized form of power transmission that harnesses the energy transmitted by moving liquids under pressure and converts it into mechanical energy. Power transmission is a general term denoting the field of translating energy into usable, everyday forms. The three main branches of power transmission are electrical power, mechanical power, and fluid power. Fluid power can further be divided into the field of hydraulics and the field of pneumatics (translating the energy in compressed gas into mechanical energy).

Arguably, hydraulic power traces back to the beginnings of human civilization. For thousands of years, humans have harnessed the power of moving water for energy. (The most basic “hydraulic” application is harnessing moving water to turn wheels.) For a brief survey of hydraulic history, please refer to our article on Hydraulic Cylinders.

In terms of hydraulic motor development, the middle of the Industrial Revolution proved to be a notable turning point. During that year, English industrialist William Armstrong started developing more efficient applications of hydraulic power after observing inefficiencies in water wheel usage on a fishing trip. One of his first inventions was a rotary, water-powered engine. Unfortunately, this invention failed to attract much attention, but it provided an early model for a rotary actuator based on hydraulic power.

The use of hydraulic systems in general offer several advantages within the overall field of power transmission. Some of those advantages include efficiency, simplicity, versatility, relative safety, etc. These and other advantages are further elaborated on in our article on Hydraulic Pumps.

Hydraulic motors are able to produce much more power than other motors of the same size and for this reason are used for larger loads than electric motors.

When space constrictions are an issue, small hydraulic motors are used. Small hydraulic motors have small stroke lengths; they may be less than an inch.

A major disadvantage of using hydraulic motors is inefficient usage of the actual energy source. Power systems with hydraulic motors can consume large amounts of hydraulic fluid. For example, it is not uncommon for hydraulically-driven machines on construction sites to require 100 or more gallons of hydraulic oil to operate.

Since they are often confused in everyday language, it is important to distinguish between hydraulic motors and hydraulic power packs or hydraulic power units. Technically speaking, an enclosed mechanical system that uses liquid to produce hydraulic power is known as a hydraulic power pack or a hydraulic power unit. These packs, or units, generally include a reservoir, a pump, a piping/tubing system, valves, and actuators (including both cylinders and motors). It is not uncommon, however, to hear a hydraulic motor described as consisting of these components – a reservoir, a pump, etc. However, it is more accurate to describe a hydraulic motor as a part of an overall hydraulic power system that works in sync with these other components. Hydraulic motors are a type of actuating component within an overall hydraulic power system – a component responsible for actually translating hydraulic energy into mechanical energy.

Liquids represent a “median” state between gases and solids on the matter spectrum. Despite this, liquids represent solids far more than gases in an important aspect: they are virtually incompressible. One consequence of this is that force applied to one point in a confined liquid can be transmitted quite efficiently to another point in that same liquid. This reality forms the basis of the mechanical energy that hydraulic systems are able to produce. For a fuller explanation of how hydraulic power works, please refer to our article on Hydraulic Pumps.

It has previously been noted that “Pascal’s Law” applies to confined liquids. Thus, for liquids to act in a hydraulic fashion, it must function with some type of enclosed system. As noticed in the introduction, these “systems” are known as hydraulic power packs and share three main parts—a reservoir, a pump and an actuator—that work together to convert hydraulic energy into mechanical energy.

Hydraulic motors are an integral part of machines that rely on hydraulic power for operation because they actuate and “complete” the process of converting hydraulic energy into mechanical energy. Since hydraulic motors are fairly simple machines that are composed of rotating machinery, they specifically translate hydraulic energy into rotational mechanical energy. The main enclosure and interior components of the motor are made from metal such as steel or iron so they can withstand high pressures and operating speeds. In a sense, motors can be thought of as hydraulic pumps working “backward” or in reverse.

