sae a hydraulic pump price

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

D25 DELTA POWER HYDRAULIC PUMP, GEAR TYPE, 0.981 IN3 DISPLACEMENT, MOUNT IS 2 BOLT SAE A, 5/8" ROUND X 1"KEYED X 2"LONG SHAFT. PILOT IS 3.250", 1000RPM CONTINUOUS, 3000 RPM MAXIMUM, BIDIRECTIONAL, 3/4"NPTF REAR PORTS. SIDE LOAD CAPABLE

D21 DELTA POWER HYDRAULIC PUMP, GEAR TYPE, 0.411 IN3 DISPLACEMENT, MOUNT IS 2 BOLT SAE A, 5/8" ROUND X 1"KEYED X 2"LONG SHAFT. PILOT IS 3.250", 1500RPM CONTINUOUS, 5000 RPM MAXIMUM, BIDIRECTIONAL, 3/4"NPTF REAR PORTS. SIDE LOAD CAPABLE

Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power.

Hydraulic pumps are mechanical devices that convert mechanical energy into hydraulic energy. They generate flow with enough power to overcome pressure induced by the load. Hydropack offer group 20 external gear pumps with different specifications.