schwing hydraulic pump factory

Proper cooling of the hydraulic oil is critical to continuous operation under demanding conditions. In addition, filtration is the single most important method of keeping the hydraulic system operational. That’s why the Schwing G3 design continuously draws hydraulic oil from the tank and circulates it through the filter and high efficiency cooler. Even when the concrete pump is not engaged, this separate hydraulic circuit continues to operate for protection and performance.

Redesigned for 800 LPM of oil, the 3 High Flow Control Block is the brain for the all hydraulic system. The block incorporates the Soft Switch into the relief valve and the accumulator manifold into the S3 spool valve for a compact, simpler design. Multi Port Shifting is an important part of the twin circuit system, which uses accumulator pressure to switch the S3 valve. Faster switching of the S3 translates to smoother pumping. The S3 block and system accumulator are separated from the control block and located near the hopper for easy access.

The material cylinders contain rubber rams that are connected to the differential cylinder rods. One side will push the concrete through the Rock Valve™ while the opposite side will draw concrete from the hopper. Now available with up to 10 inch (250mm) diameter and 98-inch (2500mm) stroke length, G3 pumpkits deliver 30% more concrete with every stroke than competitive brands. Fewer strokes translate to smoother pumping, less wear and longer boom life.

The hydraulic pumps for the concrete pump circuit are bent axis, variable displacement, piston pumps. They are horsepower controlled, which means that as pressure rises towards maximum, the flow can decrease, so the power consumption remains constant. This pump assures that the truck engine will not bog down under difficult pumping conditions. The pump also accepts external signals from the hydraulic stroke limiter for control of the output.

Come to a Schwing Service Seminar and gain a deeper understanding of maintenance, troubleshooting, and safety. Schwing Service Seminars are divided into two levels to fit your needs. We start with classroom basics and move all the way through hands-on troubleshooting. Get the most out of your equipment today by attending a Schwing Service Seminar.

Seminar fees include lunch and transportation between Schwing and the hotel, transportation from the airport and the hotel is not included. Attendees will also receive the Service Manual on CD-ROM along with a printed copy of the Training Manual. Airfare, hotel and evening meals are not included.

We will process your application and send you a seminar confirmation along with lodging information and maps from the airport to the hotel and Schwing facility. (NOTE: We will make the hotel reservation for you. All students stay at our designated hotel. Rates per evening are approximately $80.00 plus tax.)

Schwing truck mounted boom pumps provide reach, versatility, and unparalleled reliability. A wide range of boom configurations combine with long stroking pumpkits for smooth pumping performance. Open loop hydraulics combine with the Schwing Rock Valve providing owners and operators performance, reliability, and the lowest total cost of operation. Harsh mixes are no problem for Schwing’s legendary Rock valve that cleans out faster with less water than any other valve, allowing operators to increase profits by completing more jobs per day.

The new hydraulic oils Classico, Ultimo and Organico from SCHWING-Stetter are specially tailored to the requirements of SCHWING hydraulic systems and ensure excellent power delivery and comprehensive protection of the hydraulic components. With Ultimo high-performance hydraulic oil, the oil change intervals are more than doubled. For more operating times and less downtimes.

Originally designed to pump concrete, the Schwing Bioset piston pumps adapt easily to the rigors of wastewater treatment plant service with a proven history of reliability and ease of maintenance. Many units have operated continuously for years with 99% availability. Schwing units pump dewatered biosolids from Belt Presses, Centrifuges, Plate and Frame Presses, and Rotary Presses with dry solids content up to 56%. The pumps have volumetric capacities over 310 GPM and operating pressures up to 1,885 psi.

Our hydraulically actuated positive displacement piston pumps are designed to transport virtually anything that can be fed into them. Equipped with either electric or diesel drives and controlled by local PLC or remote SCADA systems, these work-horses are capable of transporting tailings, slimes, slurries, pastes and other abrasive, viscous, and difficult to handle materials.

Hundreds of successful installations in the harshest operating conditions on the planet speak to the durability of Schwing Bioset piston pumps. All hydraulic switching, open loop hydraulics, electronic power control, soft-switching, and continuous flow are just some of the features found on our pumps.

Never satisfied with the status quo, we are continually pioneering new technology and new features to improve our piston pump technology. Our R&D efforts have led to numerous proprietary features found exclusively on Schwing Bioset pumps that provide our Customers with top-of-the-line performance and monitoring capabilities. Features like run-dry protection, flow measurement systems, and hydraulic ideal control circuit technology are only found on Schwing Bioset pumps.

Schwing GmbH is a German manufacturer of mobile and stationary concrete pumps and truck mixers, headquartered in Herne, as well as the parent company of Schwing Stetter in Memmingen. The business group is the world"s second largest concrete pump manufacturer, behind Putzmeister, also a German manufacturer and subsidiary of the XCMG group. The company employs more than 3300 people worldwide in seven countries. In addition, there are individual distribution companies in more than 100 countries.

The Schwing Group was founded as a medium-sized enterprise on 17 March 1934, by Friedrich Wilhelm Schwing (* 1909; † 1992), a locksmith from Wanne-Eickel. In 1957, Schwing built the world"s first oil-hydraulic two-cylinder concrete pump. Starting in 1964, the company also built the first large concrete mixers. In 1965, the company launched its first concrete pump which was mounted on a vehicle, and improved it in 1968 with the addition of a distribution mast. In 1973, the company built a high-speed concrete pump vehicle with a 45-meter-wide large distribution mast, an outstanding innovation at that time. In 1976, Schwing launched the first residual concrete processing plant on the market.