Overall, a hydraulic power unit pumps fluid (usually a type of oil) via a small pneumatic engine from a reservoir and sends it to the motor while regulating fluid temperature. Oil is pumped from the reservoir through an inlet valve to an outlet valve through a series of gears, turning vanes or cylinders, depending on what specific type of hydraulic motor it is. Pressurized fluid creates mechanical energy and motion by physically pushing the motor, causing the rotating components to turn very quickly, and transferring energy to the machinery that the motor is linked to. Typically, not every rotational component is directly connected to producing mechanical energy; for example, in a typical gear motor, only one of the two gears is connected to and responsible for turning the motor shaft. This type of operation directly contrasts with electric engines, in which electromagnetic forces produced by flowing electric current are the response for rotating the motor shaft.

Hydraulic motors, rotary or mechanical actuators which is operated by the conversion of hydraulic pressure or fluid energy to torque and angular displacement.

Driveshaft, a part of the hydraulic motor that delivers or transfers the torque created inside the motor to the outside environment where it is used for lifting loads and other applications.

Vane hydraulic motors have a hydraulic balance that prevents the rotor from sideloading the shaft, with the pressure difference develops the torque as the oil from the pump is forced through the motor.

There are three basic kinds of hydraulics motors: gear, vane and piston type. Each is identified by the design of the rotating component inside. Collectively, the various types of hydraulic motors are optimal for a wide range of specific applications, conditions or usages.

Another common type of hydraulic motor. Radial piston hydraulic motors have pistons mounted around a center shaft that is eccentrically balanced. Fluid causes the pistons to move outward, causing rotation. Axial piston hydraulic motors derive their name from the fact they use axial instead of radial motion, despite their similar design to radial piston motors.

Built into wheel hubs to supply the power needed to rotate the wheels and move the vehicle. A hydraulic wheel motor can operate a single wheel or multiple wheels, depending on the power of the motor and the size of the machine.

Other motors focus on the rotational speed and torque. High speed hydraulic motors convert hydraulic pressure into force at elevated rotations per minute thereby generating large amounts of power. High torque hydraulic motors run at low speeds while operating with increased torque, thus earning the name low speed-high torque (LSHT) motors.

Advances are still being made to hydraulic motors and their various applications. One example is the development of hybrid hydraulic automobiles, which are being developed as an alternative to gas/electric hybrid cars. Hybrid hydraulic vehicles are particularly efficient at reclaiming energy when braking or slowing down.

A type of orbital hydraulic motor, have rollers that are hydro-dynamically supported to minimize friction, ensuring maximum durability and high output at high pressure.

A type of orbital hydraulic motor, are particularly suited for long working cycles at average pressure. Rotor motors are operated by lobes that are fixed and set directly on the stator.

Hydraulic systems and their use are abundant in a wide variety of fields including construction fields, agricultural fields, industrial fields, transportation fields (e.g. automotive, aerospace), various marine work environments, etc. Hydraulic motors are commonly used in machinery that requires strong pressurized actions such as aircraft for raising the wing flaps, heavy duty construction vehicles such as backhoes or crane industrial lifting or for powering automated manufacturing systems. Hydraulics motors are also used in trenchers, automobiles, construction equipment, drives for marine winches, waste management and recycling processes, wheel motors for military vehicles, self-driven cranes, excavators, forestry, agriculture, conveyor and auger systems, dredging and industrial processing.

While hydraulic power transmission is extremely useful in a wide variety of professional applications, it is generally not recommended to use only one form of power transmission. Although it is somewhat counter-intuitive, the maximum benefit of each form of power transmission (electrical, mechanical, pneumatic, and hydraulic) occurs when each form is integrated into an overall power transmission strategy. As a result, it is worthwhile to put in an effort to find honest and skilled hydraulic manufacturers / suppliers who can assist you in developing and implementing an overall hydraulic strategy.

You should also make sure to discuss the pros and cons of different motors with your manufacturer in order to select the best one for your specific application. For example, vane motors generally cost less than piston type motors. However, they generally do not achieve the same efficiency as piston type motors, nor do they typically last as long. Properly identifying and weighing different factors such as these will enable you to choose the right motor for the right application.

