single gear hydraulic pump for sale

Hydraulic single gear pump for sale. Available displacement 13/15/18/20 Max. GPM, maximum pressure 3600 psi, speed 500~3500 rpm, optional clockwise or counterclockwise rotary. The small hydraulic gear pump has applications in automobile, hardware, industrial machinery, textile, commercial machinery, chemical equipment, environmental protection, military industry, national defense, etc.

Hydraulic single gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.

Hydraulic single gear pump is suitable for SAE standard flange installation. The input shaft connection is woodruff key. Connection type of the oil inlet and outlet ports is thread.

Hydraulic single gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.

DU composite material bearings and high-performance sealing elements, small starting torque, good sealing performance, and strong anti-fouling ability, so that hydraulic single gear pump can work efficiently under harsh working conditions.

20 GPM hydraulic single gear pump internal parts wear and tear will cause internal leakage. Among them, the large leakage area between the floating shaft sleeve and the gear end surface is the main part that cause internal leakage. This part of leakage accounts for about 50% to 70% of the total internal leakage. For the 20 GPM hydraulic single gear pump with internal leakage, its volumetric efficiency drops, and the output power is much lower than the input power. All of its losses are converted into heat, which will cause the 20 GPM hydraulic single gear pump to overheat. If the bonding plane is pressed tightly, a small amount of movement of the floating shaft sleeve during work will cause abrasion. As a result, the oil cylinder will rise slowly or cannot be lifted. Such floating shaft sleeves must be replaced or repaired.

Good price hydraulic single gear pump from professional manufacturer. Displacement 2/3/4/6/7 Max. GPM for selection, pressure 3000~3600 psi, maximum speed 4000 rpm, optional clockwise or counterclockwise rotary. Wide applications includes automobile, hardware, industrial machinery, textile, commercial machinery, chemical equipment, environmental protection, military industry, national defense, etc.

Hydraulic single gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.

Hydraulic single gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.

DU composite material bearings and high-performance sealing elements, small starting torque, good sealing performance, and strong anti-fouling ability, so that hydraulic single gear pump can work efficiently under harsh working conditions.

The working medium of ATO hydraulic gear pump is 32#, 46#, 68# hydraulic oil. Customers provide detailed specifications such as use medium, use environment (temperature), use pressure, working speed, etc. ATO can professionally customize hydraulic gear pumps for various fluid media (excluding solid particles and flocs).

Confirm the structure: single pump, tandem pump, triple pump and the position of the oil inlet and outlet (side, bottom, front), special oil inlet direction needs to be customized.

Rotation direction: viewed from the shaft end of the hydraulic gear pump, clockwise rotation is right rotation, and counterclockwise rotation is left rotation. The matching motor should rotate in the opposite direction to the pump. Installation in the wrong rotation direction will directly cause damage to the hydraulic gear pump.

Outer diameter of shaft extension: shaft diameter, flat key, spline or special connection mode. At this time, the serialized model of the hydraulic gear pump was basically determined.

Shop Bobcat hydraulic pumps online! You can easily browse by model on the left hand column. Specifically, you can filter by make or model to locate the type of pump you need for your Bobcat equipment. We have single, double, and triple gear hydraulic pumps available to you.

If you need a hydraulic pump replacement for your Bobcat equipment, let Loader Parts Source be your source. Our company stands out from the competition because we care about not just getting the right part to you, but also about providing knowledgeable troubleshooting advice and technical assistance so that you can install and use it properly. Contact us today for Bobcat hydraulic pump replacement services.

Founded in 2008, the services that Loader Parts Source provides today initially started when Levi Burkholder opened his own hydraulic repair business in 1996, called Burkholder Repair, in Wakarusa, IN. After about ten years in business, Levi closed Burkholder Repair and opened LPS.

Since its openings in 2008, LPS has grown from just providing hydraulic pump services to also offering undercarriage parts, starters, engines, alternators, seals, bearings, radiators, and more.