prince hydraulic pump rebuild kit supplier

Prince PTO pumps are specifically designed for PTO drive operation on all sizes of farm tractors. No additional gearbox is required. Pumps are mounted by sliding the internally splined pump onto the PTO splined shaft and restraining rotation with a torque arm. See page P6 for the PTO pump torque arm kit.

Prince Manufacturing Corporation"s Quality Management System is certified to ISO 9001:2015 by Orion Registrar, Inc, as are each of our manufacturing facilities.

The kits listed below are for the popular PRINCE Hydraulic Cylinders. The kits contain all of the seals needed for a complete rebuild of your cylinder.

We do not imply that all of the parts listed above are necessarily produced by the manufacturers shown on this page. Jack model numbers and repair kit numbers are shown for reference purposes.

No opened kits or installed parts may be returned for credit and no returns will be accepted after 30 days from date of shipment. A copy of the invoice must be included to receive credit. All returns are subject to a 20% restocking charge. Freight charges are not refundable. Prices are subject to change without notice and we reserve the right to correct pricing errors. Freight charges in effect at time of shipment will be charged.

Prince Gear Pumps are manufactured by Prince Manufacturing Corporation, who pride themselves in being a premier manufacturer of high-quality hydraulic pumps.  Their engineering expertise, state-of-the-art manufacturing equipment and strong employee work ethic attribute to the long-life and durability of their products. Beiler Hydraulics has many configurations of Prince pumps in stock but if you are searching for a pump you don"t see on our website please contact us and we will be glad to check our inventory or special order the pump you need.

The SP20B pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

Priority flow divider pumps split the flow between a priority port and an excess flow port. The flow is initially directed to the priority port until the priority setting is satisfied. At that time any additional flow is directed to the excess flow port. Priority divider pumps are typically used in steering circuits, brake circuits or any circuit where a primary flow needs to be satisfied first.

The SPD1 series of double pumps consists of two SP20B pump sections. The SP20B pump utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

Just consider a top link cylinder. A top link cylinder is often used as an extension of your agricultural tools. You can install the top-link cylinder as an improved connection point for three-point equipment. When you upgrade to a hydraulic cylinder, you are getting the power of pressurization to provide more motion and force. In this way, the hydraulic top link cylinder will stabilize your power transfer applications.

When choosing your top link cylinder, look carefully at the action. In most cases, you will be picking from single or double action cylinders. A category one top-link cylinder will be compatible with machines with horsepower between 25 and 55. These cylinders can operate at 3,000 PSI. When installed properly, the top link cylinder will make your three-point hitch operations much smoother. The hydraulic cylinder can control the forward-aft motion of the hitch. This is imperative when multiple tools are hitched together, and you can operate the cylinder by connecting it to an existing remote circuit on your machine. Many people choose a top link cylinder for their tractors, and it can serve as a key connection piece with other farm equipment.

Given the important role, a top link cylinder can play in your daily operations, it is imperative to work with the best cylinder manufacturer and the best hydraulic supplier. Fortunately, you can be confident of both when you choose to order through Magister Hydraulics. At Magister Hydraulics, we are proud of our selection of hydraulic supplies, and our options for a top-link cylinder are unparalleled. If you want to learn more, please contact our customer service team at 1 (973) 344-5313. You can also fill out the online contact form.

Price Engineering specializes in engineered custom products and solutions through engineering resource management, research, planning and development in the areas of hydraulics, pneumatics, automation and electrical systems.

Since 1965, Carotek has been providing process equipment solutions for the industrial, commercial and municipal markets in North Carolina, South Carolina, Tennessee, Georgia and Virginia. Carotek represents over 85 manufacturers as their process equipment distributor, representative, and repair service center for pumps, blowers, heat exchangers, valves, instrumentation, IIoT, steam, hydronics and municipal products. Carotek also fabricates process systems for our customers - complex process skids, electrical control automation systems and seal pots, as well as valve automation units, pump and blower skids.

