sae a hydraulic pump factory

Gear Pump Manufacturing (GPM) manufactures a complete range of internationally interchangeable commercial components for Bearing gear pumps, Bushing gear pumps, Motors and Flow Dividers.

Commissioned in February 2002, our Foundry is located on the same site as our manufacturing facility in Cape Town. Expansion has mirrored that of GPM.

Currently the foundry produces Grey Iron, SG Iron and Compacted Graphite Iron. Superior metallurgical structured CGI material is used in the manufacture of the higher pressure requirements of our Bushing Pump Range. The foundries production is dedicated to the requirements of GPM and has sufficient capacity to handle the expected growth into year 2018.

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

2GG7U04L HONOR HYDRAULIC PUMP, GEAR TYPE, SAE A 2-BOLT, 3/4" 11-TOOTH SPLINED SHAFT (1.25" LONG), CCW ROTATION, 0.24 CUBIC INCH DISPLACEMENT, 3500 PSI CONTINUOUS, 4200 PSI INTERMITTENT, 600-4000 RPM RANGE, SIDE PORTS, #12 SAE O-RING INLET, #10 SAE O-RING OUTLET, VITON SEALS, PRESSURE BALANCED PUMP FOR HIGH EFFICIENCY, HONOR 2GG7U04L

Hydraulic pumps are mechanical devices that convert mechanical energy into hydraulic energy. They generate flow with enough power to overcome pressure induced by the load. Hydropack offer group 20 external gear pumps with different specifications.

Hydraulic pumps are mechanical devices that convert mechanical energy into hydraulic energy. They generate flow with enough power to overcome pressure induced by the load. Hydropack offer group 20 external gear pumps with different specifications.

This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86.

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. However, you may visit "Cookie Settings" to provide a controlled consent.

Lamentamos que los botones estén en inglés. Desafortunadamente, no pudimos hacer que este módulo funcione correctamente en español. Usamos cookies en nuestro sitio web para brindarle la experiencia más relevante recordando sus preferencias y visitas repetidas. Al hacer clic en "Accept All", acepta el uso de TODAS las cookies. Sin embargo, puede visitar "Cookie Settings" para proporcionar un consentimiento controlado.

This pump line offers aluminum body construction, high pressure hydraulic gear Pump with 11 displacement sizes from 0.24 to1.95 cu.in/rev. 4 to 32 cm3/rev . The standard mounting flange is SAE A – 2 bolt, The standard drive Shaft is a 5/8 inch Dia.meter straight with 5/32 straight key.

Equipped with bi-directional check valves, the Chief MH Series series features small displacement and high pressure ratings. The MH series Pump/motors have an aluminum body with cast iron flange construction, and case drain. Available displacements range .065 to.517cu.in/rev. Similar to MTE “D” series and Sauer-Danfoss Webster YB series.

The SP20B pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs. Our division is the result of the Parker piston pump business’s acquisition of Denison Hydraulics and merger with the Parker Oildyne Division. Reach higher hydraulic working pressures, get better reliability, higher efficiencies, and achieve lower operating costs and improved productivity on your heavy-duty equipment with Parker’s line of piston pumps and vane pumps, electro-hydraulic actuators, hydraulic motors and power units, piston motors and hydrostatic transmissions.

Applications include but are not limited to pumps & pumping equipment, oil royalty traders, oil & gas extraction and oil, gas field machinery, axial piston pumps, gear pumps, gerotor pumps, variable volume pumps and hydraulic power units.