Despite the apparent simplicity of hydraulic systems, engineers and manufacturers must take into account certain variables in order to build an efficient and safe device. The fluid used in the motor or system must be a good lubricant, first and foremost. It should also be chemically stable and compatible with the metals inside the motor. The pump, fluid reservoir and relief valves should be of appropriate power, capacity or strength to allow the motor to perform at optimum levels.

Problems with hydraulic motors can often be traced to poor maintenance, the use of improper fluid within the motor, or improper usage of the motor itself. Some not uncommon causes of motor failure are:

It is important to keep in mind that hydraulic motors are designed to function within certain limits which should not be exceeded. Those limits mainly include torque, pressure, speed, temperature, and load. To give one example, operating a hydraulic motor at excessive temperatures thins hydraulic fluid, negatively affects internal lubrication, and decreases overall the efficiency of the motor. Staying within a motor’s operational limits will preempt unnecessary and needless malfunctions.

In terms of safety, the relative simplicity of hydraulic systems and components (when compared to electrical or mechanical counterparts) does not mean they should not be handled with care. A fundamental safety precaution when interacting with hydraulic systems is to avoid physical contact if possible. Active fluid pressure within a hydraulic system can pose a hazard even if a hydraulic machine is not actively operating.

A container that stores fluid under pressure. Accumulators, the common types of which are piston, bladder and diaphragm, are used as an energy source or to absorb hydraulic shock.

The amount of fluid that passes through a pump, motor or cylinder in a period of time or during a single actuation event, such as a revolution or stroke.

Made in China, so it gets a 3 stasr. Replaced a rusted out unit with this, on a 2006 National RV Sea Breeze 8311. Removal was hard, it was rusted in place, lower bearing race was frozen in pump housing. Had to use penetrating fluid over a weeks time to break loose, tight place to use the race puller. The installation of the new motor was a breeze, aligned bolts and dropped right in, 20 minute job. A word on the install, seal the top of the motor to prevent moisture seeping into motor. My motor is installed directly below windshield washer fluid bottle, and is exposed in the grille area to rain driving down the road. I was able to rebuild old motor with bearing, and brush springs from Mcmaster and Cann. Will save as backup for made in CHINA unit.

As the new member of the Hydro product range, the hydraulic diaphragm metering pump Hydro/ 2 API 675 (HA2a) meets the requirements of API 675. The pumps stand ...

The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To reduce heat loss, Rexroth external gear ...

... and accessibly priced, aluminium gear pumps and motors are among the components most widely utilized in the field of hydraulic applications. Gear pumps ...

Gear pump with reversible Rotation direction and internal drainage. Built in aluminium body, lighter than casting pumps, permits to work at high pressures with a low level of noise.

Gear pumps with heavy duty body, side and rear ports. Double support by taper roller bearings on the agricultural shaft with modified length. Specialty: agriculture long shaft.

Like all the pumps of the HP Series, it is suitable for any hydraulic application which require very high hydraulic output pressures and a moderate and controllable oil flow, to ensure ...

The HP-AP pump, like all HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series air-hydraulic ...

The HP-RC pump, like all the HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series ...

Three piece pumps with aluminum body and flanges, available in single or multiple pump configurations. Stackable with pumps of different families. Wide range of shafts and flanges. Configurations ...

The product range of Bucher Hydraulics includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, ...

... describes Marzocchi external single gear micropumps, ¡heir operating features and hew to select the right pump for the required application. Miaopumps are small hydraulic ...

This electric/hydraulic pump is a two-stage, continuous pressure (demand) pump that contains all the necessary controls and circuitry for powering any single- or double-acting

Gear pumps GP1K Group 1 is an Ideal solution for hydraulic power packs. Modern technologies and many years of experience of the HYDROSILA company allow us to create pumps ...

The pump series Eco-MAX developed by ITH is built for standard applications like service and assembly jobs. The pump series is available in two different designs:

The OMFB offers wide array of gear pumps available for utilization in applications that requires medium, high and very-high pressure of up to 320 bar maximum. These pumps also strictly ...

The pump with a maximum flow rate of 300 bar is specially designed to lessen a volume by means of a fixed crank-driven piston within a cylinder. It has 3 and 4 bolt ISO flange, swash plate and bent axis design piston ...

