rehobot hydraulic pump in stock

We always want to be close to our customers, to offer the best possible service, and to facilitate your business when you need an expert on high pressure hydraulics. Therefore, we have for a long time worked with a wide distribution network across large parts of the world. Click below to find a distributor in your area!

The REHOBOT two stage PHS hand pumps come equipped with a pressure gauge as standard. The gauge provides the user with precise control over the pressure being developed. The gauge is directly mounted onto the pump and well protected by the specially designed pump lever. The two stage function makes the pump easier to operate, permitting the cylinder or hydraulic tool to reach its working position significantly faster compared with single stage pumps.

Hand pumps in the PHS series are available with 1000 bar, 1500 bar, 2000 bar and 2800 bar working pressure and with the choice from 300 cm³ up to 2400 cm3 effective oil capacity.

The pump is equipped with a safety valve that limits the output pressure. The safety valve is set at the factory to the maximumworking pressure. Internal safety valve prevents the user from overpressure.

When accessories are selected for a hydraulic system, the working pressure rating for these shall be equal to or higher than the pump unit"s maximum working pressure. For hoses we recommend a 3-4 fold safety margin between the hydraulic system"s maximum operating pressure and the burst pressure of the hose. It is also important to ensure that the pump"s effective oil volume exceeds the total volume of oil in the hydraulic system, preferably with a safety margin of about 20%.

The REHOBOT two stage PHS hand pumps come equipped with a pressure gauge as standard. The gauge provides the user with precise control over the pressure being developed. The gauge is directly mounted onto the pump and well protected by the specially designed pump lever. The two stage function makes the pump easier to operate, permitting the cylinder or hydraulic tool to reach its working position significantly faster compared with single stage pumps.

Hand pumps in the PHS series are available with 1000 bar, 1500 bar, 2000 bar and 2800 bar working pressure and with the choice from 300 cm³ up to 2400 cm3 effective oil capacity.

The pump is equipped with a safety valve that limits the output pressure. The safety valve is set at the factory to the maximumworking pressure. Internal safety valve prevents the user from overpressure.

When accessories are selected for a hydraulic system, the working pressure rating for these shall be equal to or higher than the pump unit"s maximum working pressure. For hoses we recommend a 3-4 fold safety margin between the hydraulic system"s maximum operating pressure and the burst pressure of the hose. It is also important to ensure that the pump"s effective oil volume exceeds the total volume of oil in the hydraulic system, preferably with a safety margin of about 20%.

REHOBOT pumps have a functional design to withstand rough handling in harsh environments. They can be used in many different applications & industries. The pumps can be used with all hydraulic tools and cylinders in the REHOBOT’s product range.

REHOBOT pumps are used worldwide and every possible environment. Some examples can be found within the engineering, automotive, mining and petrochemical industries.

Our designs are based on long experience within the field of hydraulics. The results are pumps that are easy to operate, repair and service - saving time and money for our customers! The life expectancy of REHOBOT products leads the market. Our pumps provide power that last for generations!

Hydraulic hand pumps – Are lightweight, portable and do not require an external power source. These pumps are cost effective, easy to use, and are ideal for workshop or field use applications.

Air hydraulic pumps – A cost effective option for faster and more efficient operations. No manual effort required by the operator. Portable and ideal for workshop use, only standard air-line supply required. Field use is feasible if access to a compressor is available.

Electrical hydraulic pumps – The best option where large capacities of oil is required: e.g. multiple cylinder operations. By the addition of different valve types, these pumps can easily operate multiple tools. The electric pumps are suitable in stationary installations.

Petrol hydraulic pumps – An excellent alternative where, field operations are required: e.g. construction sites and shipyards. No external power source is required.

Should you be unable to find a pump to suit your requirement in the following series and table, please contact REHOBOT to discuss your application in detail.

To ensure complete operator safety at all times we recommend the fitting of a pressure gauge (AMT801) with gauge adaptor (AVM204) to this series of hand pumps.

When accessories are selected for a hydraulic system, the working pressure rating for these shall be equal to or higher than the pump unit"s maximum working pressure. For hoses we recommend a 3-4 fold safety margin between the hydraulic system"s maximum operating pressure and the burst pressure of the hose. It is also important to ensure that the pump"s effective oil volume exceeds the total volume of oil in the hydraulic system, preferably with a safety margin of about 20%.

De kompakta PPxx-1000 lufthydrauliskapumparna kan användas horisontalt eller vertikalt. Pumparna kan enkelt manövreras viahand eller fot.Pris exkl moms.

Rehobots storsäljare levereras med slang, nippel och klocka.Samtliga REHOBOT’s tvåstegshandpumpar i PHS-serien är utrustademed manometer vilket ger en stor kontroll över arbetet. Manometernär helt integrerad i pumpen och sitter skyddad i ett urtag i spaken.Pris exkl moms.

REHOBOT’s hydrauliska avdragare är designade för tuffa industriella appliaktioner. Avdragarna finns tillgängliga i storlekar mellan 5 till 44 tons dragkraft. Den robusta konstruktionen säkerställer att verktyget står pall för många års användning.Pris exkl moms.

Manufacture of high-pressure hydraulic products and systems based in Eskilstuna, Sweden. The company"s products include hydraulic cylinders, hydraulic pumps, lifting products, hydraulic tools, and rescue equipment, thereby enabling the creation and develop smart technology for a safer workplace.

Motors, other than for land vehicles; machine coupling and transmission components, except for land vehicles, and parts therefor; agricultural implements, other than hand-operated, namely, incorporators; jacks machines, namely, pneumatic jacks, power jacks and electric jacks; hydraulic jacks; belt tensioners for motors and engines used in industrial machines; hoists; stands for machines, namely, stands for lifting tables; pumps for machines; machine pumps; valves being parts of machines; bending machines; drilling machines; driving motors, other than for land vehicles; milling machines; punching machines; mechanical tools, namely, milling cutters, mechanical spreaders, pile-extractors and bushing assembly for conveyor pulleys; hand-held tools, other than hand-operated, namely, hydraulically actuated tools, namely, milling cutters, mechanical spreaders, wire tensioning tools, press dies for metal forming, rotary compressors, pile-extractors and bushing drivers; hydraulic engines and motors; printing cylinders for printing machines; compressed air pumps; industrial compressed air engines; hydraulic lifts; hydraulic pumps; elevating apparatus, namely, elevating work platforms; hydraulic lifting gears for machines; cylinders for machines; tightening machines, namely, power operated belt tensioners; material handling machines, namely, pallet stabilization machines; hydraulic hammers; stands for hydraulic jacks; hydraulic actuated pliers being parts of constructing machines; power operated pressing machines for fitting and removing bearings and bushings; cutting machines; cylinders being parts of machines; spreading machines, namely, mechanical spreaders; hydraulic door openers and closers being parts of machines; door openers, hydraulic; hydraulically actuated mechanical reels for flexible hoses being parts of machines; valves as machine components; hydraulic valves as machine components; clutches for machines; couplings of metal for hydraulic apparatus being parts of hydraulic machines; metal working machine tools

Rehobot (previously NIKE) pumps have a functional design to withstand rough handling in harsh environments in all heavy-duty commercial vehicle workshops . The pumps can be used with all hydraulic tools and cylinders in the Rehobot’s product range.

In the United States market, you can purchase Rehobot PP80B-1000 with competitive prices and fast delivery options through our experienced sales team.

Enapart is not aothorizedUnited States distributor ofRehobot . All brands and trademarks which shown in this website are owned by their respective owners