rear pto hydraulic pump pricelist

Prince PTO pumps are specifically designed for PTO drive operation on all sizes of farm tractors. No additional gearbox is required. Pumps are mounted by sliding the internally splined pump onto the PTO shaft and restraining rotation with a torque arm.

2250 PSI MAX PRESSURE. 10 micron filtration required. Reservoir should be at least equal to pump GPM output. Maximum operating temperature 180 deg. F. External relief valve required - maximum setting 2250 PSI.

Features: Aluminum center housing, standard duty cycle, reduced weight, rear ported, higher flows at reduced engine RPM compared to other pumps, simplified hose connections

This brand new Italian-made P.T.O (Power Take Of) comprises a 3:1 speed increase Gearbox and Hydraulic Gear Pump. It is ideal for adding Hydraulic power to tractors and landscape equipment that are not already equipped with hydraulic circuits.

Used to power hydraulic Auger, front-end loaders, mowers, rotary sweepers, Post Hole Borers, and Post Drivers. These gearboxes are used mainly for connecting to the power output shaft at the rear of the tractor to drive hydraulic pumps to generate fluid power.

The standardized tractor PTO output of either 540 (turns into 1620 Rpm) or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps.

This gearbox and pump offer either direct or remote mounting options to the tractor P.T.O to provide independent hydraulic service. This gearbox is rated to provide up to 20 KW or 27 HP to the hydraulic gear pump. This figure is nothing to do with your engine horsepower

This comes with standard Female 1-3/8" 6 splined shafts generic to most PTO output shafts. (photos) If your shaft has " grooves", there is an Optional Shaft "Quick release" coupler available for an extra $40.

Please see the last photo which shows the "groove" in the PTO shaft which fits the "Quick" release. Also available at no extra cost is a Male shaft. There is the option of a few other couplers so feel free to ask or send photos for confirmation

This step-up gearbox has a ratio of 3:1 which means, if your PTO is spinning at 540 RPM, it will step up the speed to 1620 RPM. There are a variety of pump sizes to choose from, please see the options next to the photos. All are the same price.|The main considerations in choosing the correct size pump for your application, is the amount of flow required & the pressure required. As the need for higher pressure (PSI) is increased, the power required to produce this pressure rises.

It is easy to pump fluid at a high flow rate if low psi pressure is required, but it takes a lot of HP to pump high flow rates at a high PSI. Please refer to our chart below, & feel free to message or call with any queries.

Please take careful note of the flow & pressures in the chart below. This unit is rated for up to 10Kw hydraulic power only. If you require more flow & higher PSI, please see our other size gearboxes/pumps in the agricultural category of our store.

Brand new P.T.O gearbox and pump assemblies are ideal for adding power to tractors and landscape equipment not already equipped with hydraulic circuits. Used to power hydraulic Auger, front-end loaders, mowers, rotary sweepers etc.

The gearboxes are used mainly for connecting hydraulic pumps to the power take-offs of agricultural tractors. PTO output, standardised at either 540 or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps. At 540 Rpm, the output speed is 1620 RPM

his step up gearbox has a ratio of 3:1 with a Group 3 Din Mount 1:8 tapered shaft gear pump.at 540rpm the gearbox will produce 1620 rpm, giving a flow rate of litres per min; these are examples (other incremental pump sizes available,) Please note; This gearbox is rated for a maximum of 20 kW hydraulic power. If you oversize the pump, & run at a higher pressure than is stated in the chart below, internal stress will cause the gearbox to fail prematurely

We also sell quality control valves, re-usable hydraulic hose ends, hydraulic hoses, quick couplers, hydraulic cylinders and much more Please call 0755 716155 hosefixersaustralia@gmail.com

This brand new Italian-made P.T.O (Power Take Of) comprises a 3:1 speed increase Gearbox and Hydraulic Gear Pump. It is ideal for adding Hydraulic power to tractors and landscape equipment that are not already equipped with hydraulic circuits.

Used to power hydraulic Auger, front-end loaders, mowers, rotary sweepers, Post Hole Borers, and Post Drivers. These gearboxes are used mainly for connecting to the power output shaft at the rear of the tractor to drive hydraulic pumps to generate fluid power.

The standardized tractor PTO output of either 540 (turns into 1620 Rpm) or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps.

This gearbox and pump offer either direct or remote mounting options to the tractor P.T.O to provide independent hydraulic service. This gearbox is rated to provide up to 20 KW or 27 HP to the hydraulic gear pump. This figure is nothing to do with your engine horsepower

This comes with standard Female 1-3/8" 6 splined shafts generic to most PTO output shafts. (photos) If your shaft has " grooves", there is an Optional Shaft "Quick release" coupler available for an extra $40.

Please see the last photo which shows the "groove" in the PTO shaft which fits the "Quick" release. Also available at no extra cost is a Male shaft. There is the option of a few other couplers so feel free to ask or send photos for confirmation

This step-up gearbox has a ratio of 3:1 which means, if your PTO is spinning at 540 RPM, it will step up the speed to 1620 RPM. There are a variety of pump sizes to choose from, please see the options next to the photos. All are the same price.|The main considerations in choosing the correct size pump for your application, is the amount of flow required & the pressure required. As the need for higher pressure (PSI) is increased, the power required to produce this pressure rises.

It is easy to pump fluid at a high flow rate if low psi pressure is required, but it takes a lot of HP to pump high flow rates at a high PSI. Please refer to our chart below, & feel free to message or call with any queries.

Please take careful note of the flow & pressures in the chart below. This unit is rated for up to 10Kw hydraulic power only. If you require more flow & higher PSI, please see our other size gearboxes/pumps in the agricultural category of our store.