riken seiki hydraulic pump manufacturer

ExxonMobil is a trusted partner for thousands of industrial original equipment manufacturers. They know our products will help keep their machines running longer and more efficiently. See below for relevant equipment and product information for Riken Seiki Co., Ltd. - A Group company of Riken Piston Ring.

Located at Bhavnagar (Gujarat), Hydro Trading was established by Mr. Tasavuer Hussain (Owner), in the year of 1998. His inspirational and motivational approaches have always been a key to success. With his support, we have been able to garner a vast base of clients across the nation. Hydro Trading, have acquired a revere position in the domain of Ship Equipment. We are a major Supplier of Hydraulics Pumps, Hydraulics Cylinder, Hydraulic Jacks, Hydraulic Puller, Submersible Pump and Airless Painting Machine.

"A single acting cylinder is operated by the remote controlled operating switch. The pump stops automatically and the cylinder returns at a preset pressure of the pressure switch"

"A single acting cylinder is operated by the remote controlled operating switch. The pump stops automatically and the cylinder returns at a preset pressure of the pressure switch"

Foreword Thank you very much for purchasing this electrically powered pump produced by Riken Kiki Ltd. This manual explains the use and safety features of these motor powered pumps and contains information valuable to both experienced and also first time users of these electrically powered pumps.

(7) Ensure that the Operation Switch is turned off before inserting the power cord plug into a   power source otherwise the pump will start, causing the cylinder piston to extend and the   pump to create pressure. (8) To prevent electric shock, ensure the pump earth wire is connected to the electrical plug and  ...

(15) Do not grip the high pressure by hand when pressure is being exerted. If the pressure hose   breaks while it is being gripped by hand, high pressure hydraulic oil will be suddenly   dispersed, and serious injury such as a hole being opened in one s hand may occur. (16) The high pressure hose is a consumable item.

Oil Tank   Reservoir for the storage of hydraulic oil. Motor   Motor for driving the pump. Operation Switch (SW-4A)   Manual switch for starting and stopping the motor.   Length of the cord is 3 meters. Power Cord   Length of the cord is 3 meters.   100V specifications is for insertion plug (2P 12A 125V with earth clip).

（２） ＳＭＰ−３０Ｂ、 ＳＭＰ−４０Ｂ Operation Switch Hydraulic Circuit Diagram (SW-4A) Pressure Switch (SPS-7A) Pressure Gauge Attachment Opening (G1/2) Direction Control Valve (SMV-33) Shape of Power Cord Tip Discharge Outlet 100V (Rc3/8) 200V・230V Weight：14.5kg (When Using 2L tank) High Pressure Switch (SPS-7A)   Pressure can be variably adjusted from 10 to 70 MPa.

（４） ＳＭＰ−３０ＳＫ、 ＳＭＰ−４０ＳＫ Operation Switch Hydraulic Circuit Diagram Pressure Switch (SW-4S) (SPS-7A) Pressure Gauge Attachment Opening RETURN (G1/2) Direction Control Valve (SSL-2B) Shape of Power Cord Tip Discharge Outlet 100V (Rc3/8) 200V・230V Weight：14.5kg (When Using 2L tank) Operation Switch (SW-4S)   A manual switch containing a crimp switch for starting and stopping the motor and a push   button switch for returning.

（６） ＳＭＰ−３０ＮＥ、 ＳＭＰ−４０ＮＥ Hydraulic Circuit Diagram Pressure Switch (SPS-7A) Operation Switch Direction Control Valve (SW-4WP) (KD-2C) PUSH Pressure Gauge Attachment Opening PULL (G1/2) Shape of Power Cord Tip Discharge Outlet 100V (Rc3/8) 200V・230V Weight：19kg (When Using 2L tank) Operation Switch (SW-4WP)   A manual switch for starting and stopping the motor and operating the direction control valve.