Some of these hydraulic pumps are examples of gear pumps. Gear pumps can be operated in a number of ways. Electric hydraulic pumps are often equipped with gears as a method of transmitting liquid from one area to another. Many other gear pump varieties are powered by gas motors. Hydraulic gear pumps are used in the automotive, agricultural, construction, defense contracting and manufacturing industries.

There are two main hydraulic gear pump varieties: external gear pumps and internal gear pumps. External gear pumps feature two spur gears, both of which gears" spurs are externally oriented. Internal gear pumps also have two spur gears, each gears" spurs are internally oriented, with one gear rotating around inside of the other gear.

Both kinds of gear pumps supply a regular amount of liquid for every rotation of the gears. Hydraulic gear pumps are favored because of their relatively simple design, their versatility and their effectiveness. Also, because they are available in multiple configurations, they can be applied in a wide variety of contexts in industry as well as in commercial and consumer products contexts.

Because of the wide variety of contexts in which hydraulic pumps are used, and because of the varying kinds of tasks that require the use of pumps within each of those contexts, the demand for hydraulic gear pumps, as well as many other hydraulic pump varieties, is likely to remain for the foreseeable future.

BRAND NEW!! RV/MOTORHOME HWH SOLENOID LEVELING VALVES. READY TO SHIP!! PRICE $329.00 - FREE SHIPPING! CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

READY TO SHIP. CONDITION - USED. PRICE $900.00 + SHIPPING. RV/MOTORHOME USED EQUALIZER SYSTEMS HYDRAULIC PUMPS. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFO)

READY TO SHIP. PRICE $450.00 + SHIPPING. USED RV/MOTORHOME GENERATOR SLIDE-OUT HYDRAULIC PUMPS. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

READY TO SHIP. PRICE $900.00 + SHIPPING. USED RV/MOTORHOME EQUALIZER SYSTEMS HYDRAULIC PUMPS. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

READY TO SHIP. PRICE $700.00 + SHIPPING. USED RV/MOTORHOME EQUALIZER SYSTEMS HYDRAULIC PUMPS. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

PRICE $900.00 + SHIPPING. USED RV/MOTORHOME EQUALIZER SYSTEMS HYDRAULIC PUMPS. READY TO SHIP. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY AP10470. READY TO SHIP. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMP. ASSEMBLY: AP24800. READY TO SHIP. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP36775. READY TO SHIP. PRICE $900.00 PLUS SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP32424. READY TO SHIP. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

PRICE $900.00 + SHIPPING. ASSEMBLY: AP32387. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. READY TO SHIP. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP30451. READY TO SHIP. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME EQUALIZER SYSTEMS HYDRAULIC PUMPS. READY TO SHIP. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

ASSEMBLY: AP32375. READY TO SHIP. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME EQUALIZER SYSTEMS HYDRAULIC PUMPS. READY TO SHIP. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP32827. READY TO SHIP. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP30475. READY TO SHIP. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP32424. READY TO SHIP. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

READY TO SHIP. PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP30219. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP14421. READY TO SHIP. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

READY TO SHIP. PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP33105. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP35331. READY TO SHIP. PRICE $900.00 + SHIPPING. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

READY TO SHIP. PRICE $450.00 + $24.99 SHIPPING. USED RV/MOTORHOME POWER PACKER GENERATOR SLIDE PUMPS. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSEMBLY: AP32375. READY TO SHIP. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

READY TO SHIP. PRICE $900.00 + SHIPPING. USED RV/MOTORHOME HWH HYDRAULIC PUMPS. ASSMELBY: AP38539. CALL VISONE RV (606) 843-9889. (CLICK FOR MORE INFORMATION)

The true depth of our knowledge lies within the diagnosis and repair of hydraulic pumps and other hydraulic products. Whether we have your unit in stock or not, the repair is always an option. In fact, it may be your best option for obsolete and hard to find hydraulic pumps, motors, valves, and servos.