Founded in 1969, P.S.I. has been providing superior hydraulic components and service to their customers for over 50 years. P.S.I. is structured into specialized business segments that serve the Marine, Mining, Oil, and Forestry Markets. P.S.I. is headquartered in Richmond, BC, Canada, with associates across five locations providing strong sales coverage throughout Western Canada. P.S.I."s commitment to quality combined with excellent service has resulted in the company becoming one of Canada"s largest and most trusted distributors of hydraulic components, electrical controls, and specialized fire suppression systems.

Perfection Servo developed a reputation as one of the leaders in industrial repair services quickly after opening its’ doors in 1979. We’re a ISO 9001:2015 certified business and our customers have learned to rely on the quality work that our technicians put into repairs in hydraulics, electronics, servo, and mechanical equipment. We understand that your business depends on a repair partner that will get you running quickly, which is why we repair and test units back to OEM specs to ensure our repair gets your line running again.

Our premier one-stop service and repair centers are at your disposal, regardless of your base of operations. We provide our unique brand of quality specialized services worldwide, covering a wide range of electronics, hydraulics, robotics, servos and mechanical repairs and remanufacturing.

K+S Services is ISO 9001:2015 registered and has locations throughout North America. Our team of skilled technicians have the ability to fully support the repair and service of electronics, hydraulics, mechanicals, motors, valves, spindles and torque tools. We offer free evaluations with the option for expedited repair and a 12 month in-service warranty with all of our repairs. Our repairs are system tested in our dynamic test stands. With our experience performing repairs on over 122,000 unique part numbers from more than 860 manufacturers, you can rest assured that K+S has the solution for you.

Amazon Hose & Rubber Company has a rich history of over 100 years of servicing the hydraulic and industrial hose and fitting market. With 5 locations across the state of Florida, our inventory features a wide range of hoses, tubing, fittings, pumps, v-belts, valves, clamps, spill containment and many other products. Our custom fabrication sets us apart as the leading hose and fitting distributor in the Southeast. Amazon Hose, a GHX Company, is able to cover a broad spectrum of applications for the industries we serve.

This is 1 seal kit for the hydraulic cylinders found in forward 2 post lifts. It meets or exceeds factory specs. It fits lifts with capacity between 7,000 & 10000 pounds. This kit rebuilds Prince cylinders that forward used through many years of production. This seal kit will rebuild ONE cylinder if you need to rebuild both cylinders in your lift you will need TWO seal kits.

If your lift has a Prince cylinder in it, it will be approximately 72.5″ tall and hang from the top of your lift with a chrome shaft coming out of the bottom of the barrel. Look approximately 8″-10″ below the very top of the cylinder (top of your lift where the bolt goes through the cylinder to anchor it to the lift) see ID stampings (see stamping example in pic #3). If it reads “Prince” or “AN” followed by numbers this is the proper seal kit for your lift. Also compare the gland /end cap of your cylinder to the one pictured on the left. The gland on a prince cylinder has 2 holes on the face of it for a spanner wrench. It protrudes about an 1/8″ out of the barrel of the cylinder and is flush / even with the barrel outside diameter (see pics 4 & 5 for gland id). If you have your cylinder apart already, compare your piston seal with the one pictured to the left. Prince cylinders have distinctive black, middle humped seal on the piston (pic 2 seal on left). If you are still unsure if this seal kit will work for you, call our help hotline @ 866-902-6060 and we will be glad to determine what seal kit you need.

This kit came in the following model lifts and may fit others as well dp07a , dpo7 , dp09 , dpo9a , dpo9a2 , dpo9s , dpo9s2 dp97 , dp97a, DP97A2 , dp97s , dp97s2 9000a , 9000an , 10000a , 10000a2 , 10000an , dp10 , dp10a , dp10an , dp10a2 , INT9 , ISP9S , I10 , I10111000

If you see the letters “AA”, “T” or “TX” followed by #s or your gland is not the same design as the one pictured then your cylinder is not a PRINCE and this seal kit will NOT work with your lift, but we offers those seal kits as well in our related products section below.

Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag. If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first. Call us at 866-902-6060 if you have any questions about this product or any other auto equipment questions.