pto gearbox <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> pricelist

Brand new cast iron made P.T.O gearbox is ideal for adding hydraulic power to tractors and landscape equipment not already equipped with hydraulic circuits, or in need of auxiliary hydraulics. Used to power hydraulic Auger, front-end loaders, mowers, rotary sweepers, etc. These gearboxes are used mainly for connecting hydraulic pumps to the power take-offs of agricultural tractors. It is powerful enough to transfer the load of 100 LPM @ 2850 psi. Please note the last photo is of the gearbox fitted with a Vivoil Group 3 pump. This pump is not included in this sale, it is purely to show how this looks once you mount a pump.

These PTO speed increases can be used with either a Group 2 DIN mount pump, or a Group 3 DIN mount pump. See other listings for a PTO Speed increaser complete with a pump. This listing is just the speed increase box with a pump shaft spline adapter. If you supply your own pump, it needs to be CW, clockwise rotation.

If running your PTO at ; 540 RPM x 3 = 1620 RPM . Then multiply the pump CCs. ie. 39cc x 1620 = 63180ccm / 1000 = 63LPM Please allow for approx 20% pump inefficiency, so if after 60LPM, go up to 43cc pump, 1620 x 43 =69LPM less 20% = 56 PM

The standardized PTO output of 540 Rpm is, in this way, increased x 3:1 to optimum operating speeds for the hydraulic pumps. This gearbox and pump offer either direct or remote mounting options to the tractor P.T.O to provide independent hydraulic service. This gearbox itself is rated to provide up to 37 KW or 50 HP to the hydraulic gear pump. This figure is nothing to do with your engine horsepower, only the power the gearbox is able to transfer to the hydraulic pump(see chart below) Female or Male shafts are the same prices.

This comes with standard Female 1-3/8" 6 splined shafts generic to most PTO output shafts. This step-up gearbox has a ratio of 3:1 which means, if your PTO is spinning at 540 RPM, it will step up the speed to 1620 RPM.

The main considerations in choosing the correct size pump for your application; are the amount of Flow required & the pressure required. As the need for higher pressure (PSI) is increased, the power required to produce this pressure rises. It is easy to pump fluid at a high flow rate if low psi is required, but it takes a lot of HP to pump high flow rates at a high PSI.

pto gearbox <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> pricelist

The PTO gearbox and pump assemblies are ideas for adding power to tractor or landscape equipment not already equipped with hydraulic circuits. Use to power hydraulic motors front end loaders, mowers, and rotary sweepers. The gearbox and pump range offer either direct or remote mounting options to the tractor PTO to provide independent hydraulic service.

The Pump kit is consists of an aluminum-alloy housing and a high-strength hydraulic PTO gear pump. With bearable steel gears and shafts, it has an extending product life cycle, more sturdy and durable.

The spline type shaft runs coordinately with the hydraulic gear pump, rotated in clockwise. Gear Ratio: 1: 3.8. The whole PTO pump set can work under the condition that the Max pressure is 250bar / 3500psi.

The PTO gear pump with its speed up to 540rpm, with its power in 20kw and runs in a low noise condition. There are two oil ports for oil inlet and outlet respectively, fast and convenient, capable of quick oil output.

This tractor PTO pump with an excellent performance in pumping out oil with its displacement of 25 cc/rev, 53 liters per minute. No worries about oil trapping or leaking.

The whole set PTO gearbox hydraulic pump includes a clockwise gearbox with a long tube sleeve, and inside gear pump. A free seal ring helps to ensure no oil leakage.

With excellent performance and high efficiency, it is widely used in many industries such as agricultural, garden, and transportation, to power hydraulic motors front end loaders, mowers, and rotary sweepers.

pto gearbox <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> pricelist

This Brand new Italian-made P.T.O gearbox and pump assembly are ideal for adding power to tractors and landscape equipment not already equipped with hydraulic circuits. Used to power hydraulic Auger, front-end loaders, mowers, rotary sweepers, etc.

These aluminium gearbox housings and hardened steel internal gears are used mainly for connecting hydraulic pumps to the power take-offs of agricultural tractors.

The standardised PTO output of either 540 or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps. This gearbox and pump offer either direct or remote mounting options to the tractor P.T.O to provide independent hydraulic service.

This comes with standard Female 1-3/8" 6 splined shafts generic to most PTO output shafts.(photos) If your shaft has " grooves", there is an Optional Shaft "Quick release" coupler available for an extra $40. Also available at no extra cost is a Male shaft. There is the option of a few other couplers so feel free to ask or send photos for confirmation.

There are a variety of pump sizes to choose from, please see the drop box next to the photos. All are the same price. The main considerations in choosing the correct size pump for your application are the amount of Oil Flow and the pressure required.

As the need for higher pressure (PSI) is increased, the power required to produce this pressure also rises. It is easy to pump fluid at a high flow rate if low psi is required, but it takes a lot of HP to pump high flow rates at high PSI pressures.

Please refer to our chart below, & feel free to message or call with any queries. We also supply reusable field fit hydraulic hose fittings hose and & any hydraulic valves or adaptors you require.

40 Lpm @ 1800 psi is the most flow, the pressure this size gearbox can reliably sustain. Warranty is void if run at over 1800Psi with a pump larger than 20cc. If more flow is required, please check our next size-up gearbox

PLEASE NOTE BELOW All Hydraulic pumps typically have a 20% efficiency loss factor. The numbers supplied below are gross figures, please take 20% for the correct PM

We carry many types of adaptors, threads, hydraulic hose, and field fit hose fittings available please see our other listings or contact us for great prices & service.

pto gearbox <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> pricelist

1254 pto gearbox hydraulic pump products are offered for sale by suppliers on Alibaba.comAbout 1% % of these are construction machinery parts, 1%% are other hydraulic parts, and 1%% are hydraulic pumps.

A wide variety of pto gearbox hydraulic pump options are available to you, such as new, used.You can also choose from piston pump, gear pump pto gearbox hydraulic pump,as well as from 1 year, 6 months, and 1.5 years pto gearbox hydraulic pump, and whether pto gearbox hydraulic pump is hydraulic power units, fittings, or valves.