After the company founder handed over the company management to his two sons in 1980, they acquired the company Stetter GmbH in Memmingen in 1982, which produced truck mixers. The company"s market domicile and the company"s portfolio expanded. The company was now able to offer combined mixers with a concrete pump mounted on it and developed into a market leader.

At the end of the nineties there was a dispute between the owners, the company was about to sell to an American company. With the help of banks, a state guarantee and private assets, Gerhard Schwing succeeded in buying his brothers shares.XCMG for €300 million.

Avoid any downtime at your construction site with the range of schwing hydraulic pump from Alibaba.com. You can check out the fully-stocked parts at Alibaba by manufacturer and model and affordable wholesale prices. The wholesale schwing hydraulic pump collection of spare parts from China’s wholesaler, Alibaba, fits well with a wide range of heavy-duty equipment, from bulldozers, excavators, and hammers, among others. Plus, you can find parts for your tractors, skid steer loaders, wheel loaders, backhoe loaders, and crawler dozers.

If you have a limited cash allocation, the used or remodeled parts will go a long way in accommodating your budget. Alibaba’s schwing hydraulic pump and tools make it easy to replace, modify and enhance your equipment for their optimal performance. For electrical and mechanical applications, you can find your match at Alibaba.com for everything you need to make your vehicle perform better. Get engine oils, batteries, hydraulic parts, transmissions, injectors, hoses, and starters from the schwing hydraulic pump at Alibaba.com.

The new parts from manufacturers have warranties, and you can buy them by matching the part numbers. Such parts, including hoses, plugs, or filters, will help you quickly deal with downtime on site. The used parts, on the other hand, sell for a lower price. Remember, Alibaba partners with sellers who have certificates of operation. So, you can use these second-hand schwing hydraulic pump to get your heavy machine running. You can also get rebuild models from the collection at Alibaba.com. These are sustainable choices that use recycled materials and perform as well as the new parts. And depending on your seller of choice, you might get a warranty to accompany them.

Repair, Rebuild. Repaint. Refurbish. Retruck. And delivering results. Everything we’ve learning building the world’s leading concrete pumps drives how we professionally service all your concrete pumping equipment. Certified BOOM and DOT inspections service your peace of mind. The most trusted name in concrete pump technology is here to restore confidence in equipment needing a shot in the arm. Or a state-of-the-art paint job. This isn’t only a one-stop shop. It’s an only-stop shop.

Trustworth Infracore Private Limited,establishes in the year of 2013in Bengaluru, Karnataka, (India) are the leading eading Wholesale Trader and Exporter of Hydraulic Pumps, Concrete Pump Spare Parts, Excavator Spare Parts, Hydraulic Pump Spares, Soil Compactor Spares and many more. We are also a Service Provider of Pump Repair Service. The main motive of our company is to provide goods of superior quality at affordable prices. In very mean time, we become pioneer in this domain among other which is only possible by our strong workers efforts. This ground requires technical innovative things which is essential for the firm to maintain in this place last long. Corporation has an ultra and high tech infrastructure which is placed in departments and units who help in producing goods in stipulated time and in huge to fulfill the demands. Many new tools are engaged in the sections for good flow of transitions without any type of hindrances and same is kept in the warehouse in customized way to protect from uncertainties. All the time there is the keeper to look after the products. With the high tech technologies and inventive thoughts, everything is done in appropriate way. Association laid necessary improvements for the sake of the consumers. In order to supply most adorable commodities many changes are made like the packaging quality is modify just for attracting more buyers and for safely delivery of them in mean time frame. Different modes of payments are held for their conveyance while they ordered them.

With a shortage of used equipment, now is the time to consider evaluating you equipment needs. With more than 20 years experience, CPR- a Schwing Company, can provide a FREE equipment evaluation of your fleet to go over the options for current and future capital equipment needs, whether it be to:

To request your Free Fleet Evaluation complete the evaluation form. CPR will contact you to discuss your pump and get started on long-term cost savings with CPR.

Trust your Pre-Owned Purchase to the factory that built it. Only Schwing has the resources to advise you on the best pre-owned pump for your needs. Our research can track a concrete pump from its delivery to its current condition. Schwing’s archive of service reports and bulletins assures you that your pre-owned pump has been updated to the latest safety and performance parameters. View our inventory or call our remarketing specialist. We may have an owner ready to sell the pump that fits your needs at an attractive price.

Trust the remarketing of your trade-in or underutilized pump to the company that knows it best. Schwing’s global network gives you access to qualified buyers who have a need for reliable used concrete pumps. That’s why Schwing pumps have the best resale value in the world. Get an appraisal from our remarketing specialists before you sell on the open market. Maximize your trade value and take advantage of the tax benefits that may result from trading in your pump. We are interested in your trade-in on a new or used concrete pump. Contact our remarketing specialists to see about upsizing to a larger pump or trading for a specialty pump to expand your pumping potential.

Select your Pre-Owned pump and choose to recondition it with Schwing. You will benefit from OEM levels of quality and craftsmanship along with Genuine Schwing parts. Everyone knows a Pre-Owned Schwing is a great investment. Often, reconditioned Schwings offer better value than new pumps from other manufacturers. Contact your regional manager for more information.

Schwing can provide factory-level service and repair to bring your pre-owned purchase to the level that meets your needs and budget. Buy with confidence when you choose any of the following treatments for your pre-owned concrete pump.