（８） ＳＭＰ−３０Ｃ、 ＳＭＰ−４０Ｃ Hydraulic Circuit Diagram Operation Switch Pressure Switch (SW-4A) (SPS-7A) Pressure Gauge Attachment Opening (G1/2) Direction Control Valve (SMV-43) Shape of Power Cord Tip Port B 100V Port A 200V・230V Discharge Outlet Weight：15.5kg (Rc3/8) (When Using 2L tank) High Pressure Switch (SPS-7A)   Pressure can be variably adjusted from 10 to 70 MPa.

（10） ＳＭＰ−３０ＤＶＨ、 ＳＭＰ−４０ＤＶＨ Hydraulic Circuit Diagram Pressure Switch Operation Switch (SPS-7A) (SW-4A) Pressure Gauge Attachment Opening (G1/2) Direction Control Valve (SMVH-43) Shape of Power Cord Tip Port B 100V Port A 200V・230V Discharge Outlet Weight：17kg (Rc3/8) (When Using 2L tank) High Pressure Switch (SPS-7A)   Pressure can be variably adjusted from 10 to 70 MPa.

（12） ＳＭＰ−３０ＳＷ、 ＳＭＰ−４０ＳＷ Hydraulic Circuit Diagram Pressure Switch (SPS-7A) Operation Switch KD-3S (SW-4WP) (with check) Direction Control Valve PUSH (KD-2S) PULL Pressure Gauge Attachment Opening (G1/2) Shape of Power Cord Tip Port B 100V Port A Discharge Outlet 200V・230V (Rc3/8) High Pressure Switch (SPS-7A) Weight：20.5kg   Pressure can be variably adjusted from 10 to 70 MPa.

（14） ＳＭＰ−３０ＳＬ、 ＳＭＰ−４０ＳＬ Hydraulic Circuit Diagram Pressure Switch (SPS-7A) Operation Switch (SW-4WP) Pressure Gauge Attachment Opening (G1/2) PUSH PULL Direction Control Valve (KD-3C) Shape of Power Cord Tip Port B 100V Port A 200V・230V Discharge Outlet (Rc3/8) Weight：18.5kg High Pressure Switch (SPS-7A) (When Using 2L tank)   Pressure can be variably adjusted from 10 to 70 MPa.

WARNING         Carefully check the increase in oil temperature and motor heating when the pump  is used continuously, and be sure to follow the time regulation for each pump. CAUTION         Use general-purpose ISO VG32 oil with the electric pump (for example,  RIKEN POWER OIL).

Parts List ＳＭＰ−３０ＮＶ、 ＡＲ、 ＳＫ ＳＭＰ−４０ＮＶ、 ＡＲ、 ＳＫ Quantity Part Name Notes Pump Body O-Ring NOK S120 Bolt w/ Hexagon Socket M6×14 Bolt w/ Hexagon Socket M5×14 Cam Axis Series 30 Cam Axis Series 40 Needle Bearing Bearing Holder Deep-Grove Ball Bearing Piston O-Ring JIS B 2401 P10A...

Parts List ＳＭＰ−３０Ｂ、 ＢＲ、 ＮＥ、 ＲＫ、 Ｃ、 ＤＣＢ、 ＤＶＨ、 ＣＲ、 ＳＷ、 ＳＰ、 ＳＬ ＳＭＰ−４０Ｂ、 ＢＲ、 ＮＥ、 ＲＫ、 Ｃ、 ＤＣＢ、 ＤＶＨ、 ＣＲ、 ＳＷ、 ＳＰ、 ＳＬ Quantity Part Name Notes C DCB DVH CR SW SP Pump Body O-Ring NOK S120 Bolt w/ Hexagon Socket M6×14 Bolt w/ Hexagon Socket M5×14...

After Sales Service and Repair. Before contacting your sales representative or sales agent to request service or repair to your Riken pump, read the contents of this manual thoroughly and inspect the fault again. If the problem persists, please contact either your sales agent or your local service representative who will arrange for repairs to be carried out.

We, TKK Corporation, as a leading manufacturer of Hydraulic Equipment,Pneumatic Equipments, Vacuum Equipments such as Air Cylinder, Hydraulic Cylinder, Solenoid Valve, Rotary Joint, Vacuum Ejector.